OMNI REMOTES VRC4100B Verizon RCU Remote Control User Manual
- June 13, 2024
- OMNI REMOTES
Table of Contents
OMNI REMOTES VRC4100B Verizon RCU Remote Control
Product Information
Product Functions
Auto Pairing Mechanism| RCU can start auto pairing if it is not paired:
- Point at STB and press MIC button, RCU starts undirected
advertising for pairing, LED will blink. - If pairing is successful, LED will provide a Pairing Success
blink. - If pairing is failed, LED will provide a Pairing Failure
blink.
Voice| RCU features a button to activate the Voice Search application
to search for content by speaking through the remote’s built-in
microphone. The RCU supports one-way voice transferred from RCU to
host.
OTA Upgrade| The RCU software supports upgrade via OTA (Over-The-Air).
Product Usage Instructions
- To initiate auto pairing:
- Point the remote at the Set-Top Box (STB).
- Press the MIC button on the remote.
- The remote will start undirected advertising for pairing, indicated by a blinking LED.
- If pairing is successful, the LED will blink to indicate Pairing Success.
- If pairing fails, the LED will blink to indicate Pairing Failure.
- To activate Voice Search:
- Press the designated button on the remote.
- Speak into the remote’s built-in microphone to search for content.
- To perform OTA upgrade:
- Ensure the RCU is connected to the internet.
- Follow the provided instructions to initiate the OTA upgrade process.
Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Caution
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Risk of explosion if batteries are replaced by an incorrect type. Only use AA alkaline batteries.
FCC Information
FCC ID : 2AGOFRC473A
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Statement
This equipment complies with the FCC radiation exposure limits set forth
for an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter. Consult the
dealer or an experienced radio/TV technician for help.
Picture for reference only
User Manual
Verizon RCU VRC4100B (RTL8762CKO)
Products Functions
The VRC4100B remote control is primarily designed via BLE to connect with
Verizon RF set-top box. This connection is needed to control all essential
features that Verizon offers, including browsing content, playing videos, and
conducting voice searches. BLE are also used for over-the-air firmware
upgrades as well as the download of TV control codes.
The remote further includes infrared (IR), used to control a TV/Audio when it
is connected to the STB. Prior to this, the RCU needs to be configured via
Omnis’s simple setup.
Product Summary
- The RCU has 33keys, BLE transceiver, microphone, IR transmitter, RGB LED indicator, buzzer, white backlight, Accelerometer.
- The RCU supports BLE (HID keys, voice & OTA), TV/Audio-IR (SSU), Findme.
Auto Pairing mechanism
RCU can start auto pairing if it is not paired:
- Point at STB and press MIC button, RCU starts undirected advertising for pairing, LED will blink.
- If pairing is successful, LED will provide a Pairing Success blink.
- If pairing is failed, LED will provide a Pairing Failure blink.
Voice
RCU features a button to activate the Voice Search application to search for
content by speaking through the remote’s built-in microphone.
The RCU supports one-way voice transferred from RCU to host.
OTA upgrade
The RCU software supports upgrade via OTA (Over-The-Air).
Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Caution:
- Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Risk of explosion if batteries are replaced by an incorrect type. Only use AA alkaline batteries.
FCC information
FCC ID: 2AGOFRC473A
FCC Statement: This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
RF exposure statement
This equipment complies with the FCC radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.