AUDIOCENTER WM210-DSP Active DSP Wedge Monitor User Manual

**WM210-DSP Active DSP Wedge Monitor
User Manual

**

Product Introduction

Thank you for purchasing WM210-DSP Wedge Monitor from Audiocenter. They have integrated technologies of switch mode power supply, big power digital amplifier, and DSP control. as well as speakers made of new materials. It is the result of years of R&D effort. We hope that you can use it with pleasure. just as how we designed it. Please finish reading the manual before usage, to make sure the best performance of WM210-DSP. Please keep the manual for future reference.

**** Safety Precautions

A When you set up. install and use the WM210-DSP. please follow the following safety measures strictly:

• There can be danger in any step during hanging installation. Everyone should pay attention to personal safety. All purchasers of Audiocenter should be professional people qualified to conduct the work related to such equipment.
• We strongly suggest that users pay full attention to local rules, regulations, and laws. Installers have the responsibility to make sure the speaker installations are subject to local rules, regulations, and laws.
• If any danger or defect is detected, measures should be taken immediately to correct it.
• In the touring application, please choose the installation hardware and occasion that can sustain the weight of the equipment.
• Please do not try to hang speakers over the design standard.
• When connecting the cables of the products, please use a cable tie to fix the cables, to avoid actors, workers, and audience falling on the wire or brackets and affecting the speaker system.
• Please do not place the speakers near equipment sensitive to magnetic fields, such as CRT displayers, TV, or data-saving materials.
• Please do not place the power cable near the heating source. Do not overbend or damage the power cables. Do not place heavy things on it Please do not place the cables that may be pressed or cause stumbling.
• Only the specified rated voltage should be used for this product. Please refer to the back panel of the product for the specified voltage.
• Only the supplied power cable or plug should be used. (If you need to use the product in a place different from the purchase place, please consult your local Audiocenter distributor.)
• Please check the power cable or plug regularly
• Please make sure to connect to the proper power socket with a protection grounding connection. Wrong grounding may cause short circuits.
• The product inside does not include any component that can be repaired by users. In case of abnormal operation, please stop using it immediately, and contact a qualified Audiocenter maintenance worker to repair it.
• Please do not use the product in the rain, near water, or in a humid environment, to avoid liquid spilling into any opening.
• When any of the following situations occurs, please cut the power immediately, pull out the power plug from the socket, and ask a qualified Audiocenter maintenance worker to repair it. — Wear or damage the power cable or plug. — Abnormal smell or smoking. –Some substance falls into the product. –Sound stops suddenly when using the product.
• If the product falls or is damaged, please turn off the power switch immediately. Pull out the power plug from the socket, and ask a qualified Audiocenter maintenance worker to repair it.
• When pulling out the power plug from the power socket or the product please make sure to grab the plug instead of the power cable. Pulling the power cable directly may cause damage.
• If the product is not used for a long time, or there is a thunderstorm, please pull out the plug from the socket.
• Please do not place the product in any uneven position. Otherwise, it may cause falling off suddenly.
• If the product is not fixed safely, please do not place it in a position that may cause easy falling.
• Please do not block the air hole. The product has an air hole at the back to avoid the internal temperature being too high. Bad ventilation may cause damage to the product or even fire.
• Please do not hang or install any other component to the handle of the speaker. It may cause damage or injury.
• Please do not press the back panel of the product to the wall. Otherwise, the plug may touch the wall and separate from the cable, and cause short circuits, malfunction, or even fire.
• Before connecting the product to other equipment, please turn off the power switch of all equipment. Before turning on or off the power switch of all equipment, please turn down the volume to the minimum.
• Please do not use the product at a very high or uncomfortable volume. Otherwise, it may cause permanent damage to your ear.
• In case of sound distortion, please do not use the product. To continue using the product in such a status may cause a fire.
• Using mobile phones near the speaker may cause noise. In case of noise, please use the mobile phone far from the speaker.
• If you need service, please contact the Audiocenter service center, agent, or distributor in your area.
  **** In order to avoid causing you or others’ body Injury and loss on equipment or property, please make sure to follow the above basic Items.

Warranty
We ensure all the Audiocenter products are high-quality and professional goods, no matter the performance or the craftwork. Before delivery, every single piece of product is checked by us for outlook and also automatically tested by equipment for high standard sound quality, then QC passed. From the date you buy our goods, you will own the service free of charge for 3 years. Product warranty items and Guarantee (China Mainland only)

1. The products warranty period is 3 years (starting from the date buying the products). During the warranty period, if any damage or fault in our goods, after the Audiocenter technician verified the issue was not caused by wrong operation and usage or unexpected damage during transportation, Audiocenter will repair the products and exchange the spare parts free of charge.
2. Because of the long distance for overseeing transportation and other changeable factors, the warranty for 3 years is for China mainland only.
3. If under the below conditions, the Audiocenter distributor and dealers will reserve the right to reject any repair. a) Products were not bought from Audiocenter dealers or distributors, or it is fakery. b) Factory serial number is invalid, damaged already, obliterated, removed, or no sale record.
4. Under the below-mentioned conditions, information on the warranty card or website will be invalid.

1. The issue was caused by the intentionally wrong operation.
2. Problem or fault caused is by wrong handling, incorrect operation, or unexpected damage
3. The issue is caused by inefficient outer conditions, such as oversize input voltage and huge humidity.
4. The damage caused by the accident or natural hazard.
5. Products were repaired by other people, not by Audiocenter technicians.
6. Installation of the products in the wrong way.

5. Warranty and maintenance of the goods are only for Audiocenter service centers or appointed distributors.
6. If products are damaged directly or indirectly due to the equipment being defective, Audiocenter won’t take any responsibility.
7. If Audiocenter products are out of warranty period, a reasonable fee will be charged for the repair.
8. Audiocenter has the final right to interpret the above terms and conditions and is subject to change without notice. To contact us, please call 020-86767882 or visit our website at www.audiocentecnet.

Product Warranty Registration.

• Users fill one warranty card in duplicate. (Packed with user manual inside the bag, content is as below drawing.) Then send one of the parts to Audiocenter distributors within 30 days.
• Users also can log into Audiocenter’s official website www.audlocenter.net to register the effective warranty serial number. (Route: Home/product center/ product warranty register).
• If you need to repair the goods, you are required to show out the invoice and warranty card.
• Related information of goods on the official website will be the support for the service.

Package accessories:

• Power cable
• User’s manual
• Quality certificate Please check the above items carefully. If any questions, please advise the Audiocenter representatives, dealers, or distributors, or contact them by email box. aiaattaaCcP02a.

Optional accessories:

• Flightcase
• Cover bag

WM210-DSP Technical Features

• Features:

1. The innovative BrainCoren technology and built-in powerful DSP processor improve the performance of the speaker. With Corr’s, correction technology, and Llmitam processing technology, the system works with safety and reliability and achieves supreme performance.
2. 3 different presets: FLAT, VOCAL, and DRUM, users can choose the preset according to their needs via the switch on the back panel. WM210-DSP adopts a customized Class D Amplifier together with switch mode power technology. which ensures the system for high efficiency, and exquisite and compact outlook. advanced cooling effect and high quality.
3. Molded large heatsink improves the cooling efficiency, with the result in higher reliability of the system.
4. Front-loaded cabinet design lowers the limit of low frequency. The cabinet is very small and compact but can reach very high SPL.

• WM210-DSP standby function:

WM210-DSP is equipped with an automatic standby function that saves power when not in use. If the WM210-DSP input terminal does not have an audio signal for 15 minutes (or the volume is minimal), the device will be in standby mode, and the indicator light in front of the speaker will change from blue (working) to red (standby). When the device is in standby mode. if an audio signal appears, the indicator light in front of the speaker will change from red (standby mode) to blue (working mode). When the amplifier is in standby mode. a small amount of current continues to flow in order to awaken the amplifier. It takes about 2 seconds to go from standby to full operation without any sound.

WM210-DSP Back Panel Control and Function

1. POWER Indicator
   When the speaker is connected to power, the LED is on.

2. SIGNAL Indicator
   When the input signal is detected, the LED will turn on.

3. LIMITER Indicator
   The LED will turn on when the output limiter is activated. If the output of the amplifier exceeds the maximum value, the output limiter will be activated, thus damping the output signal.

4. PROTECT /STANDBY Indicator
   If there is something wrong with the speaker, the LED will turn on automatically. If the speaker enters into standby mode, the LED will also turn on.(working mode: blue light; Standby: red light)

5. INPUTS socket (LINE A/MIC)
   Balance the XLR and PHONE type multi-purpose input pin. (LINE A/MIC

6. OUTPUTS socket (LINE A/MIC)
   Balance the XLR and PHONE type multi-purpose output pin. (LINE A/MIC)

7. USB port
   The port is used for DSP debugging (not open to users).

8. Preset switch
   There are 3 presets (Flat, Vocal, Drum) available for WM210-DSP, users can choose the preset according to their needs via the switch on the back panel.

9. MASTER VOLUME control knob
   MASTER VOLUME knob controls the gain input signal of all the channels. This control can adjust the sensitivity, so as to control the amount of semaphore sent to the power amplifier and then to the speakers.

10. Power switch
    Turn the power ON or OFF, pull the switch up to position ( I ) to turn ON the power, and pull the switch down to position ( 0 ) to turn OFF the power.

11. Power connection
    WM210-DSP has a loop-through power connection system. With four cable extensions and one AC power cord, you can power up 5 pcs WM210-DSP speakers maximum with one single 16 amp/120V (8amp/240V) power supply. The loop-through connection is coded by color (blue=AC INPUT, white =AC LINK) and it has different buckles to ensure proper connection.

Warning! : The switch on the speaker won’t disconnect the AC on the extension cables. If the AC power is connected to one speaker, all speakers that are linked by the cable extensions will be connected.

1. Make sure all AC power switches are off.

2. Make sure the AC power cord is not connected. AC power is the last power connection in this sequence.
   Warning!: With four pcs powerCON extensions and one pcs AC power cord, you can power up 5 pcs WM210-DSP speakers maximum with one single 16 amp/120V (8amp/240V) power supply. If you are using the power cable, make sure all the cables are connected well before connecting to the main power supply.

3.  Make sure the white powerCON connector is connected well with the AC LINK port on the speaker.

4. Turn the powerCON connector clockwise until it locks well.

5. Make sure the blue powerCON cable is connected well with the AC INPUT port on the speaker.

6. Turn the powerCON connector clockwise until it locks well.

7. Repeat the above step until all the speakers are properly connected (Please follow up on the suggestions of the maximum number of speakers you can connect).

8. Completely insert the blue powerCON connector on the AC power cord into the blue AC INPUT connector on the first amplifier in the signal chain.

9. Turn the powerCON cable connector clockwise until it locks into place.

10. Plug the other end of the power cord into the appropriate AC power supply.

11. Now you can turn on the AC power switch using the power-on procedure in this document.

Power-on sequence

1. Turn the input level of the mixer (or another source) that inputs the speakers to the lowest value.
2. Turn on all audio equipment (CD player, mixer, instrument).
   NOTE: WM210-DSP has a universal power supply that supports system operation with AC input voltage from 100-130VAC(60Hz), and 220-240VAC(50/60Hz). Please only use the correct power cable which supports the above voltage input.

Product Application Sample of WM210-DSP

• The waveguide of WM210-DSP provides a perfect coverage angle of 60°
  （20°Up-40°Down) x 60°， which can achieve symmetrical sound field coverage of large and medium-sized shows and live bands, WM210-DSP can fulfill the requirements of artists with excellent performance and high audio reproduction. The vertical adjustable angle is from 30°to 45°（30°，35°，40°，45°every 5°adjustable）

• The vertical angle of the horn of the WM210-DSP is divided into short and long throws. The upper angle of 20 degrees is for the near-field sound reinforcement (monitor for bands). The lower angle of 40 degrees is for long throw sound reinforcement (stage monitor)

Dimension of WM210-DSP

WM210-DSP Specification

AMPLIFIER

Amplifier| Class D
Power(Peak)| 1600W
Frequency Response (1W 80 2ch)| 20Hz-20KHz(±0.5dB)
Intermodulation Distortion (20Hz-20KHz, half power)| <0.05°4
Total Harmonic Distortion (201-1z-20KHz, Rated power 80)| <0.05%
Cooling| Cooling with fans, air convection
Protection| DC protection| 0.
Short circuit protection| 0.
Overheat| protection
Output overload protection| .si
Soft startup| protection
Overvoltage protection| 4
Undervoltage protection| 4
CABINET|
---|---
Cabinet| CNC made of Russian birch plywood
Optional Accessories| Flightcase / Cover bag
Dimensions(WxHxD)| 620x338x465mm
Net Weight| 33.0Kg
Technical Support and After-sales Service| Global application support team

AUDIO CENTER Reserves the right to change specifications without prior notice in the case.

Trouble Shooting

correctly
No sound| The cable is not connected correctly.
Or too small gain.| Connect with the input socket correctly.
Adjust speaker output gain input bigger.
Feedback in the sound| The microphone is toward to speaker
The sound is too high.| The speaker should be far away from the microphone sound pickup area to reduce the output gain, making the microphone closer to the sound source
Sound Discrepancy from different speakers.| Different gains for different speakers| Put the same gain for different speakers.
Sound distortion| Input volume is too big Output volume too big| Reduce the input volume of the equipment
Reduce the output gain of the speakers, make the Limiter LED lighted a bit
If the sound still distorted while the volume is set to a minimum, make the MIC/LINE switch to be LINE.

• Please consult the distributor if there are still problems

Dynamic Audio Solutions
http://www.audiocenter.net
E-mail:lnfo@ac-pro.net

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>