TOSHIBA TSR75-11 RO Tabletop Water Purifier Instruction Manual

TOSHIBA TSR75-11 RO Tabletop Water Purifier

Product Information

• Model : TWP-TSR75SHK(W) TWP-TSR75SHK(M)
• Product : RO Tabletop Water Purifier

This product is a tabletop water purifier that uses reverse osmosis technology to provide clean and purified drinking water.

Product Usage Instructions

1. Read the manual carefully before operating the water purifier.
2. Ensure that the water purifier is placed on a stable surface and the power cord is accessible.
3. Do not fill undrinkable water into the tank of the water purifier.
4. Before switching on the water purifier, make sure there is no possibility of frozen water in the heater.
5. Connect the power cord to a reliably grounded device.
6. This product is suitable for use in areas below 1500 meters above sea level.
7. Do not remove the water tank or unplug the power cord while the water purifier is in operation.
8. Avoid supplying power to the water purifier through an external switching device or circuit that is regularly switched on and off.
9. Inspect and maintain the water purifier regularly to ensure proper functioning.
10. Do not operate the UV-C emitter when it is removed from the appliance enclosure.
11. The UV-C emitter contained in this appliance can emit dangerous radiation that can harm the eyes and skin. Do not use the appliance in a way that may cause unintended exposure to UV-C radiation.
12. Do not operate the appliance if it is visibly damaged.
13. Do not attempt to replace the UV-C emitter individually. Contact a qualified service person for any maintenance or replacement needs.
14. Disconnect the appliance from the power supply before carrying out any maintenance.
15. Ensure that the appliance is supplied through a residual current device (RCD) with a rated residual operating current not exceeding 30 mA.

Please refer to the instruction manual and quick start guide provided in the packing box for detailed information on product setup, operation, and troubleshooting.

Safety Instruction

Safety instructions
All instructions described should be carefully read and followed.

• These instructions are precautions to prevent the risks of serious injury or death of the user, and any damages to propertv.

WARNING| WARNING indicates high possibility of serious injury (1) or death of the user.
& CAUTION| CAUTION indicates high possibility of injury (2) or property loss (*3).

1. Serious injury – injury which requires hospitalization, lengthy treatment, or blindness, hot and cold skin burn, electric shock, broken bones or poisoning.
2. Injury – injury, skin burn or electric shock which does not require hospitalization or lengthy treatment.
3. Property loss – extended loss of houses, furniture, domestic animals or pets.

**PROHIBITED!| (S) PROHIBITED! Indicates prohibited actions.**

Detailed instructions would be indicated on the inside of the circle or around the symbol in figures or in writing.

    IMPORTANT| e IMPORTANT Indicates mandatory actions.

Detailed instructions would be indicated on the inside of the circle or around the symbol in figures or in writing.

CAUTION| Recommends to take precautions.

Detailed instructions would be indicated on the inside of the triangle or around the symbol in figures or in writing.

To use

Instruction

| Prior to use, the water purifier must be properly assembled and installed in accordance with this manual.

It may damage to the water purifier and cause danger.

---|---

Away from

flammable materials

| Do not use the water purifier near a material with high volatility which is easily ignited or exploded.

It will cause explosion or fire.

| ****

Prohbt

| **** Do not use an extension cord with the water purifier. It may cause electric shock or fire due to heat.

Electric shock

| Do not use damaged power lines, power plug or loose power socket.

It may cause electric shock, fault, fire or injuries.

Instruction

| Make the water purifier on a solid level surface.

It may cause the water purifier to fall and tumble down.

**Pro hi b i t**

| Do not immerse cord, plug, or any other part of the water purifier in water or other liquids.

It may cause electric shock or Ii re.

---|---

Aw a y fro m chi ldr e n

| Do not operate the water purifier by weak people (including children) which are reduced physical, sensory, mental capabilities, nor inadequate experience and knowledge, unless sufficient instructions have been given by the person who can guarantee the safe use of the water purifier.

It may cause electric shock, damage, or malfunction.

Away from c h ild r en

| Children should be supervised to ensure that they do not play with the water purifier.

It may cause electric shock, damage, or malfunction.

| Use outlet with rated voltage AC 220-240V, and don’t use multiple outlets. It may cause a fire or an electric shock.

No dis – assemb l y and repai r w i t h o u t perm i ss ion

| Do not damage power line.
Do not damage, cut, process power line or bend, pull, twist or bind power line. Besides, do not yank the power line violently, or put weights on the line or clamp the power line.The power line may be damaged and cause fire or electric shock if the power line is damaged, the damaged line must be replaced by the manufacturer or its service agent or personnel having similar qualification, so as to prevent dangers.

I nsert p lu g

| Insert the power plug securely to the base and let the cord go downward.

If the cord goes upward or if the plug is incompletely inserted, it may cause fire due to electric leakage or heat generation.

Wipe o ff d u st

| Wipe off dust or dirt accumulated on the plug of power line.
The accumulated dust or dirt may cause fire, electric shock, or short circuit.

**No modification**

| Do not disassemble, remodel, modify and repair the water purifier. This may cause fire, electric shock or fault, and cause injuries. If repair is required, please contact with the vendor of the water purifier.
| Do not place anything on the water purifier. It may cause fire, electric shock or injuries.

Care fo r clean in g

| To clean the water purifier, use the soft cloth moisten by the neutral detergent diluted with water. Do not use the insecticide, Thinner, Benzine, chlorine or acid lotion.

It may cause crack, electric shock, fire, or deleterious gas.

**No freeze**

| Do not freeze. It may cause leakage or other malfunctions. Reverse osmosis membrane filters will be damaged below 0°C.
| Do not fill undrinkable water to the tank of water purifier.
This water purifier is exclusively for the tap water with known ingredient.
It may damage health or cause trouble.
| Do not switch on if there is a possibility that the water in the heater is frozen.
---|---
****| Power connections must be made with reliably grounded devices.

prohibit

| Unintended use of the appliance or damage to the housing may result in the escape of dangerous UV-C radiation. UV-C radiation may, even in little doses, cause harm to the eyes and skin.
---|---
**prohibit| ** Appliances that are obviously damaged must not be operated.

**instruction**

| The user is not allowed to replace the UV-C emitter individually.
**prohibit| ** Disconnect the appliance from the supply before carrying out maintenance.

instruction

| The appliance is to be supplied through a residual current device (RCD) that rated residual operating current does not exceed 30 mA.

Packing list

Product Introduction

Name of parts

Control panel

Button instructions 6 Water temp options

• 93°-99° Boiled water
• 80°-85° Green tea
• 58°-62° Honey water
• 53°-57° Warm water
• 46°-50° Formula milk
• Ambient water

Water shortage

• If the raw water tank is lack of water, the indicator keeps on;
• If the purified water tank is lack of water, the indicator flashes, and water cannot be discharged at this time.

Standby and wake up

• The whole machine enters the standby state and screen is off if it is not operated for 3 mins;
• In standby state, the machine can be waked up by pressing any key.

200ml Quantitative state

• Click the Quantitative button, it turns on, the machine enters the quantitative water output mode, and quantitative output is 200mL;
• Click the Quantitative button, it turns off, the quantitative mode is cancelled.

Replace the filter
With the use of the filter, the three small grids for reminding the filter life will turn off one by one. When the filter life expires, the three grids will flash synchronously to remind the user to replace the filter;
After replacing the filter, hold the Filter reset button for 3 seconds to reset the filter life.

Water treatment process diagram

Electric schematic diagram

How to use Notes
The installation shall be conducted by professional in local sell on commission and service site. First use instruction

1. Open the package, place it on the level table, and install the water tray.
2. Steps of taking out the water tank
   • Remove the water tank cover;
   • Lift the handle of the water tank and pull the water tank out, and then lift it out after it is disconnected from the base.
3. Fill Water
   • Add tap water to the raw water tank (the larger one).

Install the water tank

• Align the water tank with the socket on the base and press it down;
• After the water tank is pressed tightly, push the water tank to the side of the machine body;
• Install the water tank cover, at this time, the top of the water tank cover is flush with the top of the machine body.

Start to produce water
During the water production process, if the “Water Shortage” indicator is on, please pour out the remaining water in the water tank, fill the raw water tank with tap water, and repeat the above steps.

1. After the completion of water preparation, the internal pipeline is cleaned by emptying the internal water tank.
   • Internal emptying: In the standby state, hold the ” Ambient Water ” and ” Formula Milk ” buttons at the same time for 3 seconds to enter the drainage mode; At this time, the Ambient water icon flashes, and other icons keep on. Press the Ambient water button or wait for 3 minutes after draining out water, it will automatically exit the drainage mode. When used for the first time, it is necessary to fill the raw water tank to clean the water purifier, repeated operation 3-5 times.
2. When first use the machine, after filling water in raw water tank, water purifier will repeat the above procedures until the purified water tank is full. That is normal. If there is fully filled purified water tank, machine will enter the standby state.
3. Take water
   • Click any icon to light up the screen, the screen activation time is 3 mins.

Ambient water
After the screen is on, the temperature is automatically selected as Ambient water, click the Water Outlet button to discharge the water.

Other options
Select the corresponding temperature, and press the Water Outlet button to take water.c

Troubleshooting

Notes
The following is the judgment and inspection of common abnormalities. If simple treatment cannot be eliminated, please send it to the maintenance office for consultation. Please do not disassemble and repair yourself to avoid danger or damage to the water purifier.

• The pump may make slight noise when it operates in the purifying and filtering of the water purifier. You can use it normally.
• If there is any problem in using, please solve as the following methods. For the fault that can not be solved, please contact the local sell service center.

requirements of 220-240V±15%.
Failure to heat normally| Please check whether the water tank is installed in place and whether there is water in the raw water tank.
Please check that the filter is installed in place and the filter cover is in the correct position.
Please check whether the water tank and the water inlet connected to the water tank are blocked by foreign objects.
Please check if the filter life is expired.
The machine does not stop water production for a long time| Please check if the filter life is expired.
Water leakage| Please check whether the water tank is installed in place.
Please check that the filter is installed in place and the filter cover is in the correct position.
Replace the filter.
Odor| To ensure cleanliness, please clean the machine regularly. When it is not in use for a long time, please pour out the water in the water tank, and hold the “Ambient Water” and “Formula Milk” buttons for 3 seconds to drain all the water in the purified water tank.
The screen does not turn on and the machine cannot be operated| Please unplug the power plug and power on again.

Filter Introduction

Filter introduction

Filter name| Quantity| Filter form| Suggested service life| **** Function
---|---|---|---|---

Integrated multiple filter(FIST)

| ****

1

| PAC layer| ****

12-24 months

| Effectively filter mud, sand, rust, suspended solid and other large-grained substance and organic and residual chlorine.
**** RO membrane layer| The theoretical filtering precision of RO membrane filter element is up to 0.0001-0.001 micron. RO membrane filter intercept organics (trichloromethane and carbon tetrachloride ), heavy metal (arsenic, lead and cadmium etc.) in water.
Carbon block layer| Effectively filter organics (trichloromethane and carbon tetrachloride), remaining chlorine, odour and peculiar smell etc. in water.

Special Prompt

• The lifespan of filter element is not quality guarantee time, but the ideal lifespan of filter with the raw water in accordance with the national standard of domestic drinking water and based on the normal water using of a common family.
• The maintenance period of filter is expected time, but the real lifespan is depend on area, the quality of water, the quantity of water using and season(it is subjected to the suggestions of local sell on commission and service site). Only change filter timely, you can drink clear water.

Filter change

Notes
The filter can be replaced by yourself or contact with Toshiba service.
A small amount of residual water may flow out during the process of replacing filter, which is normal.

Filter model：FIST.

1. When all of the three grids of the filter life flash, please contact with Toshiba service for purchasing new filter.
2. The power must be cut off before replacing the filter.
3. As shown below
4. Follow the steps shown below to replace the filter.
5. After replacing the filter, hold the Filter Reset button for 3 seconds to reset the filter life.

Technical Parameters

Basic parameter

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>