VISUAL COMFORT 4458306 Two Light Table Lamp Instruction Manual
- June 13, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT 4458306 Two Light Table Lamp
STEPS TO ASSEMBLE THE LAMPSHADE
-
Take out the lampshade and 2 wrought iron frames
-
unfold the fabric lampshade
-
Mount the harp and in stal l the bulb (Not included)
-
Tighten the finial to secure the lampshade
Warning: If any special control devices are used with this fi xture,
follow the instructions carefully to assure full compliance with N.E.C.
requirements. If there are any questions, contact a qualified electric
contractor.
Warning : California Residents Proposition 65 This product contains lead,
a chemical known to the state of California to cause cancer and birth defects
or other reproductive harm. Do not place the product in your mouth. Wa sh your
hands after handling this product.
Caution: It is highly recommended to get an electrician to install this
light. Please make sure to turn the electricity off at the main circuit
breaker before beginning installation. All glass is fragile. Use care when
handling glass component(s) and/or lamp(s).
OVERVIEW
- Unpack all parts from cartons carefully.
- Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
- Tighten the lamp socket(B)into the body (A)until tight.
- Place the harp(C)onto the lamp socket(B).
- Place the shade(D)onto the harp(C).
- Tighten the finial(E)into the harp(C)until tight.
WIRE CONNECTION DIAGRAM
Wires meeting safety standards are required to connect the electical circuit
CAUTION: Risk offire
Please read all instructions carefully. Before you proceed to install ,make
sure that the power supply is turned off and remains off until installation is
completed .
PARTS INCLUDED
| Code | Part desc ription | QTY |
|---|---|---|
| A | Body | 1 |
| B | Lamp socket | 1 |
| C | Harp | 1 |
| D | Shade | 1 |
| E | Finial | 1 |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>