PYLE PLE550BS Equalizers Crossovers Sound and Recording User Manual

: June 4, 2024
: Pyle

Table of Contents

PYLE PLE550BS Equalizers Crossovers Sound and Recording
BEFORE USE
PLE550BS CONTROLS & FUNCTIONS
PLE550BS WIRING DIAGRAM
PLE770BS CONTROLS & FUNCTIONS
PLE550BS
What’s in the box:
Technical Specs:
PLE770BS
What’s in the box:
Technical Specs:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PYLE PLE550BS Equalizers Crossovers Sound and Recording

PYLE-PLE550BS-Equalizers-Crossovers-Sound-and-Recording-
product

Please take a few minutes to read the instruction manual and operating instructions. This will tell you how to use the receiver system. Here, you will nd unit features and operation instructions to ensure trouble-free use and installation. Please retain these operating instructions for future reference.

WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DON’T EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION!

BEFORE USE

Ensure that the power line voltage is AC 110V/220V
If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
Protect the Power Cord
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Do not block any ventilation openings
Blocking up the vents will make the temperature in the unit become higher and will damage the unit.
Avoid water dust and moisture
Do not place objects filled with liquids, such as vases, on the unit.
Do not place in low temperature
Ensure the ambient temperature is greater than 41ºF.
Install this sound system in a well-ventilated, cool, dry, clean place.
Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light).
Avoid tiny metals to fall inside the unit
To prevent short circuits avoid tiny metals
(ex. pins, coins, needle) to fall inside the unit.
DO NOT OPEN THE UNIT
as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the unit, contact your dealer or service company.
Avoid cleaning with a volatile solution
Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry or slightly damp cloth.

PLE550BS CONTROLS & FUNCTIONS

5 Bands Graphic Equalizer with SUB Volume Adjustable for Subwoofer Channel PYLE-PLE550BS-Equalizers-Crossovers-Sound-and-Recording-
fig-4

FADER CONTROL
This control adjusts the volume between the front and rear speakers in 4 speaker system.
VOLUME CONTROL
This control adjusts the output level.
SUBWOOFER VOLUME
This control adjusts the output level of the subwoofer.
SUBWOOFER FREQ
This switch selects a subwoofer frequency 43 or 63Hz.
INPUT SELECTOR SWITCH
This switch selects the BT input or CD input.
PREAMP CONTROLS
Control the frequency response of the Booster or cut, with the five-tone controls each 45Hz, 100Hz, 700Hz, 2KHz, and 15KHz.

PLE550BS WIRING DIAGRAM

PYLE-PLE550BS-Equalizers-Crossovers-Sound-and-
Recording-fig-5

PLE770BS CONTROLS & FUNCTIONS

5 Bands Graphic Equalizer with SUB Volume Adjustable for Subwoofer Channel PYLE-PLE550BS-Equalizers-Crossovers-Sound-and-Recording-
fig-6

FADER CONTROL
This control adjusts the volume between the front and rear speakers in 4 speaker system.
VOLUME CONTROL
This control adjusts the output level.
SUBWOOFER VOLUME
This control adjusts the output level of the subwoofer.
SUBWOOFER FREQ
This switch selects a subwoofer frequency 43 or 63Hz.
INPUT SELECTOR SWITCH
This switch selects the BT input or CD input.
PREAMP CONTROLS
Control the frequency response of the Booster or cut, with the five-tone, controls each 63Hz,125Hz, 315Hz, 750Hz, 2.2KHz, 6KHz, and 12KHz.