connect IT CMH-2010-BK Wall Mount For Flat Screen User Manual
- June 13, 2024
- CONNECT IT
Table of Contents
connect IT CMH-2010-BK Wall Mount For Flat Screen
Product Information
The CMH-2010-BK is a wall mount designed for flat-screen TVs. It is suitable for indoor use only and is intended for securing the weight of the mount, the screen, and other accessories. The mount should be installed on a wall or surface that has sufficient strength and maximum load capacity to support the weight.
Package Contents
- Wall plate
- M4x12MM screws (4pcs)
- M5x12MM screws (4pcs)
- VESA plate for TV installation (2pcs)
- Cable management accessories
The stability and safety of the mount should be checked at least every three months.
Product Usage Instructions
- Before using the product, read the user manual carefully.
- Ensure you have all the necessary components from the package contents.
- Choose a suitable wall or surface with sufficient strength and maximum load capacity.
- If installing on a concrete or brick wall, use the provided screws and follow the instructions for concrete/brick wall installation.
- If installing on a wooden wall, use a stud finder to locate the studs and follow the instructions for wooden wall installation.
- For TV installation, use the VESA plate provided and follow the instructions for VESA plate installation.
- Ensure you have assistance from another person when installing the screen.
- Tighten the screws properly during installation, but be careful not to strip the threads.
- After installation, check the stability and safety of the mount regularly, at least every three months.
- For cable management, use the provided accessories to organize and secure the cables.
Note: The original packaging, invoice, and warranty certificate should be kept for reference during the warranty period. Outdoor use of the mount is not recommended as it may cause harm or damage to the mount and the installed screen.
INSTRUCTION
- Before putting this product into operation, please read carefully all the instructions, even if you are already familiar with using similar products. Use the product only as described in this manual. Keep this manual in case you need it for future reference.
- The electronic version of this user manual can be downloaded on the website www.connectit-europe.com.
- We recommend keeping the original packaging of the product, invoice, and warranty certificate at least for the time the warranty is valid.
- When shipping the product, we recommend using the original packaging that the product was delivered in that will provide the best protection for it from being damaged during transport.
Warning
- The wall or the surface used for securing the mount must have sufficient strength and maximum load to secure the weight of the mount, the screen and other accessories.
- When installing the screen, use an assistance of another person.
- During the installation, tighten the screws properly, but make sure not to strip the threads. That could damage the installed screen or significantly decrease the maximum load of the mount.
- This wall mount is designed for indoor use only. Outdoor use may cause harm, damage to the mount or the installed screen.
- Check the stability and safety of the mount at least every three months.
Specifications
- color: black
- quick and easy assembly
- screws and concrete anchors included
- full-motion wall mount
- fits most 13“-27‘‘ flat panels
- VESA 75×75, 100×100 mm compliant
- swivel 180º
- extend from: 51-381 mm
- max. load capacity: 15 kg
Package contents
Assembly
CONTACT
- MANUFACTURER
- HERSTELLER
- PRODUCENT
- IT TRADE, a.s.
- 101 00 Praha 10
- Czech Republic
- tel.: +420 734 777 444
- service@connectit-europe.com.
- www.connectit-europe.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>