Connect IT CMF-7020-SL Spider Arm Basic User Manual
- June 13, 2024
- CONNECT IT
Table of Contents
Connect IT CMF-7020-SL Spider Arm Basic
Before putting this product into operation, please read carefully all the
instructions, even if you are already familiar with using similar products.
Use the product only as described in this manual. Keep this manual in case you
need it for future reference. The electronic version of this user manual can
be downloaded on the website www.connectit-europe.com.
We recommend keeping the original packaging of the product, invoice and
warranty certifi cate at least for the time the warranty is valid. When
shipping the product, we recommend using the original packaging that the
product was delivered in that will provide the best protection for it from
being damaged during transport.
Product Information
The CMF-7020-SL is a projector mount designed for ceiling installation. It is compatible with various projectors and provides a secure and adjustable mounting solution.
Specifications
- Model: CMF-7020-SL
- Compatibility: Compatible with most projectors
- Installation: Ceiling mount
Package Contents
- 1 x Projector mount
- Mounting hardware
Product Usage Instructions
- Before using the product, carefully read the user manual.
- Ensure you have all the necessary components from the package contents.
- Identify a suitable location on the ceiling for mounting the projector.
- Use the provided mounting hardware to attach the projector mount securely to the ceiling.
- Adjust the projector mount to the desired position and angle.
- Attach the projector to the mount using the appropriate mounting brackets or screws.
- Make sure the projector is securely attached and aligned properly.
- Connect the necessary cables to the projector for power and signal.
- Test the projector to ensure proper functionality and image projection.
Note: For detailed assembly instructions and additional information, refer to the user manual provided with the product or download the electronic version from the website www.connectit-europe.com.
It is recommended to keep the original packaging, invoice, and warranty certificate for future reference and in case of warranty claims. When shipping the product, use the original packaging to ensure its protection during transport.
Warning
- The wall or the surface used for securing the mount must have sufficient strength and maximum load to secure the weight of the mount, the projector and other accessories.
- When installing the projector, use the assistance of another person.
- During the installation, tighten the screws properly, but make sure not to strip the threads.
- That could damage the installed projector or significantly decrease the maximum load of the mount.
- This wall mount is designed for indoor use only.
- Outdoor use may cause harm, or damage to the mount or the installed projector.
- Check the stability and safety of the mount at least every three months.
Specifications
Package contents
Assembly
MANUFACTURER
IT TRADE, a.s. Brtnická 1486/2 101 00 Praha 10 Czech Republic
tel.: +420 734 777 444
service@connectit-europe.com
www.connectit-europe.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>