Dongguan Lianyou Intelligent Technology LY1668 Smart Curtain Robot Instruction Manual

Dongguan Lianyou Intelligent Technology LY1668 Smart Curtain Robot

Product Information

• Product Name: Smart curtain robot
• Model Name: LY-1668
• Connection: Bluetooth
• Operating temperature: -10°C to 50°C
• Working humidity: 0-95% RH, no condensation
• FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• RF Exposure: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Product Usage Instructions

1. Ensure that the operating temperature is within the range of -10°C to 50°C.
2. Make sure the working humidity is between 0-95% RH and there is no condensation.
3. Establish a Bluetooth connection between your smartphone or tablet and the smart curtain robot.
4. Follow the instructions provided in the accompanying mobile app to control the curtain robot.
5. Avoid making any changes or modifications to the equipment that are not expressly approved by the responsible party for compliance, as it may void your authority to operate the device.
6. Ensure that the device is not causing any harmful interference and accepts any interference received.
7. Use the device in portable exposure conditions without any restrictions.

Parts List

APP Connection Method

*Download the “Smart Life app, register and log in**

1. Click “add device”
2. Click “automatic discovery”, then click “start searching”
3. Found smart curtain robot, click “next”
4. Waiting for connection.
5. Click done

Multi-function Settings

1. Control interface: you can control the full open/half open/close of the curtain, click • in the upper right corner to enter the setting interface
2. Setting interface: set the temperature/light intensity to close, set the timing switch, the curtain robot needs to learn again if clicked to restore the initial state
3. Light intensity setting interface: Set the light intensity to close as needed
4. Temperature setting interface: set the temperature to close as needed
5. Timing setting interface: set the timing switch as needed

Warm reminder:

1. The dual-open smart curtain robot is controlled by linkage, you only need to add a curtain robot after booting.

2. Do not untie the double-open smart curtain robot. After unbinding, one curtain machine will not move and the machine will not be linked.
   Manipulation

3. If you accidentally unbind, click on the settings to restore the initial state and return to the learning interface. After clicking on the binding, a set of codes will appear (do not change), just click on the binding to automatically jump to the learning interface, and you can learn again

Note: Double-click to enter the pairing mode after booting

Learning Method

1. Click above smart curtain robot
2. The initial installation position of the curtain robot is the curtain’s close state, click “start learning”.
3. Click “stop learning” after the curtain is fully opened.
4. Click “OK” after completing the learning.

Product Name: Smart curtain robot
Model Name: LY-1668
Connection: Bluetooth
Operating temperature: -10°C -50°C
Working humidity: 0-95% RH, no condensation
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
The devices has been evaluated to meet general RF exposure requirement the device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>