boAt Rockerz 333 User Manual

Rockerz 333

User Manual

Rockerz 333 comes with the boAt Signature Sound and 30 HRS of non-stop playback. You can seamlessly pair two devices at the same time with the dual pairing Bluetooth v5.0.

Walkthrough Video

Specifications

Troubleshooting FAQs

Charging

How to charge Rockerz 333?
To charge the earphone, plug one end of the USB type-C cable with the case and connect the other end to a computer or wall adapter.

What to do if the earphones are not charging or if the battery life is low?

1. Check to see if the charging wire being used is working – check to use another charging wire or try using the wire on another device.
2. Check if the voltage of the charger is correct for the device, use only 5V 2A chargers.
3. Check if the charging is done till the red light turns completely blue.
4. Check if the battery was not tampered with or exposed to any electrical damage.
5. Check if the charging port is not clogged with dirt. If so, please clean it with a cotton swab.

Please check if the adapter and charging cable support fast charging.

​Poor Sound Quality

What to do if the sound is distorted/low volume/low bass/low quality?

1. Check if connected device does not have any equalizer settings applied.
2. Check if the device has issues even after moving it closer to the connected device and removing any obstructions.
3. Check if the distortion or quality lowers at all volumes or only at high volumes.
4. Check using different media players and different devices and if the distortion happens on all devices or only on specific ones.
5. Check to see if the earbuds have ear wax accumulated. If so, please clean it with cotton swab and alcohol, after doing so gently blow dry it from a distance.​

What to do if the volume of the earphone automatically changes?

1. Check if connected device does not have any equalizer settings applied.
2. Check using different media players and different devices and if the volume change happens on all devices or only on specific ones.

​Bluetooth Connectivity

How to pair Rockerz 333 with other media devices?

1. Press & hold the Power button to switch the speakers ON.
2. There will be a prompt as well as the rapid blinking of the mentioned LED indicator light.
3. Turn ON the Bluetooth function of your device and search for “Rockerz 333″ in the list of available devices.
4. Choose “Rockerz 333” from the list and if asked then enter the pairing password ‘0000’ to establish Bluetooth connectivity.
5. After successful pairing, the speaker is now ready to play music from your device.
   The speaker will automatically get connected to this device when switched ON if it is in range and the Bluetooth mode is ON.

What to do if the headphone is not connecting via Bluetooth?

1. Check to see if the device is in pairing mode – Hold the Multifunction button for 5 seconds until the red and blue LED light ON the device starts flashing alternately.
2. Check if the device is in the range of Bluetooth (usually 10m) and if there are any obstructions in between.
3. Check if it works after clearing the pairing list on the device, Press and hold the volume “+” button and the volume “-” button for about 5 seconds in standby mode to clear paired list of devices.
4. Check if the device being connected to supports Bluetooth connections.
5. Check if it is a passcode issue and if so enter ‘0000’ or ‘1234’.
6. Check to see if the device being connected to does not have any software issues – Check to forget the device on Bluetooth, update the mobile software.

What to do if the headphone is not able to dual pair?

1. Check to Pair the boAt Rockerz 333 to first phone as per usual pairing procedure, then switch it off. Then switch on the earphone again and enter pairing mode, enable Bluetooth function in second phone, find earphone’s Pairing Name “boAt Rockerz 333″ and pair to second phone per usual procedure. Switch off earphone one more time. Then simply switch ON earphone, without entering pairing mode (a short press until white light comes on). The earphone should automatically re-connect to the last connected phone (which is the second phone). Then find headset “boAt Rockerz 333″ in first phone’s Bluetooth setting, select this to pair to first phone. Both phones should now be paired to the earphone.
2. Check to try dual pairing with other devices to see if it works with them.

Dysfunctional Voice Assistant

What to do if the voice assistant does not wake up?

1. Check if the pairing device has the feature enabled. Google Assistant or Siri should be enabled to use this feature from your device.
2. Please follow the steps carefully, long press for 2 seconds and release, this should allow Google Assistant or Siri to pop up on the media screen of the device. Though under some circumstance, this featuremay or may not work on some devices which may be restricted by default.

Other Functional Issues

What to do if the earphones do not turn ON or if one side earcup is not working?

1. Check to see if the device has been properly charged first, till the red light turns blue.
2. Check if the voltage of the charger is correct for the device, use only 5V 2A Chargers.
3. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire.

What to do if the in-built controls of the device are not working?

1. Check if the controls do not work while connected to another device
2. Check to forget the device and re-pair it.
3. Check if the media player being used supports such controls.
4. Check if the controls do not function on call or other media players
5. Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire.

Microphone Functionality

Does Rockerz 333 have a dedicated microphone?
Yes, Rockerz 333 earphones has a dedicated mic perfect for calls and recording.

What to do if the microphone of the earphone is not working?

1. Check to see the microphone is not being blocked by any particles.
2. Check to see if the microphone is being held at the adequate distance for it to be able to pick up the voice.
3. Check if the microphone was not exposed to any hazards like direct sunlight or fire.
4. Check if the microphone was not exposed to water above the resistance or dipped in any liquid.

General FAQs

Technology

What is ASAP charge technology?
ASAP Charge is boAt’s very own patented technology. It lets your device charge at an incredible charging speed (may vary under some circumstance) where 10 mins of charging can give up to 10 hours of playback time. ​

Does Rockerz 333 support low latency?
Rockerz 333 does feature low latency for all the entertainment needs. While gaming is still subjective though because it all depends on the media device too. It is okay for casual gaming, but not professional gaming.

How to activate low latency?
This does not need any trigger for it to activate. Once connected with your device, the processors initiate internal run for low latency automatically.

Does the device have cVc?
Yes, it does. The Clear Voice Capture (CVC) technology is used for noise cancelling and enhancing selective listening. ​

​Device Controls

How to Power ON/OFF Rockerz 333?
Power ON: Press & hold the Multifunction button for 3 seconds
Power OFF: Press & hold the Multifunction button for 3 seconds.

How to adjust volume in Rockerz 333?
Short press the (+) button to increase volume.
Short press the (-) button to increase volume.

How to play/pause in Rockerz 333?
Press the multifunction button to play/pause music.

How to answer/end calls with Rockerz 333?

1. Short press the MFB button once, while the any incoming call has arrived. There will be a ‘tone’ and the call will get answered.
2. Short press the MFB button once the call is done. There will be a ‘tone’ and the call will get ended.

How to change tracks in Rockerz 333?
While playing music, press and hold volume (-) button for 2 seconds to move to the previous track.
While playing music, press and hold volume (+) button for 2 seconds to move to the next track.

How to reset (Clear Paired devices)?
Long press both the volume buttons for 5 seconds at the same time. The red and blue lights flash thrice simultaneously. This will clear all the paired devices history from the device. The blue LED stays solid for 2 seconds to indicate the same.

How to activate Voice Assistant in Rockerz 333?
Long press the multifunction button for 1.5 seconds to activate Voice Assistant. (Make sure your phone’s Voice Assistant is enabled before use).

Device Charging

How long does it take to charge? Does it support fast charging?
Rockerz 333 takes around 40 minutes to fully charge. It supports fast charging.

Does the device have wireless charging?
No. Rockerz 333 does not support wireless charging.

Can I charge my headphones with a mobile charger?
Yes, Rockerz 333 wireless headphones can be charged with a mobile charger.

Water/Dust Protection

Is it good for running and sports in general?
Yes, all Rockerz products come with IPX5 Splash and Sweat Resistance, making them perfect for sports and adventures.

Can I swim with the Rockerz 333 ?
Rockerz 333 earphones are IPX5 certified which means it can withstand up to low pressure water jet spray but it cannot withstand submerging it into the water. It is recommended not to use it during swimming sessions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>