Connect IT CMF-3107-BK Single Arm Premium User Manual
- June 13, 2024
- CONNECT IT
Table of Contents
Connect IT CMF-3107-BK Single Arm Premium
Product Information
The CMF-3107-BK is a monitor mount designed for indoor use. It is compatible with screens that have VESA mounting patterns of 75mm x 75mm, 100mm x 100mm, and 100mm x 200mm. The mount can support a maximum load of up to 10kg. The package contents include the monitor mount and an instruction manual.
Product Usage Instructions
- Before using the product, read the user manual carefully.
- Ensure that the wall or surface used for securing the mount has sufficient strength and maximum load to support the weight of the mount, screen, and other accessories.
- During installation, it is recommended to have assistance from another person.
- Tighten the screws properly during installation, but make sure not to strip the threads to avoid damaging the screen or decreasing the maximum load capacity of the mount.
- Do not use the mount outdoors as it may cause harm or damage to the mount and the installed screen.
- Check the stability and safety of the mount at least every three months.
For more detailed instructions, please refer to the user manual available for download on the website www.connectit-europe.com.
Before putting this product into operation, please read carefully all the
instructions, even if you are already familiar with using similar products.
Use the product only as described in this manual. Keep this manual in case you
need it for future reference.
The electronic version of this user manual can be downloaded on the website
www.connectit-europe.com.
We recommend keeping the original packaging of the product, invoice and
warranty certificate at least for the time the warranty is valid.
When shipping the product, we recommend using the original backpacking that
the product was delivered in that will provide the best protection for it from
being damaged during transport.
Warning
- The wall or the surface used for securing the mount must have sufficient strength and maximum load to secure the weight of the mount, the screen and other accessories.
- When installing the screen, use an assistance of another person.
- During the installation, tighten the screws properly, but make sure not to strip the threads. That could damage the installed screen or significantly decrease the maximum load of the mount.
- This wall mount is designed for indoor use only. Outdoor use may cause harm, damage to the mount or the installed screen.
- Check the stability and safety of the mount at least every three months.
Specifications
Package contents
Assembly
MANUFACTURER
HERSTELLER
PRODUCENT
IT TRADE, a.s.
Brtnická 1486/2
101 00 Praha 10 – Michle
Czech Republic
tel.: +420 734 777 444
service@connectit-europe.com
www.connectit-europe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>