connect IT CEP-7100-BK Sensor Touch Bluetooth Earbuds User Manual

connect IT CEP-7100-BK Sensor Touch Bluetooth Earbuds

THANK YOU

THANK YOU FOR BUYING A CONNECT IT PRODUCT.

Do you want to be the first to know about other news of CONNECT IT? Follow us on social media.

• Before putting this product into operation please read through the User’s Manual carefully, even if you are already familiar with the use of similar products. Use the product only as described in this User’s Manual.
• Keep this User’s Manual for future reference. It is an integral part of the product and may contain important instructions for commissioning this product, its operation and cleaning.
• Make sure that all other people handling this product are familiar with this Manual. If you hand the product over to other people, make sure that they read this User’s Manual, which shall be given to them together with the product.

We recommend keeping the original packaging of the product, proof of purchase and the warranty card, if supplied, at least for the warranty period. In case of transport, we recommend packing the product in the original packaging, in which it has been delivered in, as it protects it best against damage during transport. Scan this QR code to get the latest version of the User’s Manual. In your smartphone, open the QR code reader application and point the smartphone at this code – the page for downloading the latest version of the User’s Manual will open:

You can also find the latest version of the User’s Manual on our website www .connectit-europe.com
The text and technical specifications are subject to change.

Technical Specifications

• Bluetooth chip: 6936D4
• Bluetooth version: V5.0
• Bluetooth profiles:
  • A2DP (Advanced Audio Distribution Profile … stereo music transmission
  • AVRCP (Audio/Video Remote Control Profile) … music playback control
  • HSP (Headset Profile) .. phone calls transmission
  • HFP (Hands-Free Profile) … phone calls control
• Working frequency: 2.402-2.480 GHz
• Range: up to 10 m
• Frequency range: 20 Hz to 20 kHz
• Impedance: 16 Ohm ‡15%
• Earphone sensitivity: 98 ‡3 dB
• Earphones power consumption: 3 mW
• Microphone sensitivity: -40 ‡2 dB
• Battery – earphones: 3.7 V / 40 mAh (Li-lon)
• Battery – charging case: 3.7 V / 260 mAh (Li-lon)
• Operating time: up to 3 hours when using the earphones on their own (without the charging case)
• Number of earphone charges from the fully charged case: 2x
• Input parameters of the charging case: 5 V / 0.5-1 A
• Output parameters of the charging case: 5 V / 100 mA
• Earphone charging time: approx. 1.5 hours
• Case charging time: approx. 2.5 hours
• Earphone dimensions with M-size earpad on it (w × d × h): 27 × 21.5 × 15 mm
• Earphones weight (including M-size silicone earpads): 2 × 3.25 g
• Charging case dimensions (w × d × h): 60 × 40 × 25 mm
• Weight of the charging case without the earphones: 25.5 g
• Weight of the charging case with the earphones: 33 g

Packaging Contents

• Bluetooth earphones (1 pair)
• Charging case
• Silicone S, M, L-size earpads (3 pairs)
• USB-C charging cable
• User’s Manual

Description of Each Part

1. Magnetic protective lid of the charging case
2. Charging magnetic dock for an earphone
3. Charging pins
4. Battery status indicator (digital display)
5. Charging case
6. Charging contact pads
7. Silicone earpad
8. Microphone
9. LED indicator
10. Multifunction touch sensor
11. LED indicator
12. USB-C charging port

Charging the Charging Case Battery

• The battery of the charging case is charged by means of the supplied USB-C (type C) cable and a USB power adapter with an output of 5V / max. 1A (the power adapter is not included, but you can use, for example, a mobile phone adapter or the separately sold original CONNECT IT adapter of the CWC-2015 series).
• The charging case battery charging status can also be monitored on the display A 4
• The charging status is displayed as a percentage (100% means that the case is fully charged).

Smart detection function for switch-off

• The charging case is equipped with a smart detection function that determines when both earphones are fully charged.
• The internal circuit turns off after approx. 30 seconds to reduce the discharge of the charging case’s internal battery.

Note: The case can be charged with or without the earphones inside.

Operation and Charging of the Earphones

To charge the earphones, put them into the slots of the charging case; the slots are equipped with magnets to fix the earphones easily.

Automatic detection of the charging function

• As soon as an earphone is inserted in the charging case, the case detects it and starts charging it automatically.

Caution: The left earphone must be inserted in the left part and the right earphone in the right part of the charging case. Otherwise the fixing magnets are not correctly polarized and the earphones cannot be inserted properly.

Pairing with a phone

1. Open the charging case and take out both earphones. The earphones are switched on automatically and the pairing starts, which is indicated by the flashing of the LED indicator A 9 alternately in blue and red.
2. Under the Bluetooth section in your mobile, find the pairing name „CONNECT IT CEP-7100-BK” and have the devices paired.

Note: The support for the functions in this manual depends on the paired phone.

Notices

The use of the product limits your awareness of surrounding sounds. Therefore do not drive vehicles or operate any machines when using the product. Clean the product using a soft damp cloth that does not give up any fluff. Do not use any aggressive agents for cleaning.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS

Packaging materials and old appliances shall preferably be recycled. The packaging materials of this product can be disposed of as sorted waste. The same applies to plastic bags made of polyethylene (E) and other materials – please hand them over for recycling.

DISPOSAL OF WASTE ELECTRICAL & ELECTRONIC EQUIPMENT

In accordance with the European Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), this appliance is labeled with this symbol on the product or its packaging to indicate that this product shall not be treated as household waste. It must be disposed of at a collection site for recycling of waste electrical and electronic equipment. The proper disposal of this product helps to prevent adverse impacts on the environment and human health, which could otherwise result from improper waste disposal. The disposal shall be carried out in accordance with waste management regulations.

For more detailed information about the recycling of this product, contact the local authorities, household waste disposal services or the shop where you have bought the product. For proper disposal, renewal and recycling, hand the products over to the designated collection sites. Alternatively, in some EU or other European countries, you can return the products to your local dealer when buying an equivalent new product. The proper disposal of this product helps to preserve valuable natural resources and prevent potential adverse impacts on the environment and human health, which could result from improper waste disposal. For details, contact your local authorities or the nearest collection facility. In case of improper disposal of this type of waste, fines may be imposed in accordance with national legislation.

For business entities in the EU countries

• If you want to dispose of electrical and/or electronic equipment, please contact your dealer or supplier for the necessary information.

Disposal in other countries outside the European Union

This symbol is valid in the European Union. If you want to dispose of this product, contact your local authorities or your dealer for the necessary information about the proper way of disposal. In accordance with the law, we provide the take-back, processing and free environmentally friendly disposal of electrical and electronic equipment through the collective system of REMA System, a.s. The main purpose is to protect the environment by ensuring the efficient recycling of waste electrical and electronic equipment. For the current list of collection sites, see the web www.rema.cloud

This product meets all the basic requirements of the applicable EU directives. It is CE marked. This mark indicates the conformity of the product’s technical characteristics with the applicable technical regulations. The EU Declaration of Conformity is available at www.connectit-europe.com.

MANUFACTURER

• IT TRADE, a.s.
• Brtnická 1486/2 101 00 Praha 10 Czech Republic
• tel.: +420 734 777 444
• service@connectit-europe.com
• www.connectit-europe.com.

CONNECT IT® is a registered trademark

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>