GOAL ZERO PRO 4000 994 Wh LiFePO4 Expansion Battery Installation Guide
- June 13, 2024
- GOAL ZERO
Table of Contents
GOAL ZERO PRO 4000 994 Wh LiFePO4 Expansion Battery
Product Information
The mounting plate is a secure and stationary accessory designed for use with the Yeti PRO and Tank PRO 4000 units. It is suitable for both home and travel use. The mounting plate ensures that your units remain stable and in place.
To ensure safe and effective use of the mounting plate, please read all warnings, instructions, and cautions provided in the user manual. For the most up-to-date information and user guide, visit www.goalzero.com.
DISCLAIMER
Please read all warnings, instructions and cautions carefully before use to
avoid personal injury, property damage or damage to your Goal Zero product.
Goal Zero reserves the right to update this document without prior notice.
Please visit www.goalzero.com to find the latest
product information and the most recent version of the User Guide. The
mounting plate keeps your Yeti PRO and Tank PRO 4000 units secure and
stationary whether you set them up at home or take them on the road.
For assistance with your device in the United States, visit our contact page at www.goalzero.com/contact or call 1-888-794-6250. For assistance with your device outside of the United States, contact the local distributor. If you do not have contact information for the local distributor, contact us in the United States and we will help connect you to the local representative.
Required tools:
- Measuring Tape
- Marking Tool (Paint Pen, Marker, Pencil)
- Screwdriver or Power Drill & Drill Bit(s) (Dependent on where you are installing)
- Wrench set (May be necessary for some installations)
Required Hardware:
- Mounting Plate
- Bolts to secure the plate (4 minimum for home installation, 8 or more for RV installation)
Hardware Recommendations
Cement
We recommend using a 6mm or ¼” x 20 anchor bolt.
Wood or Metal
We recommend using a 6mm or ¼” x 20 toggle bolt with a washer.
- It is the responsibility of the installer to determine hardware quantity, length, and type to meet the needs of the specific mounting application.
- It is also the responsibility of the installer to ensure that proper tools, personal protective equipment, and safe practices are implemented to ensure the safety of the installer and the quality of the installation.
Installation
- Choose a spot for your Yeti PRO 4000 and mounting plate. If you plan to expand your system in the future with a second Yeti PRO 4000, leave enough space for an additional mounting plate next to the spot you choose.
- Mark mounting hole locations that will be drilled out to support the installation of hardware.
- Install the mounting plate in a direction that allows the latches to be opened and closed.
- Insert your bolts and tighten until secure. Use at least 4 bolts for home installations.
- Attach the Yeti PRO 4000 to the mounting plate and secure with the locking latch by inserting the key into the lock cylinder and turning the key clockwise, bringing the locking arm into the locked position. See illustration on page 6.
- If installing in an RV or van, be sure the unit is secure before transporting.
NOTE: If stacking multiple Units, the Yeti PRO 4000 should always be on
top. If you are stacking units in an RV, be certain the units are all latched
together.
Ensure that the mounting plate is spaced a minimum of 5” from any wall.
Ensure the mounting plate is spaced a minimum of 36” from any door or window
.
If you’re installing multiple stacks of Yeti PRO 4000 power stations and Tank
PRO 4000 expansion batteries, ensure that each stack is a minimum of 36”
apart.
IMPORTANT: Do not stack more than 5 units high. (1 Yeti PRO 4000 and up
to 4 Tank PRO 4000 units).
WARNING – Always utilize the Mounting Plate (SKU 96115) and ensure all
latches are tightly secured when stacking the Yeti PRO 4000 and Tank PRO 4000
units. Never stack more than 4 Tanks with one Yeti PRO 4000. Stacking products
without the mounting bracket can constitute a tipping hazard and lead to
injury. Stacking more products than recommended can lead to damage to the
products and an injury hazard. Never step or climb on any Goal Zero products
and never allow a child to step or climb on or around the products.
GOAL ZERO HEADQUARTERS
Draper, UT 84020
1-888-794-6250
Designed in the U.S.A.
Made in China
Goal Zero Yeti is a trademark of Goal Zero.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>