ASUS EBM68 Tri Band WiFi Router User Guide
- June 13, 2024
- Asus
Table of Contents
ASUS EBM68 Tri Band WiFi Router
Product Information
The product is the ASUS Expert WiFi EBM68, a tri-band WiFi router with AX7800
capability. It features a USB 3.2 Gen 1×1 port, a 2.5G / 1G WAN port, and
three LAN ports (LAN 1~3). The router also
includes a power switch and a power (DCIN) port. For more detailed information
about the product, please refer to the official website:
https://asus.click/ExpertWiFiEBM68
To set up the router, you can scan the provided code and download the ASUS
ExpertWiFi app. Alternatively, you can open a web browser and navigate to
http://expertwifi.net for web setup.
Product Usage Instructions
Installation:
The router should be installed and operated according to the provided
instructions. Ensure that the antenna(s) used for the transmitter are
installed to maintain a separation distance of at least 31 cm from all
persons. The antenna(s) should not be co-located or operating in conjunction
with any other antenna or transmitter.
Wall Mounting:
If you choose to wall mount the router, make sure to follow these
guidelines:
- Only install the wall mount vertically on the wall.
- DO NOT install the wall mount horizontally or on the ceiling.
- DO NOT mount the equipment higher than 2 meters.
Note that the provided wall anchor and screws sizes are for reference only. It is recommended to use appropriate types of anchor and screws based on the wall you intend to install on.
Recycling and Environmental Responsibility:
ASUS provides recycling and takeback programs to promote environmental
responsibility. For detailed recycling information in different regions, visit
http://csr.asus.com/english/Takeback.htm.
Compliance with Chemical Regulations:
The product complies with the REACH (Registration, Evaluation,
Authorization, and Restriction of Chemicals) regulatory framework. Detailed
information about the chemical substances used in ASUS
products can be found at http://csr.asus.com/english/REACH.htm.
FCC RF Caution Statement:
WARNING: Any changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
FCC RF Exposure information:
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. The exposure standard employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR limit set
by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating
positions accepted by the FCC with the EUT transmitting at the specified power
level in different channels. The FCC has granted an Equipment Authorization
for this device with all reported SAR levels evaluated as in compliance with
the FCC RF exposure guidelines. SAR information on this device is on file with
the FCC and can be found under the Display Grant section of
www.fcc.gov/oet/ea/fccid.
WARNING: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF exposure
compliance. To maintain compliance with FCC exposure compliance requirement,
please follow operation instruction as documented in this manual.
WARNING: This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 31 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter.
Compliance Statement of Innovation, Science and Economic Development
Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada
licence exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device. Operation in the band 5150–5250 MHz is only for
indoor use to reduce the potential for harmful interference to co-channel
mobile satellite systems. CAN ICES-003(B)/NMB-003(B)
Radio Frequency (RF) Exposure Information
The radiated output power of the ASUS Wireless Device is below the Innovation,
Science and Economic Development Canada radio frequency exposure limits. The
ASUS Wireless Device should be used in such a manner such that the potential
for human contact during normal operation is minimized. This equipment should
be installed and operated with a minimum distance of 30 cm between the
radiator any part of your body. This device has been certified for use in
Canada. Status of the listing in the Innovation, Science and Economic
Development Canada’s REL (Radio Equipment List) can be found at the following
web address: http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html
Additional Canadian information on RF exposure also can be found at the
following web: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
For product available in the US/Canada market, only channel 1~11 can be
operated. Selection of other channels is not possible.
This device is restricted for indoor use only.
Router Overview
- USB 3.
- Gen 1×1 port 2 2.5G / 1G WAN port
- LAN 1~3 ports
- Power switch
- Power (DCIN) port
- For detailed information, please refer to https://asus.click/ExpertWiFiEBM68
Reboot modem and ensure its connection is ready
Notice: Unplug modem for 10 sec then plug back in
Prepare
your ASUS router and power it on
Once the status light is solid blue then it’s ready for setup
Scan the
code and download ASUS ExpertWiFi app for setup
For more information, please scan the code on the cover
https://asus.click/asusexpertwifii
https://asus.click/asusexpertwifia
[Web] Open a web browser and navigate to http://expertwifi.net for web
setup.
Fixation
IMPORTANT
Only install the wall mount vertically on the wall. DO NOT install the wall
mount horizontally or on the ceiling. DO NOT mount this equipment higher than
2 meters.
NOTES:
Wall anchor and screws sizes are for reference only. It is recommended to use
appropriate types of anchor and screws based on the wall you intended to
install on.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions
for you to be able to responsibly recycle our products, batteries, other
components, as well as the packaging materials. Please go to
http://csr.asus.com/english/Takeback.htm for the detailed recycling
information in different regions.
REACH
Complying with the REACH (Registration, Evaluation, Authorization, and
Restriction of Chemicals) regulatory framework, we published the chemical
substances in our products at ASUS REACH website at
http://csr.asus.com/english/REACH.htm
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC regulations restrict the operation of this device to indoor use only. This
device cannot operate as a subordinate between separate buildings or
structures. This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
References
- Global Take Back Service | Resource Regeneration | Circular Economy | ASUS ESG website, ASUS ESG goal
- Radio equipment list (REL)
- ASUS Global
- ASUS ExpertWiFi - Apps on Google Play
- ASUS ExpertWiFi on the App Store