BEELINE velo 2 Cycling Navigation Device User Guide

June 4, 2024
BEELINE

BEELINE velo 2 Cycling Navigation Device

BEELINE velo 2 Cycling Navigation Device-fig1

Charging

Device buttons

Translations not final

Smartphone pairing

Pair your Velo 2 with your smartphone as prompted by the Beeline app. N.B. Do not pair in your smartphone’s Bluetooth settings menu.

Universal elastic strap

Warranty & returns

Garantie et retours

Garantie und Rücksendungen

All information on warranty and returns can be found at beeline.co/warranty

Each Beeline Velo 2 has a lithium polymer battery, which should only be recharged using the included USB cable. Attempting to remove the battery will void the warranty and may result in injury. Protect the environment by not disposing of this product with household waste. Check your local authority for recycling advice and facilities. Dispose of this product in accordance with local and national disposal regulations (if any), including those governing the recovery and recyling of waste electrical and electronic equipment

(WEEE Directive 2002/96/EC). Disposal, recycling, and other environmental information related to Beeline Velo 2 can be found online at beeline.co. Item number VELO_2.0 | Designed in London. Made in China. Regulatory information, certification and compliance marks specific to Beeline Velo 2 can be found on your device under Options > Legal & Regulatory.

FCC regulatory information

FCC ID: 2AKLEVELO2

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Industry Canada (IC) regulatory information

IC: 27984-VELO2

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Warning!

Use of Beeline products while driving still means that you need to drive with due care and attention. Your device is intended to serve as a driving aid and is not a substitute for driving with due care and attention. Always obey posted road signs and applicable laws. Distracted driving can be extremely dangerous. Please do not operate this device in any manner that diverts a driver’s attention from the road in an unsafe manner.

Battery safety information

  • Each Beeline Velo 2 has a lithium polymer battery, which should only be recharged using the included USB cable
  • Use of unauthorised cables, power adapters, or batteries can cause fire, explosion, or pose other risks
  • Use only authorised accessories that are compatible with your device
  • Attempting to remove the battery will void the warranty and may result in injury
  • Do not disassemble, hit, crush or burn the battery. If the battery appears deformed or damaged, stop using the device immediately.
  • Do not place the battery in a high temperature environment

Need more info?

Scan the QR code below for more detailed information and FAQs.

Thanks for joining the ride!

velo2 #beeline #ridebeeline

©2022 Beeline, all rights reserved Beeline, Li.211 The Print Rooms, 164-180 Union Street, London, UK

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

BEELINE User Manuals

Related Manuals