hPlay NP004A Portable CD Moombox with FM Radio Instruction Manual

hPlay NP004A Portable CD Moombox with FM Radio

LOCATION OF CONTROLS

1.  HANDLE
2.  VOLUME CONTROL KNOB
3.  CD DOOR
4.  SPEAKERS
5.  LCD SCREEN
6.  POWER ON/OFF BUTTON
7. /REP/RAND/PROG/M- BUTTON
8.  REWIND BUTTON
9.  FORWARD BUTTON
10.  HEADPHONE JACK
11.  AUX IN JACK
12.  USB PORT
13. /SCAN/M+ BUTTON
14.  MODE BUTTON
15.  FM ANTENNA
16.  AC SOCKET

OPERATION

AC Operation
Before operating the NPO04A, make sure that the voltage on the unit corresponds to the voltage of your local area. Unravel the AC Line Cord; insert one end into an AC socket on the unit and the other end into a standard AC outlet.

1.  In case of malfunction due to electrostatic discharge (ESD), reset the unit by reconnecting the AC cord again to resume to normal operation.
2.  When not in use, unplug the AC power cord from the AC power socket.

Battery Operation
Disconnect the AC Cord. Open the BATTERY compartment and insert 6 x “C” or UM2 batteries (not included) making sure that the battery polarity (+/-) is observed. Remove the batteries if the unit will not be used for a long period of time.
Basic Operation

1.  Press the POWER ON/OFF BUTTON to turn on/off the unit.
2.  Adjust the sound level by rotating the VOLUME CONTROL KNOB.

Listening to the radio

1.  Press the MODE BUTTON to select FM radio. “FM frequency, show on the LCD SCREEN.
2.  Press and hold the /SCAN/M+ BUTTON to search all the FM stations.
3.  When it stops searching the stations, all the FM stations have been found and stored. It can store 30 FM stations.
4.  Press the /SCAN/M+ BUTTON or ****/REP/RAND/ PROG/M- BUTTON to select the stations.
5.  To activate the manual search, press the REWIND BUTTON or FORWARD BUTTON to decrease or increase frequency by 0.1 MHZ.
6.  Fully extend and reorient the antenna to improve FM reception.

Playing a CD

1. Open the CD DOOR, place a CD disc into the CD compartment and close the CD DOOR.
2. Press the MODE BUTTON to select CD play mode. “CD” show on the LCD screen.It will start playback automatically.
3.  Control the CD playback using , and ****
4. Press and hold ****/REP/RAND/PROG/M- BUTTON to stop the CD playback. The total number of tracks show on the LCD SCREEN.

OPERATION

When in CD play mode, every time you press the ****/REP/RAND/PROG/M- BUTTON, it will cycle through the following modes:

Repeat Mode and Random Mode

1. Repeat 1:
   Press the ****/REP/RAND/PROG/M- BUTTON once, the Repeat Indicator “REP” show on the LCD SCREEN. This single track of music will be repeated.

2. Repeat All:
   Press the ****/REP/RAND/PROG/M- BUTTO twice, the Repeat All Indicator ” REP ALL” show on the LCD SCREEN. The whole disc will be played continously.

3.  Press the /REP/RAND/PROG/M- BUTTON three times, the Random Indicator ” RAND” show on the LCD screen. Then press the FORWARD BUTTON or REWIND ****BUTTON All music will play in random order.

4. Press the ****/REP/RAND/PROG/M- BUTTON four times, it will return to normal CD playback.

Program Mode

1.  During the stop mode, press the ****/REP/RAND/PROG/M- BUTTON once. The number of program to be memorized will blink continuously.
2.  Press the FORWARD or REWIND BUTTON to your desired track, the LCD SCREEN will show the appropriate track number. Press the ****/REP/RAND/PROG/M- BUTTON.
3. Repeat above procedure until all desired tracks have been programmed. A total of 20 tracks can be stored in memory.
4.  Press the PLAY/PAUSE ****BUTTON once to start the program playback.
5.  To check the program you have stored after completing programming. During stop mode, then press the FORWARD ****BUTTON once, the LCD SCREEN will show the first programmed track number. Repeat above procedure to read all the programmed memory.
6.  Press and hold the ****/REP/RAND/PROG/M- BUTTON to cancel the programmed memory.

Playing audio via Bluetooth

1.  Press the MODE BUTTON to select Bluetooth mode. “BT” blinks continuously on the LCD SCREEN, and the unit is now in pairing mode.
2.  Verify that the Bluetooth function of Bluetooth device is enabled.
3.  Choose the Bluetooth menu in your Bluetooth device, and from the found devices, select the “GC04B”. If you are prompted to enter the PIN code, please enter “O000” four zeros)
4.  For more information, see the user manual of Bluetooth device.
5.  After a successful pairing, the “BT” will show on the LCD SCREEN. Then play the music from the Bluetooth device.

Playing audio via USB port

1. Press the MODE BUTTON to select USB mode. The LCD SCREEN shows “USB”.
2. Insert a USB drive into the USB port, the total number of the folder(s) and then the track(s) show on the LCD SCREEN. Then the first track will play automatically.
3. All functions are operated same as CD playback.

Playing Other Audio Devices
The player features an AUX IN jack to facilitate playback from other audio devices (MP3 players, mobile phones, etc.) through 3.5mm plug aux cable.

1.  Insert a 3.5mm plug aux cable (not included) into the AUX IN jack in the front of the player.
2.  Press the MODE BUTTON to select AUX IN mode, the LCD Screen will show “AUX.
3.  Turn the audio device on and follow the playback instructions found in its owner’s manual.

Note: When an audio device is plugged into this player while a CD is playing, CD playback will stop automatically.

Listening to the music by using the headphone
A stereo headphone jack is provided for private listening. To listen to the player with headphones (not included), insert the 3.5mm mini-stereo plug from the headphones into the HEADPHONE JACK. The external speakers are automatically disconnected when headphones are used.

SPECIFICATIONS

• Audio Output: 2W AS() +2Wns(R)
• Frequency Range: FM: 88MHz 108MHz
• Connectivity: 3.5mm AUX-IN Jack/3.5mm Headphone Jack/Power input jack
• Power Requirement: AC 120V, 60Hz Battery 9V(6 x “C” size or UM2 batteries, not included)
• Power Consumption: S15W
• Unit Dimensions (WxHxD): 9.6″ x 4.9″ x 9″ (245mm x 125mmx 230mm)
• Unit Weight: 2.86Lbs (1.3kg)

USER SAFETY GUIDE

IMPORTANT SAFETY INSTRUCTIONS

• The lightning flash with an arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un- insulated “dangerous voltage” within the product’s enclosure that be of sufficient magnitude to constitute a risk of electric shock to a person.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating, maintenance and servicing instructions in the literature accompanying the appliance.

Dripping warning: “This product shall not be exposed to any dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on or near the product.”
Ventilation warning: “The normal ventilation of the product shall not be impeded for intended use.” (Minimum distances must be kept around the apparatus for sufficient ventilation, especially while use of the apparatus is in tropical and/or moderate climates.)

INSTRUCTIONS ON ENVIRONMENT PROTECTION
Do not dispose of this product in the usual household garbage at the end of its life cycle; bring it to a collection point for the recycling of electrical and electronic appliances. This symbol on the product means the instructions for use or the packing will inform about the methods for disposal. The materials are recyclable as mentioned in its marking. By recycling, material recycling, or other forms of re-utilization of old appliances, you make an important contribution to protect the environment. Please inquire at your local community administration for the authorized disposal location.

IMPORTANT SAFETY PRECAUTIONS

1. READ INSTRUCTIONS All safety and operating instructions should be read before the appliance is operated.
2. RETAIN INSTRUCTIONS – The safety and operating instructions should be retained in a secure place for future reference.
3. HEED WARNINGS – All warnings on the appliance and in the operating instructions should be observed.
4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed.
5. WATER AND MOISTURE The appliance should not be used near water. For example: near a bathtub, kitchen sink, laundry tub, and Swimming pool or even in a wet basement.
6. VENTILATION The appliance should be situated so that its location and position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings or, be placed in a builtin installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.
7. HEAT – The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
8.   POWER SOURCES- The appliance should be connected to a power supply onlyof the type described in the operating instructions or as marked on the appliance.
9.   GROUNDING AND POLARIZATION – Precautions should be taken to ensure that the grounding or polarization of the appliance is Correct.
10.   POWER CORD PROTECTION Power supply cords should be routed so that they are not ikely to be walked on or obstructed by items placed upon or against them. Pay particular attentionto cords at plugs, convenience receptacles, and the point at which they exit from the appliance.
11.   CLEANING The appliance should be cleaned only as recommended by the manufacturer.
12. POWER LINES -An outdoor antenna should be located away from power ines.
13. NONUSE PERIODS The power cord of the appliance should be unplugged from the outlet when the appliance is to be left unused for an extended period of time.
14. OBJECT and LIQUID ENTRY – Care should be taken so that objects do not fall and liquids are not spilled into the device’s Dennis.
15.   CARTS AND STANDS The appliance should be used only with a cart or stand that is recommended by the manutacturer An appliance and cart combination should be moved with care. Quick stops, excessive force
16.   WALL OR CEILING MOUNTING f the appliance is mounted toa wall or ceiling, it should be mounted only as recommended by the manufacturer.
17. DAMAGE REQUIRING SERVICE The appliance should be serviced by a qualified service professional when:
    • a. The power-supply cord or plug has been damaged.
    • b. Objects have fallen into, or liquid has been spilled into the appliance’s apertures.
    • c. The appliance has been exposed to rain.
    • d. The appliance has been dropped and suffered damage.
    • e. The appliance does not appear to operate normally or exhibit marked change in performance.
18.   SERVICING The user should not attempt to service the appliance beyond that described in the user’s operating instructions. All other servicing should be referred to a qualified service professional.
19. PROTECTIVE ATTACHMENT PLUG The appliance is equipped with an attachment plug that has overload protection. This is a safety feature. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug. (UK Version Only)

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

BASIC WARRANTY STATEMENT

We warrant the product to the original purchaser ONLY, to be free from defects in materials and workmanship under normal use for ONE Year from date of the original purchase. We agree, at our option, under the warranty period, to replace the product if it is determined to be defective at no charge. This limited warranty does not cover any loss or damages that occur as a result of:

• Cosmetic damage.
• Shipping or improper installation or maintenance.
• Misuse.
• Neglect.
• Any cause other than ordinary commercial or industrial application.
• Adjustment by non-authorized source or any of the products firmware or hardware that you or any third party have modified or altered
• Improper environment
• Excessive or inadequate heating or air conditioning or electrical power failures, surges, connection to improper voltage supply or settings or othe irregularities.
• Accidents, acts of God.

To obtain factory service, the original purchaser MUST present the following:

1.  A sales receipt/proof of purchase indicating date of purchase.
2.  Your Name, Place of Purchase, Address, Unitodel, and Description of Problem.
3.  Send the unit pre-paid to the address below in the original packaging or a reasonable substitute to prevent damage. No return ill be shipped back to a PO BOX.
4.  All of the accessories that came with the product package must be sent along with the main unit.
5.  Please include your check or money order in the amount of $15.00, payable to SGM Direct, to cover handling and return shipping charges. We will not be responsible for delays or unprocessed claims resulting from a purchaser’s fails to provide any or all of the necessary information.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>