ASUS Q22195 ROG Gladius III Wireless AimPoint EVA-02 Edition User Guide

ASUS Q22195 ROG Gladius III Wireless AimPoint EVA-02 Edition

Product Information

• Package Contents: Mouse, USB dongle, USB cable
• Mouse Features: Connection mode switch, Mouse feet, Pairing button, Optical sensor, Profile button, Rubber cover
• Profile Switching: The gaming mouse has 5 profiles that can be switched using the profile button on the bottom of the mouse. Each profile has different lighting effects and colors.
• Switches: The mouse has replaceable switches with different DPI options ranging from 100 DPI to 36000 DPI.
• Mouse Feet: The mouse feet can be replaced for smoother movement.
• USB Dongle: The USB dongle is used for wireless connectivity.

Product Usage Instructions

Profile Switching

Press the profile button on the bottom of your gaming mouse to switch through the 5 profiles available. Refer to the table below for more information on the profiles and their corresponding lighting effects:

Replacing the Switches
To replace the switches, follow the instructions provided in the user manual.

Replacing the Mouse Feet
To replace the mouse feet, follow the instructions provided in the user manual.

Removing the USB Dongle
To remove the USB dongle, simply disconnect it from the USB port on your computer.

Storing the USB Dongle
When not in use, store the USB dongle in a safe place to prevent loss or damage.

Updating the Firmware and Customization

1. Connect your gaming mouse to your computer using the bundled USB cable and USB dongle.
2. Download and install the Armoury Crate software from https://rog.asus.com.
3. Follow the software instructions to update your gaming mouse firmware.
4. Customize your gaming mouse using Armoury Crate.

Switching between Bluetooth Host Devices
To switch between Bluetooth host devices, follow these steps:

1. Set the connection switch to Bluetooth mode.
2. Press the pairing button for 3 seconds to switch between different host devices your gaming mouse is already paired to.
3. The LED on your gaming mouse will blink for 1 second depending on the host switched to.

Using RF Wireless Mode

1. Connect the USB dongle to a USB port on your computer.
2. Set the connection switch to the RF 2.4G Wireless mode.

Using the DPI On-The-Scroll Tuning Function

T he DPI On-The-Scroll tuning function allows you to customize the DPI of your gaming mouse without using Armoury Crate. Follow these steps:

1. Press and hold the DPI button for 3 seconds until the LED on your gaming mouse lights up.
2. Scroll the scroll wheel forwards or backwards to adjust the DPI. The LED color hue on your mouse will differ depending on the DPI adjustment.
3. Press the DPI button once you have finished customizing the DPI value to save the changes made.

Pairing Bluetooth Mode for the First Time

To pair Bluetooth mode for the first time, follow these steps:

1. Set the connection switch to Bluetooth mode.
2. Scroll the scroll wheel forwards or backwards to adjust the DPI. The LED color hue on your mouse will differ depending on the DPI adjustment.
3. Press the DPI button once you have finished customizing the DPIvalue to save the changes made.

Pairing Bluetooth Mode to Additional Host Devices (Max. 3)

To pair Bluetooth mode to additional host devices, follow these steps:

1. Set the connection switch to Bluetooth mode.
2. Press and hold the pairing button for 3 seconds until the LED on your gaming mouse starts to blink blue.
3. Once your gaming mouse has been successfully paired, the LED indicator on your gaming mouse will light up blue for 3 seconds.

Package Contents

Mouse Features

1. Scroll wheel
2. Right-click button
3. DPI button
4. Left-click button
5. Forward button
6. Backward button
7. USB Type-C® connector
8. Connection mode switch
9. Mouse feet
10. Pairing button
11. Optical sensor
12. Profile button
13. Rubber cover
14. USB dongle

Profile switching
Press the profile button on the bottom of your gaming mouse to switch through the 5 profiles available. For more information on the profiles and the lighting effects, please refer to the table below:

Specifications

Replacing the switches

Updating the firmware and customization

1. Connect your gaming mouse using the bundled cable and the USB dongle to USB ports on your computer.
2. Download and install the Armoury Crate software from https://rog.asus.com.
3. Follow the software instructions to update your gaming mouse firmware.
4. Customize your gaming mouse using Armoury Crate.

Connecting your gaming mouse

Using the bundled cable
Connect the bundled USB Type-C® to Type-A cable to your gaming mouse and a USB port on your computer.

Using RF wireless mode

1. Connect the USB dongle to a USB port on your computer.
2. Set the connection switch to the RF 2.4G Wireless mode.

Pairing Bluetooth mode for the first time

1. Set the connection switch to the Bluetooth mode.

Pairing Bluetooth mode to additional host devices (max. 3)

1. Set the connection switch to the Bluetooth mode.
2. Press and hold the Pairing button for 3 seconds until the LED on your gaming mouse start to blink blue. Once your gaming mouse has been successfully paired, the LED indicator on your gaming mouse will light up blue for 3 seconds.

Switching between Bluetooth host devices

Press the Pairing button to switch between different host devices your gaming mouse is already paired to. The LED on your gaming mouse will blink for 1 second depending on the host switched to.

Using the DPI On-The-Scroll tuning function
The DPI On-The-Scroll tuning function allows you to customize the DPI of your gaming mouse without using Armoury Crate.

1. Press and hold the DPI button for 3 seconds until the LED on your gaming mouse light up.
2. Scroll the scroll wheel forwards or backwards to adjust the DPI. The LED color hue on your mouse will differ depending on the DPI adjustment.
3. Press the DPI button once you have finished customizing the DPI value to save the changes made.

Safety Guidelines

Keep the device away from liquid, humidity, or moisture. Operate the device only within the specific temperature range of 0°C(32°F) to 40°C(104°F). When the device exceeds the maximum temperature, unplug or switch off the device to let it cool down.

Notices

Limitation of Liability

Circumstances may arise where because of a default on ASS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the list contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement.
This limit also applies to ASS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD- PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVE IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed ar used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no quarantee that interference will not occ in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION! The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-003(B)/NMB-003(B)

RF Exposure Warning other antenna or transmitter.
The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.

ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.

Proper disposal

• DO NOT throw the device in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
• DO NOT throw the device in fire.
• DO NOT short circuit the contacts.
• DO NOT disassemble the device.

Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Innovation, Science and Economic Development Canada (ISED) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
This device has also been evaluated and shown compliant with the ISED RF Exposure limits under portable exposure conditions. (antennas are less than 20 cm of a person’s body).

Accessories that came with this product have been designed and verified for the use in connection with this product. Never use accessories for other products to prevent the risk of electric shock or fire.

Lithium-lon Battery Warning

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

NCC: Wireless Statement
VCCI: Japan Compliance Statement
VCCI Class B Statement
KC: Korea Warning Statement

Ukraine Certification Logo
EAC Certification Logo
EHL
Regional notice for Singapore
Complies with IMDA Standards DB103778
France sorting and recycling information
This ASUS product complies with IMDA Standards.

Points de collecte sur www.quefairedemesdechets.fr

CE RED RF Output table (Directive 2014/53/EU)

UKCARF Output table (The Radio Equipment Regulations 2017)

KC RF Output table

2.4GHz wireless

| (2402-2480MHz) – Mouse| 6.3mW
(2402-2480MHz) – Dongle| 5mW
BLE| (2402-2480MHz) – Mouse| 2.5mW

CE Mark Warning
ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at:

Simplified UKCA Declaration of Conformity
ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of conformity is available at https://www.asus.com/support/

Service and Support
Visit our multi-language website at https://www.asus.com/support/.

References

• Официальная служба поддержки | ASUS России
• Official Support | ASUS Global
• ASUS в СНГ
• Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.
• ROG - Republic of Gamers｜Global | For Those Who Dare
• ROG - Republic of Gamers｜Global | For Those Who Dare
• Official Support | ASUS Global

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>