ORACLE F-250 Side Mirrors Installation Guide
- June 13, 2024
- Oracle
Table of Contents
F-250 Side Mirrors
Installation Guide
F-250 Side Mirrors
STEP: 1
WATCH THE VIDEO SCAN QR OR VISIT:
WWW.VIMEO.COM/819902580
https://vimeo.com/819902580/ddcff8100f
ON THE INSIDE OF THE DOOR, USE A PANEL TOOL TO REMOVE THIS TRIM PIECE.
NEXT, DISCONNECT
THESE TWD PLUGS AND LOOSEN THE TWO 10MM NUTS AND 10MM BOLTS.
USING A PANEL
TOOL, DEPRESS THIS CLIP TO FULLY REMOVE THE MIRROR. USING A PANEL TOOL, REMOVE
THE LOWER MIRROR GLASS BY DEPRESSING THE CLIPS.
DISCONNECT THESE TWO MIRROR HEATER PLUGS FROM THE MIRROR
GLASS
USING A FLAT HEAD
SCREWDRIVER, DEPRESS THESE CLIPS TO DISCONNECT THE UPPER MIRROR GLASS.
DISCONNECT THE
HEATER PLUGS AND BLIND SPOT INDICATOR PLUG FROM THE MIRROR GLASS.
REMOVE THE (5) 7MM
SCREWS.
DEPRESS THIS TAB
TO REMOVE THE PUDDLE LIGHT. DISCONNECT THE PUDDLE LIGHT.
USING A PANEL TOOL, PRY THE MIRROR CAP FROM THE
MIRROR HOUSING.
USING A FLAT HEAD
SCREWDRIVER.DEPRESS THIS CLIP. MIRROR CAP CAN NOW BE REMOVED.
INSTALL THE NEW
ORACLE LED MIRROR CAP IN THE PLACE OF OEM MIRROR CAP. 
THE POWER PLUG THAT IS CONNECTING TO THIS TURN SIGNAL
HOUSING WILL BE USED TO TAP IN OUR WIRES.
T-TAP THE GROUND
[-) WIRE TO THE PINK WIRE. T-TAP THE POWER [+] WIRE TO THE RED WIRE.
THE CABLE FOR THE
MIRROR CAPS WILL RUN BEHIND THE TURN SIGNAL HOUSING. NOW RE-ASSEMBLE MIRROR IN
REVERSE ORDER.
www.oraclelights.com
© 2023 ORACLE LIGHTING 4401 Division St. Metairie, LA 70002
FOR ADDITIONAL TECHNICAL SUPPORT PLEASE CALL US 1(800)407-5776