BOWER USA WA-DUALCLP Dual Sided Clip On Light With Camera Mount User Manual

BOWER USA WA-DUALCLP Dual Sided Clip On Light With Camera Mount

Product Information

The Dual-Sided Clip-on Light with Camera Mount is a versatile lighting device that can be used for various purposes. It comes with a USB-C charging cable for convenient charging. The product includes the following parts:

• 1. Smooth Light
• 2. Diamond Crystal Light
• 3. Clip-on Mount
• 4. Clip-on Mount Button
• 5. USB-C Charging Port
• 6. RGB Mode Button
• 7. White Light Mode Button
• 8. Cold Shoe Mount
• 9. Camera Hole

Product Usage Instructions

Turn on/off light:

1. Press and hold the W button (long press) to turn on the device when the light is off.
2. When the light is on, press and hold the W button (long press) to shut it off.
3. The product has lamp memory, so every time the light is turned on, it will open to the same state as when it was turned off.

Switching between RGB and White Light Mode:

1. If the RGB mode is on (R button), press the W button (short press) to switch to White light mode.
2. In White Light Mode, press the W button repeatedly (short press) to change between different White Light Modes (warm, natural, white).
3. In White Light Mode, press the R button (short press) to switch to RGB Mode.
4. If the RGB mode is on, press the R button repeatedly (short press) to change between different RGB colors and Special Effects.

Switching between front/back light & dual lighting:

1. When the light is powered on, press and hold the R button (long press) to switch between front light, back light, and both sides powered on simultaneously.
2. Repeat this step until the desired choice appears.

Charging the device:

1. Use the provided USB-C charging cable.
2. Connect the USB-C end into the device and the USB-A end into any USB port (e.g., computer USB port, wall charger USB port, portable power bank USB port).
3. When the product is charging, the red light will remain steady.
4. When fully charged, the red light will go out.
5. If the red light blinks, it indicates that the battery is empty and needs to be recharged.

Mounting on to a camera:

Simply slide out the light from the Clip-mount and insert it into the camera hot-shoe mount.

Mounting on to a monitor, phone, tablet:

1. Push in the Clip-on Mount Button to open the clip.
2. Attach the clip to your device.
3. The clip can open up to 0.57 in. (max).

Limited Warranty:

This product comes with a one (1) year limited warranty provided by S. Bower Inc.TM. Please note that this warranty may have specific legal rights, and additional rights may vary from state to state. The warranty does not apply to products sold outside of the United States.

IN THE BOX

PRODUCT PARTS

1. Smooth Light
2. Diamond Crystal Light
3. Clip-on Mount
4. Clip-on Mount Button
5. USB-C Charging Port
6. RGB Mode Button
7. White Light Mode Button
8. Cold Shoe Mount
9. Camera Hole

HOW TO USE

Turn on/off light:
Press and hold the W button (long press) to turn on the device when the light is off. When the light is on, press and hold the W button (long press) to shut it off; This product has the function of lamp memory. Every time the ligh is turned on, it will open to the same state when the light was turned off.

Switching between RGB and White Light Mode:

• When the RGB mode is on(R button), press W button (short press) to switch to White light mode. Once in
• White Light Mode, press W button repeatedly(short press) to change White Light Modes (warm, natural, white).
• In White Light Mode, press the R button (short press) to switch to RGB Mode; When the RGB mode is on, press the R button repeatedly (short press) to change between RGB colors and Special Effects.

Switching between front/back light & dual lighting:

• The device has the ability to have either front or back light powered on, as well as both sides powered on simultaneously.
• When the light is powered on, press and hold the R button (long press) to switch between (front – back – double side). Repeat this step until desired choice appears.

Charging the device:

• Use provided USB-C charging cable and connect USB-C end into device and USB-A end into any USB port such as on a computer USB port, wall charger USB port, portable power bank USB port.
• When this product is charging, the red light is steadily on; When fully charged, the red light goes out. When the red light blinks the battery is empty and needs to be recharged.

Mounting on to a camera:
Simply slide out light from Clip-mount and insert into camera hot-shoe mount .

Mounting on to a monitor, phone, tablet:
Push in Clip-on Mount Button to open clip and attach to your device. Clip opens up to 0.57 in. (max).

Specifications

• Power: 4W
• Input: Type-C interface 5V/1.0A
• Power supply: Built-in 3.7V Lithium Battery
• Lithium battery capacity: 500mAh
• LED light beads qty: 40
• Light beads type: 5050 Lamp Bead
• Luminous angle: 120°
• Protection level IP: IP20
• Continuous lighting time: Up to 40 minutes
• Charging time: About 2 hrs
• Color temperature: 3000-7000k
• 3 White Light Modes, 6 RGB Colors, 6 Special Effect Modes ° Size: 3.6 in.(width) x 5 in.(height) x 1.9 in.(depth)

Warranty

LIMITED One (1) Year Limited Warranty

S. Bower Inc.™ One (1) Year Limited Warranty: This warranty gives you specific legal rights and you may have other rights which vary from state to state.
The S. Bower Inc.™ Limited Warranty is a voluntary manufacturer’s warranty provided to the consumer. This warranty provides rights separate to rights provided by consumer law, including but not limited to those relating to
non-conforming goods. S. Bower Inc.™ One-Year Limited Warranty benefits are in addition to, and not instead of, rights provided by consumer law and it does not exclude, limit or suspend a buyer’s rights arising from consumer law. Consumers have the right to choose whether to claim service under the S. Bower Inc.™ One-Year Limited Warranty or under their consumer law rights. The S. Bower Inc.™ One-Year Limited Warranty terms and conditions shall not apply to consumer law claims, contact your local consumer organization.
Please note: All claims made under the S. Bower Inc.™ One-Year Limited Warranty will be governed by the terms set out in this warranty document.
S. Bower Inc.™ warrants to the product owner that this product will be free against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase when used by S. Bower Inc.™ ’s user manual. Under this warranty, you will be able to send your claims and defective product to S. Bower Inc.™, via freight prepaid, along with proof of purchase, and will be repaired or replaced, based on S. Bower Inc.™ sole discretion. Repair and/or replacement may be made with new or refurbished product components at S. Bower Inc.™ sole discretion. This limited warranty does not cover failures due to abuse, accidental damage or when repairs have been made or attempted by anyone other than S. Bower Inc.™ personnel. A defective product meeting the warranty conditions set forth herein will be replaced or repaired at no charge in either of two ways: The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges. Proof of purchase may be required. Please check with the retailer for its specific return policy regarding time limits for returns or exchanges. The second option is to send the product (prepaid freight) to S. Bower Inc.™ corporate offices located at S. Bower Inc. 38-09 43rd Avenue 1st Floor Long Island City, NY 11101 for repair or replacement at S. Bower Inc.™ ’s option. Proof of purchase is required. Include name, return address, and issues that you are experiencing with S. Bower Inc.™ products. All other guarantees, express or implied, are hereby disclaimed.
This warranty does not apply to products sold in countries sold out of the United States.

©2023 S. Bower, Inc. All rights reserved.
All brand names and trademarks belong to their respective owners S. Bower, Inc. LIC, NY 11101 www.BowerUSA.com

References

• BowerUSA Consumer Photography Accessories and Electron

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>