LIGHTRONICS 3041P12 Archis Three Light Pendant Light Instructions

LIGHTRONICS 3041P12 Archis Three Light Pendant Light

Product Information

• The product is a fixture that requires installation. It does not require any special tools for installation. It is important to follow the provided steps in the given order for proper installation. Hanging the fixture on house electrical wires or installing it on a ceiling with a radiant type heating system is strictly prohibited. If there is any confusion regarding the installation process, it is recommended to consult a qualified electrician. Proper wiring is essential for the safe operation of this fixture.
• During fixture assembly, carefully remove the fixture from the carton and ensure that all parts are included as shown in the figure. Take care not to misplace any screws or parts required for installation.

Product Usage Instructions

1. Step 1: Install the universal mounting plate (J) onto the outlet box and secure it with the box screw (I).
2. Step 2: Assemble the rods (F) together. Thread the bottom end of rod (F) onto the nipple (E) and the swivel (L) onto the top end of rod (F).
3. Step 3: Connect the wires. After connecting the wires, carefully tuck them inside the outlet box.
4. Step 4: Put the canopy (G) on the mounting screw (K) and secure them with the nut (H).
5. Step 5: Install the bulb (A) (bulb not included) on the socket (B).
6. Step 6: Put the glass shade (C) on the bracket (M) and secure it with screw (N).
   • To clean the fixture, use a soft cloth for wiping. Clean the glass with mild soap. Avoid using abrasive materials such as scouring pads, powders, steel wool, or abrasive paper.
   • If any parts need replacement, keep this sheet for future reference and contact the place of purchase to order the exact replacement parts.
   • It is important to note that the line art shown may not exactly match the enclosed fixture, but the installation instructions still apply to this specific fixture.

Product Details

• Item No: 3041P12
• Item No: 3041P18

FOR YOUR SAFETY

WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF; EITHER THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS SHUT OFF. GENERAL You don’t need
special tools to install this fixture. Be sure to follow the steps in the order given. Under no circumstances should a fixture be hung on house electrical wires, nor should a swag type fixture be installed on a ceiling which contains a radiant type heating system. Read instructions carefully. If you are unclear as to how to proceed, consult a qualified electrician. NOTE: Proper wiring is essential for the safe operation of this fixture.

GENERAL

You don’t need special tools to install this fixture. Be sure to follow the steps in the order given. Under no circumstances should a fixture be hung on house electrical wires, nor should a swag type fixture be installed on a ceiling, which contains a radiant type heating system. Read instructions carefully. If you are unclear as to how to proceed, consult a qualified electrician.
NOTE: Proper wiring is essential for the safe operation of this fixture.

FIXTURE ASSEMBLY

Carefully removed the fixture from the carton and check that all parts are included as shown in figure. Be careful not to misplace any of the screws or parts, which are needed to install this fixture.

INSTALLATION

IMPORTANT: Do not attach fixture directly to outlet box.

• STEP1: Install universal mounting plate(J) onto the outlet box, and secure with box screw(I).
• STEP2: Assemble the rods (F) together, then thread the bottom end of rod (F) onto the nipple(E) and the swivel(L) onto the top end of rod(F).

GROUNDING INSTRUCTIONS

• STEP 1:
  Insert the green grounding screw into the hole with two raised dimples on the circular strap. Wrap the ground wire from the fixture (if supplied) around the green grounding screw, then connect it to ground wire from the outlet box (if not fixed on the outlet box) using a wire connector (not supplied). If ground wire from the fixture is not supplied, wrap the ground wire (if not fixed on the outlet box) from the outlet box around the green grounding screw and tighten it.

NEVER CONNECT GROUND WIRE TO BLACK OR WHITE

ridged)

WHITE OR GREY WITH TRACER| WHITE OR GREY WITHOUT TRACER
BROWN GOLDOR

BLACK WITHOUT TRACER

| BROWN, GOLD   OR   BLACK  WITH TRACER

• STEP 2: Take note of the color of the wire(s) on your fixture. Identify which group your fixture wire(s) falls into and connect the wires according to the directions below:
  *NOTE: When parallel wire (SPT-I & SPT-2) is used, the tracer wire is square shaped or ridged and the less tracer wire is round in shape or smooth (seen best when viewed from wire end.)

• STEP 3: Take your fixture wire(s) from group A and place evenly against the black wire from the outlet box. Do NOT twist wires together before using wire connectors.

• STEP 4: Fit a wire connector (not supplied) over the wires and screw the connector clockwise until you feel a firmness.

• STEP 5: zTry gently to pull the connector off the wires. If you can pull the connector off, carefully re-do steps 3 and 4, as above, and check again for a firm connection

• STEP 6: Connect the fixture wire from group B to the white wire from the outlet box in the same manner

FINAL ASSEMBLY

• STEP1: After wires are connected, tuck them carefully inside outlet box.
• STEP2: Put the canopy (G) on the mounting screw (K) and secure them with the nut (H).
• STEP3:I nstall the bulb (A) (NO INCLUDED BULB) on the socket (B)
• STEP4: Put the Glass Shade (C) on the Bracket (M) and secure with screw(N).

CLEANING

To clean, wipe fixture with a soft cloth. Clean glass with a mild soap. Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.

ORDERING PARTS

Keep this sheet for future reference, and in case you need to order replacement parts. All parts for this fixture can be ordered from place of purchase. Be sure to use exact wording from illustration when ordering parts.

Line art shown may not exactly match the fixture enclosed. However, the installations do apply to this fixture.
ITEM NO:

• 3041P12
• 3041P18

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>