artika CLGL-HD1 Ceiling LED Light Fixture Glam Instruction Manual

June 13, 2024
artika

artika-logo

artika CLGL-HD1 Ceiling LED Light Fixture Glam

artika-CLGL-HD1-Ceiling-LED-Light-Fixture-Glam-product

Product Information

  • Made in China
  • Residential use only
  • Indoor use only
  • Manufacturer: GlamTM
  • Model: Ceiling LED Light Fixture

Usage Instructions

  1. Ensure that the power is turned off at the circuit breaker and light switch before starting the installation process.
  2. Install the mounting bracket to the junction box by placing marks on the ceiling where the retaining screw holes will be located. Attach the mounting bracket to the junction box using the provided junction box screws.
  3. Attach the hook to the mounting bracket.
  4. Connect the white wire (N) from the light fixture to the white supply wire (N) from the junction box using a wire connector.
  5. Connect the black wire (L) from the light fixture to the black supply wire (L) from the junction box using a wire connector.
  6. If using a dimmer, ensure that it is LED-compatible.
  7. Turn on the main electrical supply from the fuse box/circuit breaker after installation is complete.

What You Will Need:

  • Screwdriver
  • Drill
  • Wire connector (provided)

Safety Precautions

  • Turn off the breaker at the panel before starting any installation or maintenance.
  • Do not use the product outdoors.

INSTRUCTIONS

IMPORTANT : READ CAREFULLY AND KEEP.

INCLUDED
artika-CLGL-HD1-Ceiling-LED-Light-Fixture-Glam-fig-
\(1\)

WHAT YOU WILL NEED…

artika-CLGL-HD1-Ceiling-LED-Light-Fixture-Glam-fig-
\(2\)

CAUTION: If using a dimmer, it must be LED-compatible.

IMPORTANT
The installer and/or user must read, understand, and follow these instructions before installing the product. This product must be properly installed before it is used. If instructions are not followed, the manufacturer will not be held responsible for any problems or product malfunction. Failure to follow installation and/or operating instructions voids the warranty. We recommend that this product be installed by a certified electrician. In some states or provinces, it is a legal requirement for this type of product to be installed by a certified electrician, according to the electrical and building codes effective in the region where the unit is used.

This product is compatible with most LED dimmers

WARNING: Risk of electrical shock.

  • Turn off breaker at the panel.
  • Switch off the main electrical supply from the fuse box/circuit breaker before installing the unit or doing any maintenance.
  • Do not use outdoors.

WARNING: Risk of electrical shock.

  • Turn off the breaker at the panel.

STEP-BY-STEP INSTALLATION

  1. Turn off the power at the circuit breaker and the light switch. Ensure the power is off before continuing.
  2. Install the mounting bracket to the junction box. Place marks on the ceiling where the retaining screw holes will be located. Remove the mounting bracket.
  3. Drill pilot holes in the ceiling with a ¼ in. (6.5 mm) drill bit Push wall anchors into the holes.
  4. Attach the mounting bracket to the junction box with the two junction box screws (fig. 1).artika-CLGL-HD1-Ceiling-LED-Light-Fixture-Glam-fig- \(3\)
  5. Attach the hook to the mounting bracket.
  6. Connect the white wire (N) from the light fixture to the white supply wire (N) from the junction box using a wire connector.
    • Connect the black wire (L) from the light fixture to the black supply wire (L) from the junction box using a wire connector.
    • Connect the ground wire (G) from the light fixture to the ground supply wire (G) from the junction box using a wire connector (fig. 2).artika-CLGL-HD1-Ceiling-LED-Light-Fixture-Glam-fig- \(4\)
  7. Put the wires into the ceiling lamp.
  8. Mount the canopy onto the mounting bracket and secure it with the canopy screws (fig. 3).artika-CLGL-HD1-Ceiling-LED-Light-Fixture-Glam-fig- \(5\)
  9. Restore electrical power.

WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for Class B digital devices, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

WARRANTY
Artika For Living Inc. is proud to offer you a five (5) year limited warranty on manufacturing defects from the date of purchase for residential use only. The warranty is extended to the original owner in USA and Canada and is non- transferable. It does not apply to retailers, commercial applications or establishments. The original sales receipt is required for all warranty claims. The remedy under this limited warranty shall be product or part replacement at Artika’s discretion as provided herein and cannot exceed the original purchase price.

This warranty is valid only on products installed in accordance with the building code and laws effective in the region where the unit is used as well as in accordance with the provided instruction manual. It does not cover products installed incorrectly or subjected to abnormal use. Product(s) or component part(s) may be required to be returned for inspection and verification. Normal wear and tear, misuse, negligence, vandalism, improper maintenance (surface damage due to chemical interaction or cleaning agents including, but not limited to, scouring pads, use of cleaners containing abrasives, alcohol or other organic solvents) improper handling, accident, abuse, fire, flood, theft, acts of God, neglect, or alteration of the product will not be covered under this limited warranty. It excludes any accessories that accompany the product including but not limited to bulbs or batteries.

The warranty does not cover handling, labor, transportation, or any other cost associated with the installation or replacement of the product. This limited warranty is valid in the country of purchase and by Artika authorized retailers only. Artika for Living Inc. will not be held responsible for any direct or consequential damages or injuries related to the use of this product arising from improper use or installation of this product.  Please visit www.artika.com to discover more about Artika for Living Inc.

Artika For Living Inc. 1756, 50th Avenue Montréal (Lachine), Québec Canada H8T 2V5

Customer Service
Monday to Friday 9 a.m. – 5 p.m. EST

Imported by:
Home Depot U.S.A., Inc. 2455 Paces Ferry Rd., NW Atlanta, GA 30339 For assistance, call/Pour assistance, appeler/: 1-877-527-0313 www.homedepot.com

Made in China
Residential use only Indoor use only

Rev. 07-09-2023

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals