HINKLEY 29604 22 Inch Outdoor Wall Mount Instruction Manual

HINKLEY 29604 22 Inch Outdoor Wall Mount

Product Information

• The product is a fixture that includes a mounting plate, backplate, glass panels, cage, screws, and a medium base bulb. It is designed for installation in a clear area and requires electrical wiring connections.
• The product is manufactured by HINKLEY, a company located at 33000 Pin Oak Parkway, Avon Lake, OH 44012. For any inquiries or support, you can contact them at 800.446.5539 or 440.653.5500. More information can be found on their website: hinkley.com.

Product Usage Instructions

1. Find a clear area in which you can work.
2. Unpack the fixture and glass from the carton.
3. Carefully review the instructions prior to assembly.
4. Release the mounting plate (5) from the backplate (3) by removing screws (1).
5. Secure the mounting plate (5) to the junction box (7) using screws (not provided).
6. If additional support is needed for the mounting plate (5), use keyholes (6) and appropriate mounting hardware (4).
7. Make wiring connections using IS-18 as instructed on the next page.
8. Slide the glass panels (11) into the cage (10). The glass panels will be held in place by tabs (12).
9. Use screws (1) to re-secure the mounting plate (5) to the backplate (3).
10. Lamp the fixture using an appropriate medium base bulb (8) – Drawing 2.
11. Secure the cage (10) to the backplate (3) using screws (9).

SAFETY WARNING:

• Read the wiring and grounding instructions (I.S. 18) and any additional directions. Turn off the power supply during installation. If new wiring is required, consult a qualified electrician or local authorities for code requirements.
• Make electrical connections from the supply wire to the fixture lead wires. Refer to the instruction sheet (I.S. 18) and follow all instructions to make all necessary wiring connections. Then refer back to this sheet to complete the installation of this fixture.

start here

1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.

Assembly Instructions

1. Release mounting plate (5) from backplate (3) by removing screws (1)
2. Secure mounting plate (5) to junction box (7) using screws (not provided)
3. If additional support is needed for mounting plate (5) use key holes (6) and appropriate mounting hardware (4)
4.  Make wiring connections using IS-18 on the next page
5. Slide glass panels (11) into cage (10) glass panels will be held in place by tabs (12)
6. Use screws (1) to re-secure mounting plate (5) to backplate (3)
7. Lamp fixture using appropriate medium base bulb (8) -Drawing 2
8. Secure cage (10) to backplate (3) using screws (9)

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Make electrical connections from supply wire to fixture lead wires. Refer to instruction sheet (I.S. 18) and follow all instructions to make all necessary wiring connections. Then refer back to this sheet to complete installation of this fixture.

DRAWING 1 – Fixture Installation

DRAWING 2 – Fixture Installation

DRAWING 3 -Glass install

33000 Pin Oak Parkway 33000 Pin Oak Parkway AAvon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleyvon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkley.com

References

• HINKLEY - Lighting and Ceiling Fans

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>