boAt HD 1.39 Lunar Comet User Manual
- June 13, 2024
- Boat
Table of Contents
boAt HD 1.39 Lunar Comet
LUNAR COMET
- Thank you for choosing the boAt Lunar Comet as your fitness transformation companion.
- Allow this manual to guide you through the functioning of your smartwatch. Please read it thoroughly before using it for a smooth sail. You may refer to these instructions for later use as well.
Package Contains
- boAt Lunar Comet X1
- USB magnetic charging cable x1
- User Manual x1
- Warranty Card ×1
CHARGING THE WATCH
- The smartwatch must be charged before initial use. It takes up to 2 hours to be fully charged.
- Connect and charge the watch with the image below as a reference, using a 5V/2A adapter.
TURNING THE WATCH ON/OFF
- To restart or turn the watch on/off, long-press the side button for 3-5 seconds.
- You can wake up the screen by lifting your wrist.
CONNECTING TO THE APP
- Download the boAt Crest app on your phone.
- Available on both the App Store (iOS 12.0 and above) and Google Play Store (Android 7.0 and above) OR
- Scan [QR CODE] (Also available on the watch)
- Connect the device with the boAt Crest app; ensure that the phone’s Bluetooth. as well as the GPS functionalities are turned on
- Select Lunar Comet on the app’s home screen and click Pair to connect.
- Once connected, you will get an alert to connect with LUNARCOMET_XXXX, click pair if need to receive or make calls from the watch
- To use all your Lunar Comet features seamlessly, tap on ‘yes’ to the ‘connection’ & ‘grant access’ system prompt.
- Disable battery optimization
Note: To ensure connectivity throughout your journey, make sure the app is allowed to always run in the background of your phone.
SYNCING YOUR SMARTWATCH TO THE APP
Data Synchronization
- Open the app on your phone.
- Make sure your Lunar Comet is connected to the app
- Synchronization will start automatically once you enter the app interface.
Note:
- Synchronize data at least once a day to avoid data loss in the watch.
NAVIGATING THROUGH THE FUNCTIONS SHORT PRESS THE SIDE BUTTON FOR THE MAIN MENU Sports
- Choose from multiple sports modes like Run, Treadmill, and Walking.
- Cycling, Climbing, Walking, Basketball, Badminton, Football, Yoga and free movement,
- You can also add or replace the activities according to your preference through the smartwatch. Only one activity will be replaced on the watch.
- Tap on any sports mode to start the activity, click the go button, and the watch will start recording the duration of the activity. Short press the side button to pause or stop the activity.
- The activity will not be recorded if it is less than 3 mins,
Sports Records
- Sync your smartwatch to the app to get a detailed record of your activities
PHONE
Contacts
- Add up to 10 contacts from the Boat Crest app. You can select any contact to directly dial from the watch.
Call History
- You can find recently received, missed, and outgoing call logs in the call history of the watch.
Dialpad
- Use a dial pad to dial any number from the watch.
Heart Rate Monitor
- Wear the watch on your wrist, then click on the icon to start measurements.
- You can view the detailed data through the app
- Note: Measurements are for reference only and not for medical purposes
Activity
- Click on this to check your daily activity data like step count, calories, and distance covered
Sleep Monitor
- Tap on the icon to review the sleep data of the previous night.
- Once the asleep criteria are met, your smartwatch will start recording from 8 p.m. at night to 10 a.m. in the morning the next day.
- Once you lie down and watch detects no movement for 30 minutes, it will start recording and will stop recording if it detects excessive movement.
- You can check the data on the app only after the awake criteria are met.
- You can also track sleep scores on the watch or through the boAt Crest app.
Note:
- For accurate sleep data recording, the asleep criteria have to be met, including limited movement, wrist positions and angles, and more.
- The awake criteria will be met only after it records some noticeable movement
Stress monitoring
- Click this option to start the stress monitoring. Make sure you wear your watch on your wrist properly to get accurate results.
Analysis of the measurement is
- Relax: 1-29
- Normal: 30-59
- Medium: 60-79
- High: 80-100
- Note: Measurements are for reference only and not for medical purposes.
Sp02 monitoring
- Wear the watch on your wrist, then click on the icon to start measurements.
- You can view the detailed data through the app.
- Note: Measurements are for reference only and not for medical purposes.
Alarm
- Tap on this to set an alarm on your watch,
Notifications
- You can check all the notifications from here.
Camera Control Mode
- Tap on the remote camera icon on your smartwatch to click a photo from your phone
- Note: Turn the camera on from your phone to use this feature
Music Control
- Tap on the remote music control icon on your watch to play music from your phone.
- Note: Some apps with different protocols might not work.
Weather
- Connect with the boAt crest app to get daily weather updates on the watch,
Timer
- Tap on this to turn on the timer.
Find My Phone
- Tap on this icon to find your phone. Once enabled, your phone will start ringing and vibrating. Tap again to stop it.
- Note: Your smartwatch should be connected to your phone via Bluetooth and within its range for this feature to work.
Stopwatch
- Click on this to start the stopwatch on your watch.
App OR Code
- Tap on this and scan the bar code from mobile to download the app and connect the watch.
Voice Assistant
- Tap on this to enable the voice assistant feature and give the command from the watch. The results will be seen on the phone.
- Note: Make sure the watch is connected to the app and the phone is unlocked
World clock
- Click on the world clock to check time across the globe.
SETTING
Brightness
- Tap on this to adjust the brightness
Theme
- Tap on this to select a theme
Reboot
- Tap on this to reboot the watch.
Power Of
- Tap on this to switch your watch off.
Factory Reset
- Tap on this to reset the watch data.
- Note: All data will be erased if the watch is reset
Power Saving Mode
- Tap on this to enable power-saving mode.
- Note: Some features may not work when the mode is enabled.
Password
- Tap on this to set a password.
Notification Settings
- Tap on this to enable light and vibration when a notification is received.
Screen On Time
- Tap on this to set the screen time.
About
- Shows the device details.
Swipe down for the shortcut menu
- You can access Switch Audio, DND, and Flashlight. Brightness, and settings
Swipe left or right to access all data.
- You can access activity, heart rate, SpO2, stress, sleep, menstrual tracker, music, weather, and phone.
Swipe up to access the notifications.
- You can check all the notifications from here.
Functionality of the Side Button
- You can rotate the side button to change the watch faces Short press the side button to go back to the previous function.
PRODUCT PARAMETERS
MAINTENANCE
- Regularly clean your wrist and the strap of the smartwatch, especially after sweating during exercise or being exposed to substances such as soap or detergent, which may get stuck on the other end of the product
- Do not wash the strap with a household cleanser. Please use soap less detergent, rinse thoroughly and wipe with a piece of soft towel or napkin.
- For spots or stains that are not easy to remove, scrub the area with rubbing alcohol and then follow the above procedure
FAQ
Search for the app to connect keeps failing.
- Keep the boAt Crest app updated to the latest version
- Close all the programs on the watch -> Stop and restart Bluetooth and GPS -> Connect again
- Check and enable the notification functions of your phone and keep the phone and watch in close contact.
Note: Make sure your phone system meets Android 7.0 and above and iOS 12.0 and above.
My Watch Lunar Comet is receiving no alerts, texts, or phone calls.
- Make sure smart reminders on the app are on and synced to Lunar Comet Also, make sure the notification centre of the phone is displaying messages. Only then will your smartwatch also display those notifications.
Make sure the app is running in the background and the battery optimization feature on the phone is disabled
My Bluetooth keeps getting disconnected.
- Make sure there is not more than 7m distance between Bluetooth on the phone and the watch.
- There is no obstacle between the watch and the phone.
- Make sure the app is running in the background.
Which functions of Lunar Comet need Bluetooth to work?
Call and text Notifications, Find My Phone, music control, camera control,
weather forecast, cloud and custom watch faces and Bluetooth calling need
Bluetooth connectivity to work.
Will it be okay to take a bath wearing Lunar Comet?
The IP67 water resistance will only work under the following conditions:
- Maximum depth of water: 1.5m
- Maximum time for exposure to water: 10 minutes
The watch isn’t suitable for hot baths, hot springs, saunas, snorkeling, diving, water skiing, and other wading or deep-water activities with high- speed water flow.
SAFETY & PRODUCT INFORMATION
Battery
- Do not disassemble, bore, or damage the battery
- Do not disassemble the built-in batteries of non-replaceable battery devices.
- Do not use sharp objects to remove the battery.
Health Warning
- If you are wearing a pacemaker or other implanted electronic devices, please consult your doctor before using the heart rate monitor of the watch.
- The optical heart rate sensor will glow green. If you suffer from epilepsy or are sensitive to blinking light sources, please consult your physician before wearing this device
- The device tracks your daily activities through sensors. This data is intended to tell you about your daily activities such as steps, sleep, distance, heart rate, and calories, but may not be completely accurate.
- The device accessories, heart rate sensor, oxygen level monitor, and other relevant data is designed for fitness and not for medical purposes.
- They are not applicable to the diagnosis, or monitoring. treatment or prevention of any diseases or symptoms.
- The heart rate and blood pressure data are for reference only. We’re not responsible for any deviation in data.
- Avoid wearing the watch too tightly. Make sure you keep your skin dry – the area that comes in contact with the watch. If symptoms such as redness or swelling appear on your skin, immediately stop using the watch and consult the doctor.
THINGS TO KEEP IN MIND
-
Sync data everyday day to avoid data loss.
-
Water Resistance will not work for seawater, acidic and alkaline solutions, chemical reagents & other corrosive liquids. The damage or defects caused by misuse or improper use are not covered by the warranty
-
Sports modes support up to 6 hours of exercise at a time.
-
Avoid wearing the watch too tight in daily use. Keep the parts of the skin touching the watch dry.
-
Keep your arm still while measuring data for accurate measurement.
Disclaimer: This product is an electronic monitoring product and is not intended as a medical reference. -
We reserve the right to modify or improve any of the functions described in this manual without any prior notice.
-
At the same time, we hold the right to continuously update the product content:
CAUTION
- RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT SUBSTITUTE.
- DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
- Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is free.
- The owner of old appliances is responsible for bringing the appliances to these collection points or to similar collection points. With this little personal effort, you contribute to recycling valuable raw materials and treatment of toxic substances.
Read User Manual Online (PDF format)
Loading......