OneOdio OpenRock S Air Conduction Sport Earbuds User Manual

OneOdio OpenRock S Air Conduction Sport Earbuds

Packaging List

Overview

Power On/Power Of

Power on
Open the lid to automatically power on the earphones. For manual control, hold the touch control area for 3 seconds when the earphones are OFF.

Power off
Place the earphones back inside the charging case and close the lid to automatically power them off. For manual control, hold the touch control area for 5 seconds when the earphones are ON.

Bluetooth Pairing

First time use

1. Open the charging case, take out the earphones and remove the charging protective film.
2. Place the earphones back into the charging case and close the lid.
3. Wait 10 seconds, then open the charging case lid, the earphones will automatically turn on.
4. The LED indicator will flash white to signify pairing mode.
5. On your device, select “OpenRock S” from the list of available Bluetooth devices.
6. After pairing successfully, the white indicator of the earphones will remain ON for 1 second.
7. Take out the earphones for use.
   

Manual Bluetooth pairing (Pairing again)

1. Place the earphones inside the charging case and keep the case open.
2. Press and hold the button on the charging case for 5 seconds.
3. The indicator light on the charging case will flicker three times.
4. Choose “OpenRock S” from the Bluetooth list on the device to be paired.
5. After pairing successfully, the white indicator of the earphones will remain ON for 1 second.
6. Take out the earphones to use.
   

Controlling the Earphone

Hold both sides simultaneously for 2 seconds
Switch sound effects between Rock Mode Relax Mode (Not available during phone calls or music playback)

Battery Display

Earphone low battery reminder

When earphone battery has only 10 minutes of playback remaining,
the LED indicator will flash red twice every 5 minutes, and the earphone will play a voice message saying “Low Battery”.

Charging case battery display
The four white LED indicators on the charging case indicate the five battery levels: 0%, 25%, 50%, 75%, and 100%.

Charging Guidance

Charging the earphones

1. Place the earphones in the charging case. The earphones LED indicator will remain on for 2 seconds.
   

2. Close the lid to charge the earphones

Charging the charging case
Plug in the charging case with a USB Type-C charging cable to a 5V charger. The LED indicator on the case will flash during charging.

Restore Factory Settings

1. Place the earphones in the charging case. Keep the case open.
2. Press and hold the charging case button for 10 seconds.
3. The charging case LED indicator will flash twice from left to right.
4. Pairing settings have now been reset.

Specifications

Driver size: 16.2 mm
Frequency response range: 20 Hz – 20 kHz
Microphone: Single side 2×MEMS
Bluetooth version : 5.3
Bluetooth connection distance : 10 m
Battery life : 19 hours (earphone) 60 hours (including charging case)
Audio decoding: AAC, SBC
Rated input: 5 V 450 mA
Full charge duration: 1.5 hours
1 hour playback after charging for 5 minutes Weight: 12 g (single earphone) 132 g (complete set)
Waterproof grade: IPX5

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>