Ciarra 850 Smart Island Cooker Hood User Manual

850 Smart Island Cooker Hood

Ciarra 850
User Manual

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
****www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer
Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Safety Precautions

In order to minimize the potential for fire, electric shock, or harm to individuals, please adhere to the subsequent guidelines:

• Operate this appliance solely as intended by the manufacturer. If you have inquiries, reach out to the manufacturer using the address or phone number provided in the warranty.
• Before conducting any maintenance or cleaning on the unit, make sure to unplug or disconnect the cooker hood from its power source.
• This device is not designed for utilization by individuals (including children) with diminished physical, sensory, or mental capacities, or those lacking experience and knowledge—unless they are supervised or instructed on its use by a responsible person ensuring their safety.
• Qualified personnel must carry out installation and electrical wiring activities, following all relevant codes and standards, including those related to fire-resistant construction.
• Adequate air supply is essential for proper combustion and the expulsion of gases through the flue (chimney) of fuel-burning equipment to prevent reverse airflow.
• When working on walls or ceilings, exercise caution to avoid harming concealed electrical wiring and utilities while cutting or drilling.
• Ducted fans must be consistently vented to the external environment.
• Comply with local authorities’ regulations concerning the discharge of exhaust air.
• Ensure the proper grounding of this unit.
• If local regulations impose stricter installation or certification prerequisites, these take precedence over the ones mentioned in this document. The installer commits to adhering to these more stringent requirements at their own cost.
• Regularly clean the cooker hood. Prevent the build-up of grease on fans, filters, or within exhaust ducts.

Warning: Neglecting to properly install the screws or fixing device as directed by these instructions could lead to potential electrical dangers.
To minimize the possibility of harm to individuals in case of a grease fire on the range top, please take note of the following precautions:

1. Extinguish flames by placing a well-fitting lid, cookie sheet, or metal tray over them, then turning off the burner. Be cautious to avoid burns. If the flames persist, evacuate and contact the fire department immediately.
2. Avoid picking up the burning pan — You may be burned.
3. Avoid using water, including damp dishcloths or towels — This could result in a dangerous steam explosion.
4. Utilize an extinguisher only if:
   a) You possess a Class ABC extinguisher and are familiar with its operation.
   b) The fire is minor and contained to its point of origin.
   c) The fire department has been notified.
   d) You can combat the fire while having an exit route at your back.

Caution

• Intended solely for indoor usage.
• Designed exclusively for general ventilation purposes: Refrain from employing it to expel hazardous or explosive substances and vapors.
• To prevent motor bearing impairment, as well as the development of a noisy or imbalanced fan blade, ensure that drywall spray, construction dust, etc., are kept away from the cooker hood.
• Your hood’s motor incorporates a thermal overload feature that will automatically deactivate the motor if it becomes excessively heated. The motor will resume operation once it has cooled down. If the motor repeatedly shuts off and restarts, seek professional servicing for the hood.
• Always adhere to the ventilation requirements outlined by the manufacturer of your cooking equipment.
• To minimize the risk of fire and to effectively expel air, make sure to channel air outdoors — Do not discharge air into enclosed spaces within walls or ceilings, attics, crawl spaces, or garages.
• When installing, servicing, or cleaning the unit, it is advisable to wear safety glasses and gloves.
• Kindly refer to the specification label on the product for additional information and stipulations.

Specifications

Note: The manufacturer reserves the right to change any technological improvement or modification without prior notice.

Before Using the Cooker Hood

Caution: Prior to commencing the installation process, verify the presence and condition of all items. In case of any missing or damaged components, get in touch with the manufacturer. Adhere to all relevant codes and regulations. Employ a skilled technician to carry out the installation of the cooker hood. The installer is accountable for adhering to the installation clearances stipulated on the model/serial rating plate. The manufacturer disclaims any liability for inappropriate installation and will not assume responsibility for appliance warranties in instances where damage arises due to incorrect installation.

Packaging

| 6 × 40mm Screws
---|---
Expansion Bolt
Steel Cable
| 1:1 Installation Diagram
Installation Manual
| Hanging Plate
Decorative Plate
Cooker Hood Body
Carbon Filter (CBCF003)

Tools Required for Installation

| 1. Protective Gloves
---|---
2. Spirit Level Ruler
3. Measuring Tape
| 4. Double Sided or Normal Tape
5. Crosshead Screwdriver Set
6. Electric and 8mm drill

Preparations For Installation

Ventilation Mode
Recirculation Mode: By utilizing a carbon filter (mandatory), the recirculation process effectively filters and expels odors and smells through the upper vented opening, eliminating the need for an exhaust pipe. Don’t Connect to Power Yet
Refrain from connecting the product to the mains power supply before installation.

Installation

Installation of the Hood

1. Take off all protective poly film from the hood and/or its components.

2. It is advised to install at a height of 65 – 75cm above the cooktop for optimal extraction.
   a. Minimum height over a gas hob: 750mm.
   b.Minimum height over an electric hob: 650mm.

3. Presented below is the 1:1 hole drilling installation illustration

4. Adhering to the 1:1 installation diagram, drill four holes with an 8mm diameter each to fit the Hanging plate; fasten the bracket to the ceiling utilizing the provided Expansion bolt holes.
   Note: When dealing with a wooden ceiling, there is no necessity for hole drilling; instead, attach the hanging plate directly to the ceiling using four pieces of 6 × 40mm screws.

5. Thread the four steel cables through the cooker hood’s cable holder.

6. Pass the four steel cables and the power cord through the decorative plate.

7. Elevate the hood (with a minimum of two individuals), guide the four steel cables through the appropriate cable holder on the hanging plate. Modify the hood’s height to match the current setting, and the cable will be automatically secured by the cable holder. Note: The cables are adjustable only when pressure is applied to the cable holder tips.

8. Modify the height of the four steel cables and employ a Spirit Level Ruler to ensure the hood is positioned horizontally.

9. Attach the hood’s power cord.
   If a power connector is present on the ceiling, pass the power cord through the decorative plate and link the power cable to the ceiling’s power connector.
   If no power connector is available on the ceiling, connect the power cable directly to the power connector (there’s no need to pass the power cord through the decorative plate). Attention: Installation of the power cord must be undertaken by certified electricians. It’s crucial to prioritize personal safety to mitigate the risk of electric shock.

10. Slide the decorative plate upwards to align and secure it with the magnets on the hanging plate.

11. Tear off the tape from the air outlet.

12.  Test the functions by turning the LED lights on and off.

Installation of the Carbon Filter (Recirculation)

1. The carbon filter effectively captures odors.
   To install the carbon filter, the grease filter must be removed initially. Depress the lock and gently pull it downward.

2. Position the carbon filter within the unit and rotate it clockwise to secure it in position.

3. When it’s time to replace the carbon filter, simply rotate it in the counter-clockwise direction.

Note:

• Ensure the carbon filter is firmly locked into place.
• Keep in mind that the installation of the carbon filter will result in reduced suction capacity of the cooker hood.
• It’s recommended to replace the carbon filter every 2-4 months, varying based on usage conditions.

Operation of the Hood

Initiate the operation of your hood prior to commencing cooking to establish proper airflow within the kitchen.

Electronic Buttons

Follow these instructions to operate the hood:

Standby Mode
Upon plugging in the appliance, a buzzer will emit a sound, accompanied by all indicator lights briefly illuminating for 1 second before turning off. This action signifies the cooker hood’s entry into standby mode. The button indicator light will continue to flash intermittently. If there’s no interaction within 60 seconds, the hood will transition into sleep mode. To reactivate, simply press any button briefly.
While the cooker hood is in standby mode, it’s effortless to select the desired speed level (1, 2, or 3). Press and hold the corresponding speed level button for 2 seconds. If you wish to return to standby mode, press the same speed level button once more.
1 Low Speed Button
For nearly silent air ventilation or simmering with minimal smoke and steam.
2 Medium Speed Button
Designed for your daily cooking needs.
3 High Speed Button
Utilize the High-Speed setting for stir-frying or when cooking generates significant smoke and grease.
Booster Button
Immediately engage the highest suction power; transition to the third speed setting after 10 minutes.
Light Button
Press once to activate the LED light at level 1 brightness. Press a second time to activate the LED light at level 2 brightness, which is brighter. Press a third time to turn off the LED light.

Smart Life APP

Download and Installation the Smart Life App

1. To download and utilize this app, you’ll need an Android or iPhone device.
2. To download and install the app, search for “Smart Life” on the Google Play Store for Android or the iOS App Store for iPhones.

| |
---|---|---
https://apps.apple.com/app/smart-life-smart-living/id1115101477| https://play.google.com/store/apps/details?id=com.tuya.smartlife| https://youtu.be/3XXioiB4MWQ

Pairing the Cooker Hood with the Smart Life App

1. Upon your initial login to the Smart Life App, you’ll be prompted to create a new account. Follow the app’s instructions to complete the registration process.
2. If you possess an existing account, you can use it to log in.
3. Once logged in, proceed with the cooker hood connection process by following the provided steps. (The operational steps remain consistent for both Android and iOS systems.)

1. Open the smart life app and click add device.| 2. Choose kitchen appliances from the menubar on the left.| 3. Choose kitchen hood.

4. Connect your home WiFi and enter the password, then click Confirm.| 5. Whenever you enter this interface choose EZ Mode located in the top right corner.| 6. Hold down the “Light” button for 5 seconds. You will hear a beeping sound, and all button light will begin to flash, indicating entry into Wi-Fi paring mode.

7. Click on “Confirm the indicator is blinking
rapidly” and click on “Next”| 8. Adding device…| 9. When you see this interface it means you have successfully connected your device

10. Click on “Me” and select “Message Center”.| 11. You can create a home or join a home in this area. Click on “My family management”.| 12. Select “Add member” and share to members, after member successfully join the same
family, they can remotely control “Cooker Hood” through Wi-Fi.

Function of UV Lamp

Caution:

1. The UV lamp should not be touched with bare hands and cannot be removed.
2. If the front panel is open, the UV lamp cannot be activated. This device includes a UV emitter. Do not directly gaze into the light to avoid potential eye damage.
3. The UV lamp might experience a slow start in low-temperature conditions. Please exercise patience. It will resume normal operation once the temperature increases.

For optimal results, it’s advised to activate the UV lamp when the cooker hood is in use, particularly when employing the activated carbon internal circulation mode. In this operational mode, initiate the UV lamp by simultaneously holding down the [3] and [B] buttons. The indicator light for the lamp button will begin flashing. To deactivate the UV lamp, press and hold the [3] and [B] buttons together again. The indicator light for the lamp button will cease flashing.

Operation Interface

On and Off Button
Light Button
Press the button once to switch on the lights while they are off. Press the same button once more to turn off the lights.
UV Light Button
If the lights are not illuminated, pressing the button once will activate them. To deactivate the lights, press the button again.
Fan Speed Button
You have the ability to control the respective settings of 1-2-3-P on the cooker hood.
Quick Delay Settings
While the cooker hood is operational, you can utilize the delay function to set a timer. Pressing this button will halt the cooker hood’s operation after 5 minutes.

Cleaning and Maintenance

Ensuring the Cooker Hood is appropriately maintained will guarantee its optimal  performance. Prior to cleaning the unit, kindly disconnect or unplug the cooker hoodfrom the power source.
Grease Filter
Regularly clean the grease filters. They can be washed in a dishwasher using high temperature settings without the need for any detergent.
Carbon Filter
Replace the carbon filter every 2-4 months, adjusting based on usage conditions. If your cooking methods, like stir frying, produce substantial grease, consider more frequent replacements. These filters are non-washable and not reusable. Consult the installation
instructions provided with the carbon filter for guidance.

Stainless Steel Cleaning

Do:

• Routinely cleanse it using a cloth or rag dampened with warm water and gentle soap or liquid dish detergent.
• Alternatively, a dedicated stainless steel cleaner designed for household use can also be applied.

Don’t:

• Utilize steel or stainless-steel wool, as well as other scrapers, to eliminate stubborn dirt.
• Avoid utilizing harsh or abrasive cleansers.
• Prevent plaster dust or any other construction debris from coming into contact with the hood. During construction or renovation, shield the cooker hood to prevent dust from adhering to the stainless-steel surface.

Avoid when choosing a detergent:

• Cleaners containing bleach can cause harm to stainless steel.
• Products containing chloride, fluoride, iodide, or bromide can lead to rapid surface deterioration.
• Combustible cleaning agents like acetone, alcohol, ether, benzol, etc., are highly explosive and should be kept well away from ranges.

Painted Finish Cleaning
Only use warm water and gentle detergent for cleaning. If any discoloration appears, apply a finishing polish like automotive polish. (AVOID using rough abrasive or porcelain cleaners.)
LED Replacement
Rectangle LED Lamp

Caution: Prior to cleaning, repairing, or replacing accessories, ensure to deactivate the power to prevent potential risks of electric shock, harm to individuals, and even threats to life safety.

1. Begin by turning off the hood and unplugging the power outlet. Take out the grease filter to prepare for the LED lamp replacement.
2. Employ your hand to push out the LED lamp holder from the cabinet, or carefully use a screwdriver to lift the edges of the LED lamp. Extract the slotted LED lamp along with its wire
3. Open the power protection cover, disconnect the plug, and install the appropriate model of LED lamp.
4. After restoring power, assess the operational status of all blower and lighting functions to ensure they are functioning correctly. Insert the new LED light into the light socket, ensuring alignment with the grooves on the lighting panel. Gently push the LED light until it sits flush with the light panel.
5. Then, reattach the grease filter, completing the process.

Troubleshooting

Problem: Extractor hood fails to activate
Possible Cause:

1. Lack of electrical power

Solution:

1. Ensure that the range hood is connected to a functional power outlet. If it’s not operational, consider testing the outlet with a different device

Problem: The performance of my range hood is subpar
Possible Cause:

1. Insufficient ventilation
2. Insufficient proximity between the range hood and cooktop
3. Before usage, verify the removal of the tape securing the damper flaps at the vent hole
4. Grease filters obstructed due to accumulated grease
5. Carbon filters obstructed due to accumulated grease
6. Motor operates, but no extraction occurs

Solution:

1. Verify adequate kitchen ventilation to facilitate fresh air circulation
2. For optimal extraction, maintain a distance of 65-75cm above the cooktop
3. Release the damper by removing the tape
4. Clean or replace the grease filters as needed
5. Install new carbon filters
6. Kindly get in touch with CIARRA’s Customer Care Service for assistance

Problem: My range hood is noisy
Possible Cause:

1. Inspect the interior of the range hood for any loose debris and eliminate it
2. If the noise originates from the motor, kindly reach out to our Customer Care Service

Solution:
Kindly get in touch with CIARRA’s Customer Care Service for assistance
Problem: Lights are not working
Possible Cause:

1. The light is in a damaged condition
2. The terminal of the light wire is not securely connected

Solution:

1. Swap with a new LED lamp: take out the grease filters, access the area behind the control panel, and find the wire with a clip situated behind the light housing.
2. Reestablish the connection by resetting it.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity
** This equipment is in compliance with the essential requirements and other relevant provisions of EU directives.
WEEE
** Waste electrical products should not be disposed with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
The symbol on the product indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Disposal must be carried out in accordance with local environmental regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• alza.de
• alza.hu
• alza.sk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>