GreenU TXQ F3 4G PoC Radio User Manual
- June 13, 2024
- GreenU
Table of Contents
GreenU TXQ F3 4G PoC Radio
Product Information
- Model No.: TXQ F3
- Operating System: Android 10
- Dimension: 11958.425.5mm
- Weight: 290g
- Material : Plastic
- Color : Black
- Languages : Multi-language
Specifications
- Display : 2.4 inch MIPI QVGA touch screen, 320*240px
- Processor : SL8541E Cortex A53 quad core, 1.4GHz; GPU: Mali-820
- RAM : 1GB RAM
- ROM : 8GB ROM, support Micro SD card up to 64GB maximally
- Camera : Front camera 2MP + Rear camera 5MP AF (infrared night vision camera optional)
- Battery : Removable 5300mAh Li-Po battery, support 10W quick charge
- Speaker : 36, 2W loudspeaker
- Buttons : PTT button, SOS button, strobe light button, custom buttons*2
- Strobe light : Optional
- Network & Connectivity
- 2G : GSM B2/B3/B5/B8 Bands
- 3G : WCDMA B1/B2/B4/B5/B8 Bands
- 4G : LTE B1/2/3/4/5/7/8/34/38/39/40/41/28A/28B Bands
- Wi-Fi : IEEE 802.11 b/g/n
- BT : V4.2
- NFC : Optional
- GNSS : Support GPS/BDS/GLONASS
- I/O Interfaces: Micro SIM card slot, TF card slot, USB Type-C
- Features : PoC function, SOS function
- Reliability : Waterproof (IP54), Temperature range: -20°C to +60°C
- Accessories : Charger, USB cable, Belt Clip, Dock charger (Optional)
Product Usage Instructions
- Adjusting the volume: You can adjust the volume through the menu (Settings > Volume), or you can adjust the volume of the earpiece with the up and down function keys on the side.
- Shutdown: In standby mode, press and hold the On/Off button on the side of the intercom. After the screen pops up the shutdown prompt box, press to shutdown.
- Camera: After entering, you can take pictures and video functions. You can also set the picture resolution, timed photos, grid, and other functions.
- Intercom
1. After turning on the phone, enter the intercom application.
2. Log in to your account.
3. Press and hold the POC intercom key to intercom.
4. To ensure the best reception volume, please keep the distance between the microphone and mouth 2.5-5cm when transmitting.
- Charging: Charging without the battery installed may cause damage to the phone.
- Waste batteries: Waste batteries are collected centrally and are not allowed to be lost.
- Waterproof: Make sure to press the rubber plug into place, tighten the screws, and turn off the battery switch to prevent water from entering the walkie-talkie.
Warning
- Do not expose the device to extreme temperatures.
- Use only accessories that are recommended by the manufacturer.
Introduction
This device is a rugged smartphone designed for working in challenging environments such as construction sites, industrial facilities, and outdoor activities. It comes with 2.4-inch touch screen, android OS, and high-capacity battery that provides long hours of uninterrupted usage.
Specifications
BASIC INFO
Model No.| TXQ F3
Operating system| Android 10
Dimension| 11958.425.5mm
Weight| 290g
Material| Plastic
Color| Black
Languages| Multi-language
HARDWARE
Display| 2.4 inch MIPI QVGA touch screen, 320240px
---|---
Processor| SL8541E Cortex A53 quad core, 1.4GHz; GPU: Mali-820
RAM| 1GB RAM
ROM| 8GB ROM, support Micro SD card up to 64GB maximally
Camera| Front camera 2MP + Rear camera 5MP AF (infrared night vision camera
optional)
Battery| Removable 5300mAh Li-Po battery, support 10W quick charge
Speaker| Φ36, 2W loudspeaker
Buttons| PTT button, SOS button, strobe light button, custom buttons2
Strobe light| Optional
NETWORK & CONNECTIVITY
Bands
| 2G : GSM B2/B3/B5/B8
3G: WCDMA B1/B2/B4/B5/B8
4G: LTE B1/2/3/4/5/7/8/34/38/39/40/41/28A/28B
Wi-Fi| IEEE 802.11 b/g/n
BT| V4.2
NFC| Optional
GNSS| Support GPS/BDS/GLONASS
I/O INTERFACES
Micro SIM card slot| 2
TF card slot| 1
USB Type-C| 1
FEATURES
PoC function| Support
SOS function| Support
RELIABILITY
Waterproof| IP54
Temperature range| Operating: -20℃~+60℃
ACCESSORIES
Charger| 1
USB cable| 1
Belt Clip| 1
Dock charger| Optional
Schematic diagram
- Torch key
- Photo key
- Video key
- USB/headphone jack
- Indicator light
- Home button
- Dial key
- Blinking light switch 9 Microphone
- Front camera
- Touch Screen
- Back key
- Power key
- Speaker
- SOS key
- Flash light
- Poc key
- Volume +
- Volume –
- Flash
- Back Camera
- Back clip
- Battery + back cover
Description of common functions
Start up
Press and hold the On/Off key to turn on the intercom, the background light
will be on and the power-on animation will be displayed.
Note: If the intercom searches the authorized network or mobile network, the network signal strength will be displayed on the screen; if the intercom does not search the authorized network or mobile network, the screen will show the WIFI question mark or SIM card is not displayed, at this time the intercom will not be able to carry out normal intercom function.
Adjusting the volume
You can adjust the volume through the menu (Settings volume), or you can
adjust the volume of the earpiece with the up and down function keys on the
side.
Shutdown
In standby mode, press and hold the On/Off button on the side of the intercom,
and after the screen pops up the shutdown prompt box, press to shutdown.
Camera
After entering, you can take pictures, video functions, but also set the
picture resolution, timed photos, grid and other functions。
Intercom
- After turning on the phone, enter the intercom application, log in to your account and press and hold the POC intercom key to intercom.
- To ensure the best reception volume, please keep the distance between microphone and mouth 2.5-5cm when transmitting
Care and Maintenance
- New battery may not be fully charged, we recommend that you always fully charge the battery before use.
- Please keep the battery away from fire and do not expose it to sunlight, as high temperature can damage the battery and lead to dangerous situations.
- Generally, users are advised not to charge the battery when the ambient temperature exceeds 45℃ or below -10℃.
- The response speed of LCD slows down at low temperature, which is normal and does not affect the performance of the phone, please feel free to use it.
- The display is made of glass, rough use or dropping can cause the display to break.
- Charging without the battery installed may cause damage to the phone.
- Waste batteries are collected centrally and are not allowed to be lost.
- Make sure to press the rubber plug into place, tighten the screws, and turn off the battery switch to prevent water from entering the walkie-talkie.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>