PRINCESS 303010.01.001 Induction Plate Instruction Manual

: June 13, 2024
: Princess

Table of Contents

PRINCESS 303010.01.001 Induction Plate Instruction Manual
PRINCESS 303010.01.001 Induction Plate
PARTS DESCRIPTION
Note: these are touchscreen buttons
Description of heating principle of the induction cooker
Suitable pan ware
Unsuitable pan ware
USE
FAILURE CODES
CLEANING AND MAINTENANCE
ENVIRONMENT
Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PRINCESS 303010.01.001 Induction Plate Instruction Manual

PRINCESS 303010.01.001 Induction Plate

SAFETY

By ignoring the safety instructions the manufacturer cannot be held responsible for the
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a
Never move the appliance by pulling the cord and make sure the cord cannot become
The appliance must be placed on a stable, level
The user must not leave the appliance unattended while it is connected to the
This appliance is only to be used for household purposes and only for the purpose it is made
This appliance shall not be used by children aged less than 8 years. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play
with the appliance. Keep the appliance and its
cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be made by children unless older than 8 and supervised.
WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of an electric shock
Surface is liable to get hot during
The appliance is not intended to be operated by means of an external timer or a separate remote-control
The temperature of accessible surfaces may be high when the appliance is
Keep the appliance and its cord out of reach of children less than 8
To protect yourself against an electric shock, do not immerse the cord, plug or appliance in the water or any other

This product complies with conformity requirements of the applicable European regulations or directives.

The Eurasian Conformity mark (ЕАС) is a certification mark to indicate products that conform to all technical regulations of the Eurasian Customs Union

The Green Dot is the registered trademark of Der Grüne Punkt
– Duales System Deutschland GmbH and is protected as a trademark worldwide. The logo may only be used by customers of DSD GmbH holding a valid trademark usage contract or by engaged waste management companies within the Federal Republic of Germany. This also applies to reproduction of the logo by third parties in a dictionary, an encyclopaedia or an electronic database containing a reference manual.

The universal recycling symbol, logo, or icon is an internationally recognized symbol used to designate recyclable materials. The
recycling symbol is in the public domain and is not a trademark.

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local Authority or local store for recycling advice.

The product and packaging materials are recyclable, subject to extended manufacturer responsibility. Dispose it separately, following the illustrated packaging symbols, for better waste treatment. The Triman logo is valid in France only.

PARTS DESCRIPTION

Hot plate
Timer indication light
Lock indication light
Power indicator
Temperature indication light
Lock button
On/Off button
Control wheel
Timer button
Function button

Note: these are touchscreen buttons

BEFORE THE FIRST USE

Take the appliance and accessories out the Remove the stickers, protective foil or plastic from the device.
Before using your appliance for the first time, wipe off all removable parts with a damp Never use abrasive products.
Put the power cable into the (Note: Make sure thevoltage which is indicated on the device matches the local voltage before connecting the device. Voltage 220V-240V~ 50/60Hz).

Description of heating principle of the induction cooker

The induction cooking plate is a kind of kitchen electrical appliance which utilizing the principle of electromagnetic induction to convert electrical energy into thermal energy. Inside the cooking plate the rectifier converts the DC voltage into 20-40 KHz high-frequency When the high-frequency current flows through the inductance coil, a fast-changing magnetic field is generated. As the

magnetic lines of force in the field pass through the bottom of a metal pan, the ware itself heats rapidly and the food in the pan will be heated up. As induction cooker features convenient use, no smoke, no open flame, no exhaust gas and easy cleaning, it has been regarded as an environment-friendly and fashionable kitchen appliance, so it is increasingly in the good graces of consumers.

Suitable pan ware

Note: check before you start coocking whether the pan you use is suitable for induction
Materials: iron, stainless steel, iron cast and heat-resistant glassware with magnetic inductive
Form: pan with flat round bottom (the diameter of the flat bottom shall be larger than and not bigger than 26cm.)

Unsuitable pan ware

Materials: Nonferrous metal, ceramics, glass, pan with bottom as copper or aluminum (multi-layer metal pan).
Form: Pan with very uneven bottom, pan with bottom diameter less than 12

USE

Connecting to power supply: Insert the power plug into the power socket of AC230V/10A. When you hear a “Beep” from the buzzer and the display show “OFF“, it means the power is connected and the appliance is in the standby
Placement of the pan: place the pan and put food to be cooked in the pan directly and then put the loaded pan at the center position of the heating panel of the
Cooking based on wattage: press the ON/OFF switch to turn on the appliance, the display will show “on” then push the “function” button, the power indicator will illuminate, now the electromagnetic oven is in the power heating status. The display will show “ 1600”, use the wheel to adjust from 200W to 1800W, now you can push the timer button, the timer indication light will illuminate and the display will show 0:00, use the wheel to adjust the time
Cooking based on temperature: press the ON/OFF switch to turn on the appliance, the display will show “on” then push the “function” button twice the power indicator will illuminate, now cooker is in the temperature heating The display will show “240” , use the wheel to adjust from

indication light will illuminate and the display will show 0:00, use the wheel to adjust the time setting.

When ready, the display of the timer will shut down, it means heating has been stopped. But the cooling fan will keep running for 1 minute to cool down the appliance. The cooling fan would be stopped automatically after 1 minute. If you want to unplug the power plug, you have to do this after the cooling fan
LOCK function , press lock function button to lock the control To unlock the control panel touch the lock button for 5 seconds.
Note: the appliance may make some noise during cooling, this is
Note: the cooking surface remains hot for some time after

FAILURE CODES

Problem: E0 no proper pan found
Solution: ensure the cookware is made of steel (or has a bottom suitable for an induction cooking plate), and the diameter of bottom must larger than
Problem: E1 Inner temperature sensor failed
Solution: contact qualified person for
Problem: E2 sensor for panel failed
Solution: contact qualified person for
Problem: E3 the voltage of power source over than 270V
Solution: you have to stop the appliance until the power source is stable (standard voltage should be 230V).
Problem: E4 the voltage of power source lower than 140V
Solution: you have to stop the appliance until the power source is stable (standard voltage should be 230V).
Problem: E5 panel overheat,
Solution: (if the pan may be dry) stop the appliance until it’s cooled down, then you can restart it
Problem: E6 Inner overheat-protection circuit stops running
Solution: to cool down the machine, and ensure the air intake or ventilation port is not If such issue occur again, contact qualified person for repair.

CLEANING AND MAINTENANCE

Before cleaning, unplug the appliance and wait for the appliance to cool
Wipe the outside with only a slightly moistened cloth ensuring that no moisture, oil or grease enters the cooling
Clean the appliance with a damp Never use harsh and abrasive cleaners, scouring pad or steel wool, which damages the appliance.
Never immerse the electrical appliance in water or any other The appliance is not dishwasher proof.

ENVIRONMENT

This appliance should not be put into the domestic garbage at the end of its durability, but must be offered at a central point for the recycling of electric and electronic domestic appliances. This symbol on the appliance, instruction manual and packaging puts your attention to this important issue. The materials used in this appliance can be recycled. By recycling of used domestic appliances you contribute an important push to the protection of our environment. Ask your local authorities for information regarding the point of recollection.