Shelly Blu Button1 Bluetooth Operated Action and Scenes Activation Button User Guide
- June 13, 2024
- Shelly
Table of Contents
Shelly Blu Button1 Bluetooth Operated Action and Scenes Activation Button
Product Information
The ShellyBLU Button1 is a device that allows for remote activation of the device buzzer for 30 seconds. It features beacon mode where it emits beacons every 8 seconds for presence detection. The device can be used standalone or with various home automation platforms and protocols. It is powered by a 3V CR2032 or compatible battery.
Product Usage Instructions
Inserting the battery:
- Open the Device’s back cover using your thumbnail, screwdriver, or another flat object as shown in Fig. 2.
- Slide in the supplied battery as shown in Fig. 2. Pay attention to the battery polarity.
- Replace the back cover by pressing it to the Device until you hear a clicking sound.
Using ShellyBLU Button1:
If you choose to use the Device with the Shelly Cloud mobile application
and Shelly Cloud service, instructions on how to connect the Device to the
Cloud and control it through the ShellyApp can be found in the App Guide. The
Shelly mobile application and Shelly Cloud service are not conditions for the
Device to function properly.
Replacing the battery:
- Open the back cover as shown in Fig. 2.
- Extract the exhausted battery using your thumbnail, screwdriver, or another flat object as shown in fig. 3.
- Slide in a new 3V CR2032 or compatible battery as shown in Fig. 2. Pay attention to the battery polarity.
- Replace the back cover by pressing it to the Device until you hear a clicking sound as shown in Fig. 2.
CAUTION: Keep the device away from liquids and moisture. Do not use it if the Device has been damaged. Do not attempt to service or repair the Device yourself. The Device may control electric circuits and appliances, so proceed with caution to avoid malfunction or danger.
Read before use
This document contains important technical and safety information about the
device, its safety use, and installation.
CAUTION! Before beginning the installation, please read carefully and entirely this guide carefully and any other documents accompanying the device. Failure to follow the installation procedures could lead to malfunction, danger to your health and life, violation of law, or refusal of legal and/or commercial guarantee (if any). Allterco Robotics EOOD is not responsible for any loss or damage in case of incorrect installation or improper operation of this device due to failure to follow the user and safety instructions in this guide. Shelly® devices are delivered with factory-installed firmware. If firmware updates are necessary to keep the devices in conformity, including security updates, Allterco Robotics EOOD will provide the updates free of charge through the device Embedded Web Interface or the Shelly mobile application, where the information about the current firmware version is available. The choice to install or not the device firmware updates is the user’s sole responsibility. Allterco Robotics EOOD shall not be liable for any lack of conformity of the device caused by the ailure of the user to install the provided updates promptly.
Product Introduction
ShellyBLU Button1 (the Device) is a Bluetooth button, which helps you easily
activate and deactivate any device or scene with just a click. (fig.1
)
- A : Button
- B : LED indication ring
- C : Key ring bracket
- D : Buzzer
- E : Back cover
Installation Instructions
- CAUTION! Keep the device away from liquids and moisture. The device shouldn’t be used in places with high humidity.
- CAUTION! Do not use it if the Device has been damaged!
- CAUTION! Do not attempt to service or repair the Device yourself!
- CAUTION! The Device may be connected wirelessly and may control electric circuits and appliances. Proceed with caution! Irresponsible use of the Device may lead to malfunction, danger to your life, or violation of the law.
Inserting the battery
- Open the Device’s back cover using your thumbnail, screwdriver, or another flat object as shown in Fig. 2.
- Slide in the supplied battery as shown in Fig. 2.
- CAUTION! Pay attention to the battery polarity!
- Replace the back cover by pressing it to the Device as shown in fig. 2 until you hear a clicking sound.
Using ShellyBLU Button1
Pressing the button will cause the Device to start transmitting signals for
one second in compliance with the BT Home format. Learn more at
https://bthome.io. ShellyBLU Button1 has an advanced
security feature and supports encrypted mode. ShellyBLU Button 1 supports
multi-click – single, double, triple, and long press. The LED indication will
emit the same number of flashes as the button presses and the buzzer – the
corresponding number of beeps. To pair ShellyBLU Button1 with another
Bluetooth device press and hold the Device button for 10 sec. The device will
await connection for the next one minute. The available Bluetooth
characteristics are described in the official Shelly API documentation at:
https://shelly.link/ble ShellyBLU Button1 features
beacon mode. If enabled, the Device will emit beacons every 8 seconds and can
be discovered or used for
If you choose to use the Device with the ShellyCloud mobile application and Shelly Cloud service, instructions on how to connect the Device to the Cloud and control it through the Shelly App can be found in the “App Guide”.The Shelly mobile application and Shelly Cloud service are not conditions for the Device to to function properly. This Device can be used standalone or with various other home automation platforms and protocols.
Replacing the battery
-
Open the back cover as shown in Fig. 2.
-
Extract the exhausted battery using your thumbnail, screwdriver, or another flat object. as shown in fig. 3.
-
Slide in a new battery as shown in fig. 2
CAUTION! Use only 3 V CR2032 or a compatible battery! Pay attention to the battery polarity! -
Replace the back cover by pressing it to the Device until you hear a clicking sound as shown in Fig. 2.
Specifications
- Dimensions: 36x36x6 mm / 1.44х1.44х0.25 in
- Weight with battery: 9 g / 0.3 oz
- Working temperature: -20°C to 40°C
- humidity 30 % to 70 % RH
- Power supply: 1x 3 V CR2032 battery (included)
- Battery life: up to 2 years
- Multi-click support: Up to 4 possible actions
- Radio protocol: Bluetooth
- RF band: 2400 – 2483.5 MHz
- Max. RF power: < 4 dBm
- Beacon function: Yes
- Encryption: AES encryption (CCM mode)
- Operational range (depending on local conditions):
- up to 30 m outdoors
- up to 10 m indoors
Declaration of conformity
Hereby, Allterco Robotics EOOD declares that the radio equipment type
ShellyBLU Button1 is in compliance with Directive 2014/53/EU, 2014/35/EU,
2014/30/EU, 2011/65/EU. The full text of the EU Declaration of Conformity is
available at the following internet address: https://shelly.link/blu-button-
1_DoC
- Manufacturer : Allterco Robotics EOOD
- Address : 103 Cherni Vrah Blvd., 1407 Sofia, Bulgaria
- Tel.: +359 2 988 7435
- E-mail: support@shelly.cloud
- Official website : https://www.shelly.cloud
Changes in the contact information data are published by the Manufacturer on the official website. https://www.shelly.cloud
All rights to the trademark Shelly® and other intellectual rights associated with this Device belong to Allterco Robotics EOOD.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>