connect IT 2020-04-23 Wall Mount For Flat Screen User Manual
- June 13, 2024
- CONNECT IT
Table of Contents
connect IT 2020-04-23 Wall Mount For Flat Screen User Manual
Before putting this product into operation, please read carefully all the
instructions, even if you are already familiar with using similar products.
Use the product only as described in this manual, Keep this manual in case you
need it for future reference. The electronic version of this user manual can
be downloaded on the website www.connectit-europe.com
We recommend keeping the original packaging of the product, invoice and
warranty certificate at least for the time the warranty is valid. When
shipping the product we recommend using the original packaging that the
product was delivered in that will provide the best protection for it from
being damaged during transport
Warning
- The wall or the surface used for securing the mount must have sufficient strength and maximum load to secure the weight of the mount the screen and other accessories
- When installing the screen, use an assistance of another person.
- During the installation, tighten the screws properly, but make sure not to strip the threads. That could damage the installed screen or significantly decrease the maximum load of the mount.
- This wall mount is designed for indoor use only. Outdoor use may cause harm, damage to the mount or the installed screen.
- Check the stability and safety of the mount at least every three months
Specifications
- Colour: black
- Quick and easy assembly
- Screws and concrete anchors included
- Fits most 32-70″ flat panels
- Max load capacity: 35 kg
- VESA compliant:
100 100
200 x 100
200 200
300 100
300 x 200 300 300
400 100
400 200
400 x 300
400 400
500 100
500 x 200
500 300
500 x 400
600 x 100
600 200
600 300
600 400
CMH-7600-BK
Package contents
Assembly
1a. CONCRETE WALL
2a. CONCRETE WALL
1b. WOOD STUD
2b. WOOD STUD
3a. If our screws are too long for your TV, please prepare some shorter
screws by yourself.
Square Washer (A6)
3b. If our screws are too long for your TV, please prepare some shorter
screws by yourself
Square Washer (A6)
Tighten or loose the screws on the wall plate to keep level.
Tighten or loose the screw nuts on the wall plate to adjust the tilting angle.
MANUFACTURER
HERSTELLER
VÝROBCE
VÝROBCA
IT TRADE, a.s.
Brtnická 1486/2
101 00 Praha 10 – Michle
Czech Republic
tel.: +420 734 777 444
service@connectit-europe.com
www.connectit-europe.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>