idearge M327 Head Talk GSM Wifi Based Radios User Manual

**idearge M327 Head Talk GSM Wifi Based Radios

**

Dear Customer,

Thank you for preferring PlusPTT products. Manufactured with the highest quality and the cutting-edge technology, our product aims to provide you the optimal efficiency. Please read this manual before using this product and keep it to serve you as further reference. This Manual has been drawn up for informational purposes only. The entire information presented herein is subject to amendments without further notice. Idearge is not responsible for any amendments, direct or indirect damages arising from or related to the use of this manual.
Idearge, Idearge logo, PlusPTT and PlusPTT logo are the trademarks of IDE Inovasyon Arge Yatırım Danışmanlık San. Tic. A.Ş.

SAFETY AND REGULATORY INFORMATION

 Do not open the device without authorization or alter any of its components. Interventions made without proper technical training violate the Push-to-Talk device’s warranty and run the risk of doing irreversible harm.
 Please use within the specified voltage range (12V-24V).
 Do not operate the product in a location containing fuels, chemicals, explosive atmospheres and other flammable or explosive materials.

SAFETY AND REGULATORY INFORMATION

 Do not use the device in any hazardous areas such as gas, dust, steam, etc.
 Please turn off the device while refueling.
 Avoid exposing the device to sunlight for a long time.
 Avoid leaving the device in extremely dusty or humid areas for a long time.
 Do not place the device near heat sources or fire sources such as electric heaters, microwave ovens, ovens, water heaters, stoves, candles, or other places that may generate high temperatures.
 Do not adjust the product during driving and pay attention to road conditions.
 Do not use any unapproved, damaged accessories or incompatible power source, which may cause fire, explosion or other hazards.
 Please use only approved accessories. Using other unproven accessories and causing accidental damage will void the warranty.
 Before cleaning and maintaining the device: please stop working, turn it off and disconnect all connections from other equipment.
 When cleaning the dust, please use a soft brush and neutral detergent (do not use strong abrasive chemicals) to wipe it.
 Please keep the equipment and accessories dry.
 Do not use microwave oven, hair dryer or other heating device to dry the device.

Box Content

• 1x PlusPTT M327 Mobile POC Radio
• 1x DC Power Cable
• 1x LTE Antenna
• 1x GPS Antenna
• 1x Handset
• 1x Touch Screen Pen
• 1x Bracket
• 1x Screwdriver
• 1x Fixing Screw Pack
• 1x User Manual

PRODUCT OVERVIEW

1| Volume Knob/Confirm Button| Rotate the Volume Control Knob clockwise or counterc- lockwise, press to confirm.
---|---|---
2| LED Indicator|
3| LCD Display|
4| SOS Button|
5| Logo|
6| Scroll Up Button| Moves cursor up
7| Scroll Down Button| Moves cursor down
8| Bracket Fixing Screw|
9| Return Button| Return to previous menu
10| Bracket|
11| P4 Programmable Button| Define shortcut keys
12| P3 Programmable Button| Dial Button
13| P2 Programmable Button| Channel + Button
14| P1 Programmable Button| Channel – Button
15| Handset Interface|
16| Screen on/off| Short press: screen on/off Long press: restart
17| DC Power Connector|
18| USB & Earpiece Connectors|
19| LTE Antenna Connector|
20| GPS Antenna Connector|
21| SIM&TF Card Slots|
22| Power Button|

INSTALLATION

1. Insert SIM Card Insert SIM card to the the SIM card slot, close the cover and tighten the screws.
   

2. Attaching the Bracket Rotate clockwise and tighten it. Rotate counterclockwise to remove it.
   

3. **Plug the DC Power

   **

4. Attach the Antennas
   
   

5. Attach the Handset
   

BUTTON FUNCTIONS

1. Turning the Device On/Off: The Device is switched on by pressing the Power Button. The PlusPTT application launches itself and joins the specified channel. The channel’s users are listed. Pressing the Power Button again will turn the device off.
2. Adjusting the sound: The sound is adjusted by pressing the rotating the Volume Knob.
3. Announce to Channel: After the device is turned on and the users in the channel are listed, the announcement is made by pressing the PTT Button.
4. Private Single Call – Private Group Call: Double-clicking on the touch screen or pressing the Confirm Button selects users. By pressing the Dial Key, you can initiate a private call. To end the conversation, press the Return Key.
5. Switch Channel: P1 and P2 Buttons are used to switch channels.
6. Emergency Alarm: SOS Button is pressed to send an SOS signal to the Dispatch Console and other users in the same channel.

 RECYCLING OF THE DEVICE

This symbol on the product or its packaging indicates that the product is required not be handled as a domestic waste. This product is manufactured by using high quality parts and materials that can be recycled and reused. Therefore, do not dispose the product with the domestic or other waste at the end of its service life. Dispose it at a dedicated waste collection point for the recycle of electrical or electronic equipment. Consult your local government on these collection points. Please help preserving the environment and natural resources by recycling used products.

 PACKAGING INFORMATION

The packaging of the product is produced from recyclable materials in accordance with our National Legislation. Dispose of packaging waste together with domestic or other waste, at packaging collection points designated by the local authority.

MANUFACTURER/AUTHORIZED SERVICE
İDE İNOVASYON ARGE YATIRIM DANIŞMANLIK SANAYİ TİC A.Ş.
Üniversiteler Mah. 1596. Cad. Hacettepe Teknokent No:6A/34
Beytepe Çankaya ANKARA
Tel: +90 312 227 0128
Web: https://idearge.com.tr, https://plusptt.app

References

• İdearge Prolupus – Anasayfa
• PlusPTT Baş Konuş GSM/Wifi tabanlı telsizler

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>