LUCIDE 5411212451200 MALOTO LED Bulb Vintage Bulb Glass Amber Filament Bulb Instruction Manual

June 13, 2024
LUCIDE

LUCIDE-LOGO

LUCIDE 5411212451200 MALOTO LED Bulb Vintage Bulb Glass Amber Filament

Bulb

LUCIDE-5411212451200-MALOTO-LED-Bulb-Vintage-Bulb-Glass-Amber-Filament-Bulb-
PRODUCT

Product Information

  • Brand: Lucide
  • Product Name: MALOTO
  • Item Number: 45386/30/62
  • EAN Code: 5411212451200
  • Dimensions: 30 cm x 30 cm x 150 cm (LxWxH)
  • Minimum Height : 50 cm
  • Maximum Height: 150 cm
  • Main Material: Glass
  • Ceiling Rose Material: Metal
  • Color : Amber and Matt Gold/Brass
  • Style: Retro
  • Shape: Globe
  • Weight: 1.65 kg
  • Dimmable : Yes – Light Direction: Around (Diffuse)
  • Adjustable in Height: Adjustable In Height (Before Installation)
  • Directional: Not Directional – Cable: Yes, Cable On Product
  • Cable Length: 135 cm – Sensor: Without Sensor
  • Control: Light Switch Control
  • Power Supply: Adapter/Power Grid
  • IP-Class: 20
  • Electric Class: 1
  • Number of Light Sources: 1
  • Lamp Socket: E27
  • Maximum Wattage: 40 W
  • Power Requirements: 220-240 V~50 Hz
  • Warranty: 2 Years

Product Usage Instructions

Safety Precautions:

  • This product is suitable for indoor use only, excluding the bathroom unless a higher IP rating allows it to be used in the bathroom.
  • The product must be collected for reuse and recycling in accordance with legislation.
  • Class I product: The grounding wire (green-yellow) must be connected to the mass connection.
  • Class III product: Suitable for lower power voltage and should not be connected to the grounding wire.
  • IP 20 rating provides protection against contact with a finger.
  • If the protective glass is damaged or broken, it should be immediately replaced. – Maintain the minimum distance between the lamp and flammable objects.

Installation:

  • Follow the installation drawing specifications provided in the manual.
  • Ensure that the product is installed securely and according to local electrical regulations.
  • Use the provided cable and connect it to the power supply.
  • Adjust the height of the MALOTO pendant light to your desired position before installation.
  • Ensure all connections are properly tightened and secure.

Usage:

  • Once installed, use the light switch to control the MALOTO pendant light.
  • The light is dimmable, allowing you to adjust the brightness according to your preference.
  • The light direction is diffuse, providing ambient illumination around the fixture.
  • Do not exceed the maximum wattage of 40W.
  • To replace the light source, use an E27 lamp socket.
  • Follow the power requirements of 220-240V~50Hz for proper operation.
  • If you have any further questions or need additional specifications, visit the Lucide website at www.lucide.com.

Note: The information provided is a summary of the product manual. Please refer to the complete user manual for detailed instructions and safety guidelines.

LUCIDE-5411212451200-MALOTO-LED-Bulb-Vintage-Bulb-Glass-Amber-Filament-Bulb-
FIG- \(1\)

RECOMMENDED LUCIDE

LIGHT SOURCE

  • 49042/05/62
  • Dimmable : Yes
  • Included : No

General

  • Dimensions LxWxH: 30cm x 30cm x 150cm
  • Height minimum: 50cm
  • Height maximum: 150cm
  • Main material: Glass
  • Ceiling rose material: Metal
  • Color : Amber and Matt Gold / Brass
  • Style : Retro
  • Shape : Globe
  • Weight : 1,65kg

Specifications

  • Dimmable : Yes
  • Light direction: Around (Diffuse)
  • Adjustable in height : Adjustable In Height (Before Installation)
  • Directional: Not Directional
  • Cable: Yes, Cable On Product
  • Cable length: 135cm
  • Sensor: Without Sensor
  • Control: Light Switch Control
  • Power supply: Adapter/Power Grid
  • IP-Class : 20
  • Electric Class : 1
  • Number of light sources: 1
  • Lamp socket: E27
  • Maximum wattage : 40W
  • Power requirements: 220-240V~50Hz
  • Warranty : 2 Years

DIMENSIONS

LUCIDE-5411212451200-MALOTO-LED-Bulb-Vintage-Bulb-Glass-Amber-Filament-Bulb-
FIG- \(3\)

INSTALLATION DRAWING SPECIFICATIONS

LUCIDE-5411212451200-MALOTO-LED-Bulb-Vintage-Bulb-Glass-Amber-Filament-Bulb-
FIG- \(4\) LUCIDE-5411212451200-MALOTO-LED-Bulb-
Vintage-Bulb-Glass-Amber-Filament-Bulb-FIG- \(5\)

Safety Instructions
Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct installation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service.

  • Installation should always be done by a qualified electrician.
  • Always isolate the power before commencing installation, maintenance or repair. In case of doubts, please contact a qualified electrician.
  • Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installa-tion, please see further). Indoor items cannot be used in humid places.
  • Do not put the item in contact with water or any liquids or inflammable products.
  • Always respect the minimal distance (indicated on the light) to inflammable products.
  • During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician.
  • This is to avoid all risks.
  • Because the temperature of the item and the bulbs can get very high, they must cool down before being touched.
  • Always use the correct bulb (respect type and maximal wattage as indicated on the product).

Explanation of the symbols which can appear on the fixture

  • This item is only suitable for indoor use, exclusive bathroom (except if a higher IP degree permits that the item can be used in the bathroom).
  • Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with this symbol indicating separate collection of such equipment must be returned to a municipal waste collection point.
  • Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth connection (marked with this symbol).
  • Class II: The item is double insulated and must not be connected to the earth wire.
  • Class III: The item is only suitable for lower voltage supply and must not be connected to the earth wire.
  • IP 20: Protection against contact with a finger
  • If the protection glass is damaged or broken, it needs to be replaced immediately.
  • Please respect the minimum distance from the bulb to inflammable objects.

Further explanations can be found on our website. www.lucide.com

LUCIDE NV
LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM info@lucide.com tel: +32(0)3 366 22 04

ILLUMINATES YOUR WORLD
www.lucide.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals