molex 464363130 EXTreme Ten60Power Right-Angle Receptacle with Side Guides Owner’s Manual

Table of Contents

Guides

molex-464363130-EXTreme-Ten60P-ower-Right-Angle-Receptacle-with-Side-Guides-
product

Part Number: 464363130
Product Description: EXTreme Ten60Power Right-Angle Receptacle with Side Guides, 25 Signal Circuits, Press Fit Tail
Series Number: 46436
Status: Active
Product Category: Board-to-Board Connectors
Engineering Number: 046436-3130

To use the EXTreme Ten60Power Right-Angle Receptacle with Side Guides, follow the instructions below:

Ensure that the product is compatible with your application. Check the product specification for details.
Prepare the PCB (Printed Circuit Board) by aligning it with the receptacle.
Insert the press-fit tail of the receptacle into the corresponding holes on the PCB.
Ensure a secure connection by verifying that the receptacle is locked to the mating part.
Check that the grounding to the PCB is not required for your specific voltage requirements (maximum voltage: 120V).
Connect the signal circuits by aligning and mating the receptacle with the corresponding plug.
Verify that the mating part is polarized to ensure proper alignment.
If applicable, stack multiple configurations of this product for your desired setup.
Ensure that the operating temperature range is within the specified limits for your application.

Note : For additional information and guidelines, refer to the product specification and consult the manufacturer’s documentation.

molex-464363130-EXTreme-Ten60P-ower-Right-Angle-Receptacle-with-Side-Guides-
product

Part Number : 464363130
Product Description : EXTreme Ten60Power Right-angle receptacle with Side Guides, 25 Signal Circuits, Press Fit Tail
Series Number: 46436
Status: Active
Product Category: Board-to-Board Connectors
Engineering Number: 046436-3130

Documents & Resources

Drawings

3D Models and Design Files

Product Environment Compliance

Compliance

Multiple-Part Product Compliance Statements

Multiple Part Industry Compliance Documents

**

General

Status	Active
Category	Board-to-Board Connectors
Series	46436
Description	EXTreme Ten60Power Right-Angle Receptacle with Side Guides, 25

Agency

CSA	LR19980
UL	E29179

Electrical

Current – Maximum per Contact	4.5A
Grounding to PCB	No
Voltage – Maximum	120V

Physical

Circuits (Loaded)	25
Circuits (maximum)	25
Color – Resin	Black
Durability (mating cycles max)	200
Flammability	94V-0
Glow-Wire Capable	No
Guide to Mating Part	Side, Yes
Keying to Mating Part	None
Lock to Mating Part	No
Mated Height	10.00mm
Material – Metal	Copper Alloy
Material – Plating Mating	Gold
Material – Plating Termination	Tin
Material – Resin	Liquid Crystal Polymer
Net Weight	7.198/g
Number of Rows	5
Orientation	Right Angle
Packaging Type	Tray
PC Tail Length	2.50mm
PCB Locator	Yes
PCB Retention	Yes
PCB Thickness – Recommended	1.58mm
Pitch – Mating Interface	2.00mm
Plating min – Mating	0.762µm
Plating min – Termination	2.540µm
Polarized to Mating Part	Yes
Polarized to PCB	Yes
(p)ower-(s)signal Configuration	0p – 25s
Stackable	No
Temperature Range – Operating	-40° to +105°C
Termination Interface Style	Through Hole – Compliant Pin