hp 9130b Series OfficeJet Pro All-in-One Printer User Guide
- June 13, 2024
- HP
Table of Contents
hp 9130b Series OfficeJet Pro All-in-One Printer
Product Information
- Product Name: HP OfficeJet Pro 9130b series
- Manufacturer: HP
- Website: www.hp.com
Product Usage Instructions
- Unbox the printer:
- Remove all tape and packaging material.
- Power on the printer:
- Plug in the power cable to automatically power on the printer.
- Select the language and country/region on the control panel.
- Load paper:
- Open the paper tray and slide out the guides.
- Load Letter or A4 paper and adjust the guides.
- Close the tray.
- Pull open the output tray extender.
- Install cartridges:
- Open the front door and lift the cartridge access door by the scanner lid.
- Unpack the cartridges and insert each cartridge securely into the indicated slot.
- Close both doors. Note: Make sure to use the cartridges provided with the printer for setup.
- Connect the printer:
- Choose your connection method on the control panel.
- If using Ethernet:
- Connect an Ethernet cable from the printer to the same network as the computer.
- Press Continue on the control panel to confirm the IP address.
- Follow the steps on the control panel until you reach the home screen.
- If using Wi-Fi:
- Make sure the computer Wi-Fi is turned on and in range of the printer during setup.
- On the control panel, enter Wi-Fi information when prompted. Choose the same network as the computer.
- Follow the steps on the control panel until you reach the home screen.
- If using USB:
- Connect the USB cable to the port on the back of the printer and to the computer.
- Follow the steps on the control panel until you reach the home screen.
- Install printer software:
- Go to support.hp.com/go/printer to download the HP software and print drivers.
- Install the software and complete the setup.
Note: The above instructions are provided in multiple languages. Please refer to the appropriate section for instructions in your preferred language.
Unbox printer
- Remove all tape and packaging material.
Power on
- Plug in to automatically power on.
- Select language and country/region.
Load paper
- Open the paper tray and slide out the guides. Load Letter or A4 paper and adjust the guides.
- Close the tray. Pull open the output tray extender.
Install cartridges
- Open the front door and then lift the cartridge access door by the scanner lid.
- Unpack cartridges. Insert each cartridge securely into the indicated slot. Close both doors.
Note: Make sure to use the cartridges provided with the printer for setup.
Connect printer
- On the control panel, choose your connection method.
Note: If the printer will be used in an office, select the connection method recommended by your company.
Ethernet
- Connect an Ethernet cable from the printer to the same network as the computer.
- Press “Continue” on the control panel to confirm the IP address. Then continue with the steps on the control panel until you reach the home screen.
Wi-Fi
- Make sure the computer Wi-Fi is turned on and in range of the printer during setup.
- On the control panel, enter Wi-Fi information when prompted. Choose the same network as the computer.
- Continue with the steps on the control panel until you reach the home screen.
USB
- Connect the USB cable to the port on the back of the printer and to the computer.
- Continue with the steps on the control panel until you reach the home screen.
Install printer software
- Go to support.hp.com/go/printer to download the HP software and print drivers.
- Install software and complete setup.
Get help with setup
- Find setup information and videos online.
- hp.com/support/printer-setup
© Copyright 2023 HP Development Company, L.P.
References
- hp.com/support/printer-setup
- support.hp.com/go/printer
- hp.com/support/printer-setup/?utm_source=qr&utm_medium=guide
- support.hp.com/go/printer/?utm_source=qr&utm_medium=guide
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>