LUCIDE 20517-01-65 GELKA Table Lamp Instruction Manual
- June 13, 2024
- LUCIDE
Table of Contents
LUCIDE 20517-01-65 GELKA Table Lamp
Thank you for purchasing a Lucide original! This manual will hopefully guide you easily through the installation process. We aim to inspire and illuminate our clients by offering trendy, high-quality, and affordable lighting. Welcome to the community of #illuminatesyourworld
DISCOVER OUR COLLECTION!
Visit our website and discover our entire collection
CURIOUS ABOUT OUR BRAND?
Our brand video gives you a glimpse behind the scenes at Lucide
ILLUMINATESYOURWORLD
Take a look at how others around the world use Lucide products
RECOMMENDED LUCID
LIGHT SOURCE 49032/05/62
Dimmable: Yes Included: No
General
- Dimensions LxWxH: 7,6cm x 7,6cm x 8,4cm Main material: Glass
- Color: Smoke Grey and Black
- Style: Modern
- Shape: Square
- Weight: 1,05kg
Specifications
- Dimmable: No
- Light direction: Around (Diffuse)
- Adjustable in height: Not In Height Adjustable Directional: Not Directional
- Cable: Yes, Cable With Plug On Product Cable length: 160cm
- Sensor: Without Sensor
- Control: On/Off Switch – In The Cord
- Power supply: Adapter/Power Grid
- IP-Class: 20
- Electric Class: 2
- Number of light sources: 1
- Lamp socket: E27
- Maximum wattage: 40W
- Power requirements: 220-240V~50Hz Warranty: 2 Years
TECHNICAL DRAWING & DIMENSIONS
For more specifications or dimensions of this product please visit www.lucide.com
INSTALLATION DRAWING SPECIFICATIONS
Safety Instructions
Please read this notice carefully and keep it during the lifetime of this
product. Follow the instructions for a safe and correct installation and
functioning of the light fixture. The manufacturer does not accept any
responsibility for damage caused by improper installation and service.
Installation should always be done by a qualified electrician. Always isolate
the power before commencing installation, maintenance or repair.
In case of doubts, please contact a qualified electrician. Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installa-tion, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products. During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician. This is to avoid all risks. Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).
Explanation of the symbols which can appear on the fixture
This item is only suitable for indoor use, exclusive bathroom (except if a
higher IP degree permits that the item can be used in the bathroom).
Legislation requires that all electrical and electronic equipment must be
collected for reuse and recycling.
Electrical and electronic equipment marked with this symbol indicating a
separate collection of such equipment must be returned to a municipal waste
collection point.
Class I: The item has an earth connection. The earth wire (green-yellow) needs
to be connected to the earth connection (marked with this symbol).
Class II: The item is double insulated and must not be connected to the earth
wire.
Class III: The item is only suitable for lower voltage supply and must not be
connected to the earth wire.
IP 20: Protection against contact with a finger
If the protection glass is damaged or broken, it needs to be replaced
immediately.
Please respect the minimum distance from the bulb to inflammable objects.
Warranty declaration
Lucide NV warrants that the products supplied will be free from defects in
material and workmanship for a period of 2 years from the date of purchase by
the end user if the item is installed and maintained properly as mentioned in
the user manual.
Exclusions for the warranty
- Broken glass parts of the fixture will only be replaced within 14 days after purchasing by the end user.
- Normal wear and tear, and discoloring as a result of normal use.
- Damage is caused by external causes like fire, water, wrong use/ installation, or maintenance of the product.
- For warranty claims, the customer needs to hand over the defective fixture/part and the original purchase ticket.
Further explanations can be found on our website. www.lucide.com
LUCIDE NV
LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM
info@lucide.com tel: +32(0)3 366 22 04
www.lucide.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>