LUCIDE 74405 TOLEDO Hanglamp Instruction Manual
- June 13, 2024
- LUCIDE
Table of Contents
LUCIDE 74405 TOLEDO Hanglamp
Product Information
- Brand : Lucide
- Model : Toledo
- Dimensions (LxWxH ): 100cm x 20cm x 165cm
- Minimum Height: 50cm
- Maximum Height: 165cm
- Main Material : Glass
- Ceiling Rose Material : Aluminum
- Color : Amber and Copper
- Style : Vintage – Shape: Cylinder
- Weight : 5.20 kg
- Dimmable : Yes
- Light Direction : Around (Diffuse)
- Adjustable in Height : Yes, Adjustable In Height (Before Installation)
- Directional : Not Directional
- Cable : Yes, Cable On Product
- Cable Length : 135cm
- Sensor: Without Sensor
- Control : Light Switch Control
- Power Supply : Adapter / Power Grid
- IP-Class: 20
- Electric Class: 1
- Number of Light Sources : 3
- Lamp Socket : E27
- Maximum Wattage : 40W
- Power Requirements : 220-240V~50Hz
- Warranty: 2 Years
Product Usage Instructions
- Safety Precautions
- This product is only suitable for indoor use, excluding the bathroom (unless a higher IP rating allows the product to be used in the bathroom).
- The product must be connected to an earth wire (green-yellow) if it is marked with the grounding symbol.
- Class III products are only suitable for lower voltage power supply and should not be connected to the earth wire.
- IP 20 provides protection against contact with a finger.
- If the protective glass is damaged or broken, it must be immediately replaced.
- Maintain the minimum distance between the lamp and flammable objects.
- Installation
- Refer to the installation drawing specifications provided on the website for detailed instructions on installing the product.
- Lighting Control
- The product is dimmable, allowing you to adjust the brightness according to your preference.
- Use the light switch control to turn the product on/off.
- Power Supply
- Connect the product to an adapter or power grid with a power supply of 220-240V~50Hz.
- Maintenance
- For any technical specifications, dimensions, or further information about the product, visit the Lucide website.
Note: The provided text contains additional content in a different language (Dutch and French), which does not pertain to the product information or usage instructions.
INSTALLATION MANUAL
Thank you for purchasing a Lucide original!
This manual will hopefully guide you easily through the installation process.
We aim to inspire and illuminate our clients by offering trendy, high-quality
and affordable lighting.
Welcome to the community of #illuminatesyourworld
-
Visit our website and discover our entire collection
-
Our brand video gives you a glimpse behind the scenes at Lucide
-
Take a look at how others around the world use Lucide products
-
Item number: 74405/03/62
-
EAN code : 5411212740854
RECOMMENDED LUCIDE LIGHT SOURCE
- 49034/05/62 Dimmable : Yes
- Included : No
General
- Dimensions LxWxH: 100cm x 20cm x 165cm
- Height minimum: 50cm
- Height maximum : 165cm
- Main material : Glass
- Ceiling rose material : Aluminum
- Color : Amber and Copper
- Style : Vintage
- Shape : Cylinder
- Weight : 5,20kg
Specifications
- Dimmable: Yes
- Light direction : Around (Diffuse)
- Adjustable in height : Adjustable In Height (Before Installation)
- Directional: Not Directional
- Cable: Yes, Cable On Product
- Cable length : 135cm
- Sensor : Without Sensor
- Control : Light Switch Control
- Power supply : Adapter/Power Grid
- IP-Class : 20
- Electric Class : 1
- Number of light sources : 3
- Lamp socket : E27
- Maximum wattage : 40W
- Power requirements: 220-240V~50Hz
- Warranty: 2 Years
For more specifications of this product please visit
www.lucide.com
TOLEDO
Safety Instructions
- Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct instal-lation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation should always be done by a qualified electrician.
- Always isolate the power before commencing installation, maintenance or repair.
- In case of doubts, please contact a qualified electrician.
- Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installa-tion, please see further). Indoor items cannot be used in humid places.
- Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products.
- During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician.
- This is to avoid all risks.
- Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).
Explanation of the symbols which can appear on the fixture
This item is only suitable for indoor use, exclusive bathroom (except if a
higher IP degree permits that the item can be used in the bathroom).
Legislation requires that all electrical and electronic equipment must be
collected for reuse and recycling. Electrical and electronic equipment marked
with this symbol indicating separate collection of such equipment must be
returned to a municipal waste collection point.
Class I: The item has an earth connection. The earth wire (green-yellow)
needs to be connected to the earth connection (marked with this symbol).
Class II: The item is double insulated and must not be connected to the
earth wire.
Class III: The item is only suitable for lower voltage supply and must
not be connected to the earth wire.
IP 20: Protection against contact with a finger
If the protection glass is damaged or broken, it needs to be replaced
immediately.
Please respect the minimum distance from the bulb to inflammable objects.
Further explanations can be found on our website.
www.lucide.com