ebikemoto BR100 E-Bike TK200 Electric Bike User Manual
- June 13, 2024
- ebikemoto
Table of Contents
- BR100 E-Bike TK200 Electric Bike
- ABOUT THIS MANUAL
- IMPORTANT SAFETY INFORMATION
- OPERATIONAL INSTRUCTIONS
- COMPONENT INSTALLATION NOTES
- RECHARGING THE BATTERY
- BATTERY & CHARGER CARE
- LED DISPLAY
- KEYS
- BRAKES
- TIRES & INNER TUBES
- APPEARANCE
- E-Bikes FAQ
- INSPECTION & MAINTENANCE
- WARRNATY CERTIFICATE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
E-Bike
User Manual
BR100 E-Bike TK200 Electric Bike
ATTENTION
Please read this manual carefully before using the YYG electric bicycle.
If you have any question, please feel free to contact with Seller.
WELCOME
THANK YOU FOR CHOOSING OUR E-BIKES Welcome to your E-bike you are entering
a new world of ease,luxury,and mobility. Whether you’re looking for an
environmentally friendly alternative to your regular gas-powered vehicle,a fun
way to avoid traffic congestion,or Simply want to spend more time outdoors,we
hope you enjoy your new E-bike,in a life full of head-winds and tailwinds.it
is our honor to be wind at your back.
If you have questions or comments, please don’t hesitate to contact us.
BIKE IDENTIFICATION NUMBER/SERIAL NUMBER
FORYOUR RECORDS
For future reference please fillin the important information below . Your
serial number can be found on the inward-facing surface of the frame seat stay
oron head top tube.
Please retain your sales receipt for any possible warranty or loss claims.
MY E-BIKE SERIAL NUMBER :
FORYOUR RECORDS
MY E-BIKE
Name……………..
Address………….
Purchase Date…………..
Purchase Channel……………….
WEBSITE…………..
Model………………
Color………………
Serial #……………..
ABOUT THIS MANUAL
This manual was written to help you get the most perfor mance, comfort,
enjoyment, and safety when riding your new E bike. The manual describes
specific care and maintenance procedures that help protect your warranty and
ensure years of trouble free use. Please pay particular attention to the
section on battery charging and maintenance.
It is important for you to understand your new E-bike its features and its
operation, 50 you get maximum enjoyment with maximum safety By reading this
manual before you go out on your first ride, you’ll know how to get the most
from your new E-Bike It is also important that your first ride on a new.
E Bikeis taken in a controlled envi ronment
IMPORTANT SAFETY INFORMATION
Cyeling can be a hazardous activity even under the best of circumstances .
Proper maintenance of your E- ike is your responsibilty,as it helps reduce the
risk of inj ury. This manual contains many warnings about the consequences of
failure to maintain or inspect your E-bike Improper use could resultin serious
injury or death.
We recommend you use a trusted professional bike technician to assemble your
E-Bike IMPORTANT SAFETY INFORMATION
A.ALWAYS WEARA HELMET
Helmets significantly reduce the number and severity of head injuries. Always
wear a helmet that complies with your state laws when riding your E-bike.
Check with your local police department for requirements in your community.
Make yourself more visible by wearing bright reflective clothing. Keep your
reflectors clean and properly aligned. Use head and tail lights in reduced
lighting conditions. Wear study shoes and eve rotection. Also check your state
laws concerning other protective gear that may be required when riding your
E-bike.
B. KNOW YOURE BIKE
Your new E-bike incorporates many features and functions that you may be
unfamiliar with. Read this manual thoroughly to understand how those features
enhance your riding pleasure and safety.
C. RIDE WITHIN YOURLIMITS
Take it slow until you are familiar with the riding conditions as traction can
be greatly reduced and brakes become less. effective . Never ride faster than
conditions warrant or beyond your riding abilities. Remember that alcohol,
drugs, fatigue, and inattention can significantly reduce your ability to make
good judgement and ride safety.
D. KEEP YOUR E BIKE IN SAFE CONDITION
For your safety and enjoyment, and to ensure a long life for your E-bike,
inspected and maintain your E-bike regularly.
Follow the inspection and maintenance guidelines throughout this manual. Check
critical safety equipment before starting every ride.
COMPONENT OR CONDITION| INSPECT BEFORE EVERY RIDE| INSPECT
PERIODICALLY’| CLEAN ANITEOR
LUBRICATE| ADJUST/TIGHTEN| REPAIRREPLACE IF NECESSARY
---|---|---|---|---|---
Tiro pressure150.65 pal)| Χ| | | Χ|
Tim wear I damage| Χ| | | Χ|
Brake pad adjustment| Χ| | | Χ|
Wheel quick cola ma ndjuhltn.nt| Χ| | | | Χ
Mead and tag lights| Χ| | | | Χ
Controls and displays| Χ| | | |
Seat poet quick Meese adjustmc| Χ| | | Χ|
Brake pad wear| | Χ| | Χ| Χ
Brake cable tension /wear| | Χ| | Χ| Χ
Spoke tension| | Χ| | Χ|
Wheel true| | Χ| | Χ|
Hub bearings| | Χ| Χ| Χ|
ChM., lubrication| | Χ| Χ| |
gerailleur adjustment| | Χ| Χ| Χ|
Reflectora| | Χ| | | Χ
Battery and charger| | Χ| | | Χ
Headset adjustment| | Χ| Χ| Χ|
Bottom bracket adjuntmcm| | Χ| Χ| Χ|
All bolts, nuts mounting hardware| | Χ| | Χ| Χ
“Every 5to 10 rides depending on length and conditions of ride.
OPERATIONAL INSTRUCTIONS
LEFT HANDLEBAR
A
Handlebar brake The brake
B
Left Handlebar Grip
c
Instrument control key
Long press M key to switch on/off machine
Press + key toincrease gear
Press – key to reduce gear
Press – D key to turn on the headli RIGHT HANDLEBAR
A
Brake
B
Anti-slip handlebar
C
Turn the throttle to accelerate
COMPONENT INSTALLATION NOTES
PART 1: REMOVE PACKAGING
- Unpack your YYG electric bike.
- Installation tools
- Remove front wheel.
PART 2: HANDLEBAR ASSEMBLY
- Loosen the riser sides A, B screws
*Before installation, pay attention to the front and rear brakes always on the same side - Fix the front shock absorber and rotate the riser 180°
- Tighten the side A, B screws
- Remove front 4 bolts from stem cover then remove stem cover
- Mount handlebar onto stem, then replace stem cover and tighten all 4 bolts
- Adjust handlebar according to your needs, then ensure all bolts are tightened firmly
PART 3: HEADLIGHT & FRONT WHEEL ASSEMBLY
-
Take out the quick release tool shown as above
-
Turn the bike upside down
Adjust the height of the seat and rotate the angle of the dashboard to avoid direct contact with the ground -
Remove the fork protector
A: The protective shaft can be removed and thrown away -
Putthe wheel in the front fork
Disc brake disc alignment clamp card slot -
Insert the front wheel for quick release
A: Adjust the screw pressure![ebikemoto BR100 E-Bike TK200 Electric Bike
-
Fork 2](https://manuals.plus/wp-content/uploads/2023/10/ebikemoto-BR100-E -Bike-TK200-Electric-Bike-Fork-2-1.jpg)
- Lock front wheel quick release Installation is complete
PART 4: PEDAL AND SADDLE MOUNTING &DIRECTION ADJUSTMENT
-
Identify the left and right pedals
“L” means the left side is mounted on the crank
“R” means the right side is mounted on the chainring -
“L” pedal is fixed counterclockwise to the crank
-
“R” pedal is fixed clockwise and fixed on the chain – Ring
-
Check all fastening and locking mechanisms of the vehicle before riding to ensure safety ..
Lamp fixing and installation
- Remove headlights and mounting parts
- Remove the screw from the mounting plate shown above
- Tighten screws
- Fix the headlight on the fork as shown
- Remove taillight fixing screw
- Fasten he taillight
PART 5: INSTALLING & REMOVING THE BATTERY
- Remove the battery.
- Insert battery box guide rail into battery box on frame
- Push the battery case into position so that the battery box battery socket is inserted normally
- Turn the key, complete the battery box and the frame lock
- If you need to remove the battery, follow the above steps and reverse the order.
- Checkall fastening and locking mechanisms of the vehicle before riding to ensure safety..
Installand remove seatcushion
- As shown in the figure, understand that the seat cushion is a rail snap design
- Ensure that the frame mounting guide is free of debris
- Alignment guide insert
- Check all fastening and locking mechanisms of the vehicle before riding to ensure safety ..
Pullingandinserting of waterproof cable
- Waterproof line pull plug, pay attention to the good side of the mouth
- Controller waterproof cable
- Connect motor waterproof cable
- Connect displayer aterproof cable
- Connect the power-off brake handle waterproof cable
- Checkall electrical functions and fastener safety before riding
RECHARGING THE BATTERY
A. Recharge the battery on E-bike directly B. Remove battery from the E-bike and recharge separately
RECHARGING THE BATTERY
ATTENTION
Connect the battery first,then connect the power supply and make sure the red
LED of the charger is lit, The charger will charge the completed battery
within 3 to 7hours.
Ared light indicates that the battery is charging, A green light indicates
that the battery is fully charged.
BATTERY & CHARGER CARE
If the battery will not be used for an extended period of time,charge it fully
and recharge it every 2 months.
Store in a cool, dry place, Recharge the battery before it becomes completely
discharged.
Do not use it to power other electrical devices. Improper use of the battery
will damage the battery and shorten its useful life and may cause fire or an
explosion. If you experience unusual sounds or odors coming from the charger
ro the battery unplug charger immediately and contact custome service.
Recharge battery after every use.
Do not disassemble or alter the battery or battery
charger. Do not place the battery near fire or corrosive substances. Do not
allow any liquids on or inside the battery/charger, Do not expose the
battery/charger to extreme weather conditions.
Do not operate the battery/charger if damaged.Recharge the battery only with a
charger specified by the manufacturer.
Do not use the battery/charger for any use other than its intended purpose.
LED DISPLAY
RIDING MODES
Power Assist Sytem(PAS)
PAS 1: Low speed level, 19KM/H
PAS 2: Medium speed level, 27 KM/H
PAS 3: High speed level, 36 KM/H
PAS 4: Very high speed level, 44 KM/H
PAS 5: Maximum speed level,52 KM/H
The speeds listed here are only for reference, Actual speeds will be affected by rider weight temperature, road situations,incline, battery status, etc.
KEYS
Your YYG electric bike comes with two keys
- Ignition key
- The key t the battery holder onthe bicycla rame
WARNING
Keep out of reach of children,Always keep your keys in a safe place to avoid
losing them.
BRAKES
It’s important to your safety that you instinctively know which brake lever
controls which brake.
Your E-Bike is equipped with disc brakes for maximum reliability. Applying
hand pressure to the brake levers will cause the wheel brake to create
friction against the brake disc,slowing the wheel.
The faster the E-Bike will come to a stop.
The rear brake should always be applied before and while the front brake is
applied. Applying only the front brake to slow or stop at high speeds may
result in the rider being ejected from the saddle and continuing forward over
the handlebars, It is best to apply even pressure to both brake levers when
slowing or stopping.
Bicycles equipped with disc brakes will occasionally make a slight scraping
noise when the wheels are turning without the brakes being applied, This is
normal.
Make sure that the brake lever does not contact the handle bar when full hand
pressure is applied (figure 1). If So, then the brakes must be adjusted by
increasing the tension on the cable.
Aquick adjustment may be made by screwing or unscrewing the threaded barrel
adjuster on the brake lever until the brakes are fine-tuned for safe
stopping(Figure 2).If the brakes are still not operating correctly they may
require further adjustment by an experienced bicycle mechanic.
WARNING
- Disc brake rotors become hot during use. Do not touch or come in contact with the disc rotor shortly after use.
- Wet weather will require a longer distance to stop
Brake earlier and avoid sudden stops when riding in wet conditions.
|
---|---
TIRES & INNER TUBES
Tires should not be deflated unless necessary, To minimize tire wear and for maximum riding safety,comfort,and handling,maintain recom- mended tire air pressure.This can be found on the side wall of all tires, Use a reliable tire air pressure gauge to check for proper inflation before every ride. At the same time, inspect tires for excessive wear and cracks, Replace tires if necessary.
APPEARANCE
Periodically clean your YYG E-Bike with a damp cloth, Avoid spraying the YYG with a water hose to avoid electrical issues, Store your YYGin adry, sheltered are a away from direct sunlight and wet ordamp environments.
E-Bikes FAQ
Q. How long dose it take to fully charge the battery?
A. It depends on the state of depletion but around 3-6 hours if completely discharged.
Q. Can I ride up hills and against strong headwinds on my yyG electric bike?
A. Yes, One of the main advantages of cycling on a YY6 electric bicycle is that it flattens hills and increases your average speed when tackling inclines and headwinds. If you provide a reasonable amount of effort, you should be able to tackle anything from a 10% gradient up to a 14% gradient. You will be amazed at the relative ease with which your new YYG electric bike can tackle some of the most arduous journeys.
Q. Doi have to pedal an electric bike?
A. No, but it helps to prolong battery life. The motor on our bikes is both throttle and pedal assist con- trolled, allowing you to decide how much power you desire, Have you ever tried to cycle when speeding downhill on your normal bicycle? It's just like that. The motor is propelling you faster than you're cycling, so there is pretty much no resistance. It's merely a formality!
Q. What happens when I use the brakes under powered assistance?
A. All of our bikes are equipped with brake levers that have a built-in safety switch that automatically cuts off the motor power under normal braking conditions. This not only ensures a safe unpowered stopping feature, but also protects the motor under braking conditions so that it isn't working against the brakes.
Q. How far will YYG take me?
A. This all depends on a few factors. Cycling with pedal assist along a straight road under normal conditions, the standard battery should last about 50-70 km. Cycling up steep hills will obviously takes more energy out of the battery and factors such as road surface, wind resistance, weight of the rider and tire pressure will affect your range.
Q. What happens if I get a flat tire?
A. The tires on our bikes are the same as conventional bicycles. Simply replace the tube with a tube of the right size and inflate it. No special tires or parts will be needed.
Q. How do I know when the battery is low?
A. The E-bike has easily visible indicators located on the right handlebar or LED screen that show the Power capacity. If it gets low and you don't think you will make it to your destination, you can switch off your motor and keep it just for the difficult bits.
Q. Do I have to wait for the battery to empty before I charge it?
A. No. The batteries we use are Lithium-ion batteries which do not suffer from the ‘memory effect’. This means that there is no need to discharge a battery completely before you recharge it again. You can partially recharge the battery at any time without reducing its voltage or lifespan. We recommend recharging the battery after every use, regardless of how far you rode.
|
---|---
INSPECTION & MAINTENANCE
Charge indicator
Red indicates charging, green indicates that the battery is full.
Note: The battery switch must be turned off using the switch on the
bottom when the battery is charging. The battery must be fully charged before
the first use. We recommend you charge the battery for a full 6 hours after
your first 3 uses. If the bike is not used for along time, you should fully
charge and remove the battery. While not in use, keep the battery turned off
and recharge every 2months.
Make sure to keep the battery and charger away from children during charging
Do not attempt to disassemble or modify the battery or charger.
Do not use the battery or charger for any use other than its intended purpose.
Battery charging
Plugin the connector between the charger and the battery, then plug the
charger into an electrical outlet. The LED indicator on the charger will show
red, which means charging. When the indicator light turns green, the battery
is fully charged. When you are finished charging, first unplug the charger
from the power supply, and then unplug the connector between the battery and
the charger.
During the charging process, the charger and battery should be placed in a
stable and cool place. The battery operating temperature range should be
between 32 and 110 degrees fahrenheit. Do not put any cover on the battery or
charger. Make sure that no liquid comes into contact with the charger.
Hand brake cut-off power
When your bike is equipped with brake cut-off power set, the bike will
automatically cut off power when the brake is used.
Low voltage protection
When the battery output voltage reaches its limit, the electronic control
system will cut off the power to automatically protect the battery. When the
battery reaches its minimum voltage, you can switch to pedal riding. The
battery should be recharged before riding again.
Power off
When your E – Bike is not in use, please turn off the power.
BASIC MAINTENANCE
- To ensure that your E-Bike is i the best condition, maintain and clean regularly.
- Regularly check that the tires are inflated correctly.
- Make sure that quick release, nuts and bolts are tightened.
- After a period of riding, check that the spoke tension is normal. Adjust as needed.
- The frame and other parts are made of aluminum alloy. Avoid friction or ollision and clean it regularly.
- Do not take apart the motor, battery, or controller yourself. If necessary, take your E-Bike o a professional bicycle technician for repairs.
- Do not use high-pressure water to clean your E-Bike. Keep water away from the controller, battery and motor.
- Lubricate the chain, flywheel, head parts, Kickstand, etc. when necessary.
Mileage
Performance of electric bicycles s affected by road conditions, rider/load
weight, and weather conditions. We recommend that you manually pedal as often
as possible to improve your travel distance and and battery life.
Inclines
When riding uphill on an incline of 15 degrees or more, we recommend using the
pedal to assist your climb.
Cleaning
When cleaning your electric bicycle, wipe with a dry or damp cloth, do spray
directly with a hose. Do not put oil on the front brake.
The seat tube should be cleaned and lubricated if necessary.
Parking
Please make sure your YYG E-Bike is parked in a stable place and the kickstand
is used.
WARRNATY CERTIFICATE
YYG E-Bike Warranty
In the rare case that your E-Bike arrives and does not work, In order to honor
the warranty the following must be followed:
- If your E-Bike is received with a defect, YYG will take care of the shipping fees (at YYG instruction) and immediately ship replacement equipment or repair the equipment.
- If your E-Bike is in need of repairs, the owner must contact YYG will receive a Return Authorization (RA) Number and all ofthe necessary information. yvawill not accept returns without an RA.
- All returns must be properly packaged to prevent damage during shipment. An explanation of the problem or damage and a proof of purchase must be submitted with the returm which will be shipped by the owner.
- The RAnumber must be clearly visible.
- The owner will be responsible for insurance of the merchandise (at owner’s cost) because YYG will notbe responsible for damages or losses during shipment.
Important
YYG warranties against manuf acturer defects for all of our regular elec tric
bikes and parts except accessories.
The warranty period begins on the delivery date within twelve (12) months.
Please note this warranty only covers the initial purchaser and DOES NOT cover
accessories.
Validity
The warranty is valid only when:
a) The Product s purchased from YYG authorized dealers or outlets.
b) The Product is NOT transferable o any third party either in ownership or
during the period of contract.
c) The model and serial label should not be defaced or removed from the
Product.
Exclusion
a) Damage or loss caused by modification, alteration, or repair by any
unauthorized party.
b) Damage or loss cause by mishandling by the customer or person (s) with
access to the product on the customer’s premises.
c) Normal wear and tear.
d) Damage or loss caused by Acts of God o any other causes beyond YYG control.
e) Damage or loss as a result of external bodies.
f) Damage or loss caused by another device that is connected to the Product.
g) Damage resulting from accidents, misuse, abuse, tampering, or failure of
the customer to follow normal operating procedures outlined in the user
manual.
h) General maintenance and servicing.
The warranty is void if: The damages are a result of an accident, abuse,
alteration, non-authorized usage, or use of electricity other than that
indicated in this manual.
The warranty is void if : The owner or user neglected to do routine
maintenance re -quired and the damages or problems are directly related to
such neglect. It is the user’s responsibility to keep the E-Bike in proper
condition.
Certain parts of the equipment are not covered by the YYG warranty due to
the fact that they require replacement after multiple uses. For example:
buttons, pedals, seats, tires, etc. These parts will eventually require
replacement at the owner’s cost.
The manufacturers will not be held responsible for damages or monetary losses
related to the purchase or use of their products. YYG denies responsibility
for all physical and moral damages linked to the purchase and use of their
products. In all cases,the damages can not exceed the purchase price paid by
the initial owner.
The final decision to honor the warranty is taken by YYG personnel after a
technic inspection when the owner returns defective.
The warranty excludes:
- Replacement and shipping costs of prod-ucts worn out by normal use.
- Replacement and shipping costs of prod-ucts due to problems related to neglect, abuse, or lack of maintenance.
Warranties are NON-TRANSFER-ABLE.
Product Data
E-Bike Model: ————–
Serial Number: ————–
Purchase Date: ————–
Order Number: ————–