ITC Vi VPH Desktop Phone Charger Installation Guide
- June 13, 2024
- ITC
Table of Contents
ITC Vi VPH Desktop Phone Charger
Product Information
The ViTM Desktop Phone Charger is a device that allows you to charge your phone conveniently on your desk or work surface. It is designed for interior use only and has the following electrical ratings
- Power Supply : 24V AC | 1.2A
- Charging Capacity
- Wireless: Up to 10W
- USB-A : 5V / 2.4A / 12W
- USB-C : 5V, 9V, 12V, 20V / 3A / Max 60W
The device complies with Part 15 of the FCC rules and meets FCC radiation exposure limits for an uncontrolled environment. It is important to maintain a minimum distance of 15cm between the radiator and your body during installation and operation.
Product Usage Instructions
Desktop Version
- Choose a desired location on your desk.
- Place the ViTM Desktop Phone Charger in the selected location.
- Plug the charger into the power supply.
- Connect the other cord to the power supply.
- Plug the power supply cord into a wall outlet.
Clamp Mount Version
- Select a suitable location on your work surface.
- Place the charger portion on top of the work surface.
- Slide the bracket and knob under the surface and tighten until secure.
- Plug the charger into the power supply.
- Connect the other cord to the power supply.
- Plug the power supply cord into a wall outlet.
If you encounter any issues or need assistance, please consult the dealer or an experienced radio/TV technician for help.
Vi™ Desktop Phone Charger
- Part #: VPH
INSTALLATION INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS Interior use only.
- Electrical ratings
- 24V AC | 1.2A
- Charging Capacity: Wireless: Up to 10
- USB-A – 5V / 2.4A / 12W
- USB-C – 5V, 9V, 12V, 20V / 3A / Max 60W
FCC Statement
This device complies with Part 15 of the FCC rules
Operation is subjected to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
FCC Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. The equipment should be installed and operated with
minimum dis-tance 15cm between the radiator & your body.
FCC VOC
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a partic-ular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Only radiated measurements are used to show compliance with FCC limits for fundamental and spurious emissions.
Desktop Version
Place in desired location on the desk and plug the charger into the power
supply. Plug the other cord into the power supply and then plug into the wall.
Clamp Mount Version
Select location and place the charger portion on top of the work surface.
Slide the bracket and knob under the surface and tighten until secure to the
surface.
Plug the charger into the power supply. Plug the other cord into the power
supply and then plug into the wall.
3030 Corporate Grove Dr. Hudsonville, MI 49426- Phone: 616.396.1355
- itc-us.com
- 3030 Corporate Grove Dr. Hudsonville, MI 49426
- Phone: 616.396.1355
- itc-us.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>