TARAMPS T 2400 Home Professional Amplifier Instruction Manual
- June 13, 2024
- TARAMPS
Table of Contents
TARAMPS T 2400 Home Professional Amplifier
Product Information
- Brand: Taramps Electronics
- Address: CEP: 19.180-000
- Contact Numbers: (18) 3266-4050 / 99749-3391
- Email: assistencia8@taramps.com.br
Index
- Term of warranty Technical assistance
- Introduction
- Safety requirements
- Safety
- Front panel
- Rear panel
- Connection example
- Connection to the AC mains
- Technical features
Introduction
Congratulations on your purchase of a Taramps product.
It was developed in a modern laboratory and with the latest technology.
This manual covers all features, operations, and instructions to solve any
doubt that may arise during the installation. Please take some time to read it
carefully in order to ensure the proper installation and the use of all
benefits that this product can offer. For questions, please call +55 (18)
3266-4050, e-mail support@taramps.com.br or visit
www.taramps.com.br.
Safety requirements
- To ensure proper use, please read through this manual before using the amplifier. It is especially important that you know the CAUTIONS contained here.
- The installation of this amplifier must be done by a qualified professional.
- This amplifier must be installed in a firm place with at least 1” space around the heatsink for proper heat spreading.
- Never install the amplifier in places exposed to dust, humidity, water, or heat sources.
- Do not open. This product is not user-serviceable.
- Don’t block and do not insert objects into the amplifier’s ventilation openings.
- Avoid dropping this amplifier, risk of damage.
- When in use, the top surface of the amplifier becomes hot. Avoid contact and keep the amplifier out of the reach of children.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- This amplifier can produce high sound pressure levels. Avoid continuous exposure to levels above 85dB to prevent hearing damage.
- Speaker output connections may have voltage levels when the amplifier is operating. Make sure the amplifier is OFF before proceeding with any connections or disconnections at these terminals.
- If you want to dispose of this amplifier, please do not throw it in household waste. It must be collected by a used electronics disposal service for proper recycling.
Safety
As you read this manual, pay attention to the safety symbols.
CAUTION: This symbol with “CAUTION” is intended to alert the user to the presence of important instructions. Failure to heed the instructions will result in a risk of injury to the user or product damage.
Front panel
- 19″ RACK MOUNT HOLE: Use these holes to fix the T 2400 on the rack.
- CLIP LED : Indicates that the amplifier is operating at the distortion threshold of channel A. 3 – SIGNAL LED: Signal presence indicator for channel A.
- VOLUME: Volume adjustment for channel A.
- VOLUME: Volume adjustment for channel B.
- SIGNAL LED: Signal presence indicator for channel B.
- CLIP LED: Indicates that the amplifier is operating at the distortion threshold of channel B. 8 – ON / OFF SWITCH: Turns amplifier power on and off.
Rear panel
- AC POWER INPUT: Connect the cable to the AC mains. This product operates with 120V AC or 240V AC (automatic dual voltage).
- OUT B: Channel B power output for speakers. Follow the indicated polarity and the recommended minimum impedance (4 Ohms).
- OUT A: Channel A power output for speakers. Follow the indicated polarity and the recommended minimum impedance (4 Ohms).
- INPUT: Audio inputs (unbalanced) 1/4″ or RCA input.
Connection example
1/4″ or RCA signal inputs: To connect audio mixer, equalizer, audio processor, receiver, etc…
CAUTION
- Due to the presence of voltage at the output terminals when the product is on, avoid contact with them. Risk of electric shock. Connect signals with amplifier volumes at a minimum.
- Connect the output cables only with the product.
Connection to the AC mains
- The wall power outlet must withstand the amplifier’s maximum current draw.
Technical features
Minimum Output Impedance
Nominal power with 1KHz sinusoidal signal and 4 Ohms resistive load. (Measured
according to IEC 60268-3 Sound Equipment, Part 3: Amplifiers).
Taramps reserves the right to modify the contents of this document at any time
without prior notice and does not have the obligation to apply the changes in
units which were previously produced.
Term of warranty
TARAMPS, located on Abilio Daguano Street 274, Res. Manoel Martins – Alfredo Marcondes, SP – Brazil, ZIP CODE 19180-000, guarantees this product against any defects on terms of project, making, assembling, and/or with solidarity, due to project vices which cause it improper or inadequate to its original use within 12 months from the date of purchase. In case of a defect during the warranty period, TARAMPS’ responsibility is limited to the repairing or substitution of the device of its own making.
This warranty excludes
- Damaged products by improper installation, water infiltration, and violation by unauthorized individuals;
- Tamper or torn warranty seal;
- Cases in which the product is not used in adequate conditions;
- Defects caused by accessories, modifications, or features attached to the product;
- The product with damage from falling, bumps or nature-related problems (flooding, lightning, etc.);
- Warranty card is not properly filled or torn;
- Costs involving uninstallation, reinstallation of equipment as well and shipment to the factory;
- Damage of any kind, due to problems in the product, as well as losses caused by discontinued use of the product.
Technical assistance
- For international support, check on our website: www.taramps.com.br/en/rede-de-assistencias-tecnicas or contact direct factory support:
- Phones: +55 18 3266-4050 / +55 18 99749-3391
- E-mail: service@taramps.com.br
Fabricado por / Manufactured by:
TARAMPS ELECTRONICS LTDA
- CNPJ / TAX ID: 11.273.485/0001-03
- R. João Silvério, 121 – Res. Manoel Martins
- Alfredo Marcondes – SP
- Indústria Brasileira – Made in Brazil
- www.taramps.com.br
- +55 18 3266-4050
MN_019708_R00
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>