TITANWOLF 305384 Gauntlet Wired Gaming Mouse User Manual
- June 13, 2024
- TITANWOLF
Table of Contents
TITANWOLF 305384 Gauntlet Wired Gaming Mouse
Current drivers, user manuals and other relevant documents for this product can be found on our homepage.
https://model.ganzeinfach.de/305384
Thank you for choosing a TITANWOLF product. Please read the following user manual carefully to have an enjoyable experience with your purchased product.
Scope of supply
- Gauntlet Wired Gaming Mouse
- 8 x 2.4 g weights (already fitted)
- User manual
- Software CD
Specifications
- perfectly designed to meet the needs of gamers: up to 16400 DPI, 12000 FPS, variable polling rate up to 1000 Hz, 30 G acceleration
- Avago sensor ensures accurate gaming and a more thrilling gaming experience in conjunction with Omron mouse buttons
- 18 programmable buttons, 5 setting profiles that can be stored, display of the selected profile using the LED colour, 8 x 2.4 g weights to customise the handling, configurable LED light with 16 million variants
- durable gliding pads, 12 side buttons, ergonomic design for right-handed people, rubberised surface for better grip, gold-plated USB connector
- Ambient temperatur: 0-40°C.
System requirements
- Operating system: Microsoft® Windows® 10/11 (32/64bit), Windows® 8.1, Windows® 8 (32/64bit), Windows® 7 (32/64bit), Windows® Vista (32/64bit), Windows® XP (32/64bit)
- Hard disk: 20MB of free disk space is required
Installation
Connect the device to a free USB port on your computer.
An installation is necessary to use the gaming mouse that you have purchased.
For this purpose, insert the driver CD into your drive. The automatic playback
opens.
Click on “Run autorun.exe” to access the installation menu
The installation can be started by selecting the “Install” button in the installation menu.
A confirmation prompt is displayed that needs to be accepted with “Yes”.
Now follow the instructions of the installation wizard to carry out the installation properly.
Once the process is completed, you can stop the installation program by clicking on “Finish”. The software is now fully installed and can be used immediately
Software settings
You have the option of carrying out many settings in the configuration software of the gaming mouse. Five configurable profiles are available, between which you can change by using the button below the mouse, or a button that is individually selected for the purpose.
Additional information about the setting options are given below : for profile-independent settings, settings relating to a specific profile, and for creating macros.
General profile settings
- Language selection: A selection list is provided at the top right section of the software for selecting the language. Select your preferred language from the existing languages
- Info: Information about the installed driver version, the precise model name of the mouse as well as contact information for technical support requests, is given here
- Resetting everything: It is possible to reset the settings of all the profiles back to the factory settings using the “Reset all” button.
Configuring the profiles
The options, which are explained in detail below, can be individually configured and saved for each of the profiles. Select the profile which you want to change at the bottom of the window using the mouse.
General
- Mouse speed: The mouse speed defines how the pointer speed behaves with respect to the speed at which the mouse moves
- Pointer speed: The speed with which the pointer moves can be configured using the pointer speed setting. In contrast to the mouse speed, the speed does not vary in relation to the mouse movement, but is proportional
- Scrolling speed: The scrolling speed of the mouse wheel can be configured here
- Double-click speed: The double-click speed defines the maximum time between two clicks, so that it can be registered as a double click and not two individual clicks. The square to the right of the setting is a field in which you can test the double-click speed
- Polling rate: Select your preferred polling rate to define the intervals at which the mouse sends the position data to the computer. A polling rate of 1000 Hz means that data is sent 1000 times per second
- Configuring the mouse buttons: The buttons at the top of the mouse as well as those at the side can be freely configured. Please click on “Main buttons” or “Side buttons” to make the desired settings. To reconfigure a button, click on the number corresponding to the desired button in the list on the right of the mouse diagram. The mapping of numbers and buttons is shown in the diagram. You can not only choose from preconfigured options, but also make individual settings. A special feature is the op
Note: Please remember the “Z” and “Y” are reversed. To configure, use the other letter than the one desired to get the right result.
DPI
In the DPI settings, you have the option of configuring 5 individual DPI levels for each profile or disabling them if desired. Ticking the “Synchronise the axes” option specifies, whether the values for the horizontal and vertical speed are identical or can be independently configured.
LED
The mouse wheel light indicates which profile is currently active:
- Yellow: Profile 1
- Green: Profile 2
- Blue: Profile 3
- Violet: Profile 4
- Red: Profile 5
You can customise the LED light of the logo and the side buttons for each profile separately. You can select the colour, brightness and breathing-speed (pulsing) as desired to customise the appearance. The “Breathing OFF” option stops the pulsing and the LEDs glow constantly.
Creating macros
Macros are recordings of specific key sequences, which can be run by pressing a single mouse button depending on the configuration. This can, for example, be keystrokes or mouse commands. To define a macro, please click on the desired button and then select “Macro” and “Macro Manager” from the list as described in section 5.2.1. To start recording a new macro, first click on “New” and then specify a name. Then the recording can be started using the button and stopped using .
Additional options are available on the right side of the Macro Manager for recording the steps. Thus you can define whether the time between pressing the individual buttons and the stop times are measured and recorded, whether you want to configure a fixed delay as desired or whether the recorded macro is executed several times when the mouse button is pressed. The option of editing the recorded steps subsequently is also available.
Note: Please remember the “Z” and “Y” are reversed. To configure, use the other letter than the one desired to obtain the right result.
Adjusting the weight
There is a circular cover on the underside of the mouse behind which the weights of the mouse are located. A total of 8 weights each of 2.4 g are provided.
Carefully rotate the cover to remove it from the mouse. Now you can add or remove weights to arrive at your preferred mouse weight. Before closing the cover, ensure that the weights are complete and placed straight inside the place holders, to prevent any damage to the mouse.
Resetting to factory settings
It is possible to reset the settings of all the profiles back to the factory settings using the “RESET ALL” button at the bottom of the software. If you only want to reset one profile without affecting the other profiles, it can be done by clicking on “Reset profile”.
Safety instructions and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid contact with mains voltages. Do not short-circuit the product. The device is not certified for use in the open air; only use it in dry conditions. Protect it from high humidity, water and snow. Keep it away from high temperatures. Do not subject the device to sudden changes in temperature or heavy vibration as this might damage electronic components. Examine the device for damage before using it. The unit should not be used if it has received an impact or has been damaged in any other way. Please observe national regulations and restrictions. Do not use the device for purposes other than those described in the instructions. This product is not a toy. Keep it out of the reach of children or mentally impaired persons. Any repair or alteration to the device not carried out by the original supplier, will invalidate the warranty or guarantee. The product may only be used by persons who have read and understood these instructions. The device specifications may change without any separate prior notice to this effect.
Disposal instructions
Electrical and electronic devices may only be disposed of in accordance with the European WEEE Directive and not with household rubbish. Components must be disposed of or recycled separately as dangerous, toxic elements can inflict sustained damage on the environment if they are disposed of incorrectly. As a consumer, you are bound by the Electrical and Electronic Devices Act (ElektroG) to return electrical and electronic goods free of charge at the end of their useful life to the manufacturer, the place of purchase or to specially set up, public collection points. The details in each case are governed by national law. The symbol on the product, the operating instructions and/or the packaging refers to these regulations. By separating materials in this way, recycling and disposing of old devices, you are making an important contribution towards protecting our environment. For information on authorised collection points in your area, please contact your local city or municipal administration.
WEEE guideline: 2012/19/EU
WEEE register number: DE 67896761
WD Plus GmbH, herewith declares that this product 305384 conforms to the principle requirements and other relevant stipulations. The complete Declaration of Conformity can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hanover
Customer Support
CONTACT US
(UK) +49 511 / 13221 720
MO-FR 9:30am – 18pm CET
WD Plus GmbH
Wohlenbergstraße 16
30179 Hannover, DE
V1.3