TITANWOLF 304830 GRIFFIN Thrust Controller User Manual
- June 6, 2024
- TITANWOLF
Table of Contents
TITANWOLF 304830 GRIFFIN Thrust Controller
Thank you for choosing a product from TITANWOLF. Please read the following user manual carefully so that you can enjoy your purchased device for a long time.
Scope of delivery
- GRIFFIN Thrust Control
- User manual
Specifications
- USB port
- Ergonomically shaped
- Stable stand
- No drivers are required for the operation
- USB cable
System requirements
Operating system: Microsoft® Windows® 10 (32/64bit), Windows® 8.1, Windows® 8 (32/64bit), Windows® 7 (32/64bit)
Product details
- Force adjustment
- Rotary potentiometer – R axis Y
- 8-way switch (POV / HAT)
- USB connection (e.g. for a suitable joystick)
- Connection cable
- E button
- D button
- C button
- A Button
- B button
- Rotary potentiometer – R axis Y
Start-up
Take the device out of the packaging and remove all packaging material.
Connect the thrust controller to a free USB port on your computer. To use the
thruster you purchased, a driver installation is required. The driver
installation is completely utomatic due to Plug&Play. Once the installation is
completed, the device is ready for use. Note: You have the possibility to
connect a joystick, such as the „TITANWOLF VUL-TURE“ (https://www.titanwolf-
gaming.de/vulture) to the USB port of the GRIFFIN Thruster to use only one
USB port of your computer.
Botton assignment
Each button on the thrust controller can be individually assigned. To do
this, select the button assignment in the game you want to play and assign the
desired buttons accordingly.
Safety instructions and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid
contact with mains voltages. Do not short-circuit the product. The device is
not certified for use in the open air; only use it in dry conditions. Protect
it from high humidity, water and snow. Keep it away from high temperatures. Do
not subject the device to sudden changes in temperature or heavy vibration as
this might damage electronic components. Examine the device for damage before
using it. The unit should not be used if it has received an impact or has been
damaged in any other way. Please observe national regulations and
restrictions. Do not use the device for purposes other than those described in
the instructions. This product is not a toy. Keep it out of the reach of
children or mentally impaired persons. Any repair or alteration to the device
not carried out by the original supplier, will invalidate the warranty or
guarantee. The product may only be used by persons who have read and
understood these instructions. The device specifications may change without
any separate prior notice to this effect.
Disposal instructions
Electrical and electronic devices may only be disposed of in accordance with the European WEEE Directive and not with household rubbish. Components must be disposed of or recycled separately as dangerous, toxic elements can inflict sustained damage on the environment if they are disposed of incorrectly. As a consumer, you are bound by the Electrical and Electronic Devices Act (ElektroG) to return electrical and electronic goods free of charge at the end of their useful life to the manufacturer, the place of purchase or to specially set up, public collection points. The details in each case are governed by national law. The symbol on the product, the operating instructions, and/or the packaging refers to these regulations. By separating materials in this way, recycling and disposing of old devices, you are making an important contribution to protecting our environment.
WEEE guideline: 2012/19/EU
WEEE register number: DE 67896761
WD Plus GmbH hereby declares that the 304830/20200722TW014 is in compliance with the essential requirements and other relevant regulations. For a complete declaration of con-formity, please contact us: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hannover