TARAMPS LED 90 Switch Mode Power Supply Instruction Manual
- June 13, 2024
- TARAMPS
Table of Contents
TARAMPS LED 90 Switch Mode Power Supply
Product Information
- Product Name: LED 90
- Power Output: 1200 Watts
- Voltage: 12V
- Manufacturer: Taramps Electronics
- Website: www.taramps.com.br/pt/rede-de-assistencias-tecnicas
- Contact:
- Phone: (18) 3266-4050 / 99749-3391
- Email: assistencia8@taramps.com.br
- Address: CEP: 19.180-000
Product Usage Instructions
- Make sure to read the user manual carefully before installation.
- The LED 90 Power Supply is an automatic bivolt switched power supply.
- Connect the positive (+) cables to the battery or 12Volt equipment using the DC OUTPUT +V port (numbered as 3).
- Connect the negative (-) cables to the battery or 12Volt equipment using the DC OUTPUT -V port (numbered as 4).
- To avoid possible electric shock, it is recommended to ground the equipment using the GROUNDING port (numbered as 5).
- The LED ON indicator stays on as long as the power supply is connected to the mains.
- Ensure proper dimensions and weight for installation:
- Dimensions (WxHxD): 119x58x157mm (4.69×2.28×6.18)
- Weight: 0.69Kg (1.52lb)
Please note that Taramps Electronics reserves the right to modify the contents of the user manual without prior notice and is not obligated to apply the changes to previously produced units.
The installation of this product must be made by a qualified professional
Introduction
- Congratulations on your purchase of a Taramps product.
- It was developed in a modern laboratory and with the latest technology.
- This manual covers all features, operations and instructions to solve any doubt that may arise during the installation. Please take some time to read it carefully in order to ensure the proper installation and the use of all benefits that this product can offer.
- For questions, please call +55 (18) 3266-4050, e-mail support@taramps.com.br or visit www.taramps.com.br.
Presentation
- NEVER INVERT THE POLARITY of batteries that can be connected to the source output.
- This equipment has an “automatic bivolt” system – it automatically recognizes the voltage of the electrical power AC and adjusts itself to it. For the source to have the expected performance, the socket voltage must be between 90V to 140V (127V power AC) or between 190V to 250V (220V power AC).
- Install the source in a firm and ventilated place, preferably without sunlight and other sources of heat. Leave a space of 20 centimeters on the sides, not obstructing the cooler inlets.
- The source does not have internal parts that can be maintained by the user. Do not open it, risk of electric shock.
- The electrical power AC and the use of extensions must be adequate to support the desired power.
Term of warranty
- TARAMPS, located on Abilio Daguano Street 274, Res. Manoel Martins – Alfredo Marcondes, SP – Brazil, ZIP CODE 19180-000, guarantees this product against any defects on terms of project, making, assembling, and/or with solidarity, due to project vices which cause it improper or inadequate to its original use within 12 months from the date of purchase. In case of defect during the warranty period, TARAMPS responsibility is limited to the repairing or substitution of the device of its own making.
This warranty excludes:
- Damaged products by improper installation, water infiltration, violation by unauthorized individuals;
- Tamper or torn warranty seal;
- Cases in which the product is not used in adequate conditions;
- Defects caused by accessories, modifications or features attached to the product;
- The product with damage from falling, bumps or nature related problems (flooding, lightning, etc.);
- Warranty card is not properly filled or torn;
- Costs involving uninstallation, reinstallation of equipment as well as shipment to the factory;
- Damage of any kind, due to problems in the product, as well as losses caused by discontinued use of the product.
Technical assistance
- For international support, check on our website: www.taramps.com.br/en/rede-de-assistencias-tecnicas or contact direct the factory support:
- Phones: +55 18 3266-4050 / +55 18 99749-3391
- E-mail: service@taramps.com.br
Knowing the LED 90 Power Supply
The LED 90 Power Supply is an automatic bivolt switched power supply. It has a digital electronic circuit that controls and stabilizes its output, providing more security when connecting your LED strips, cctv security cameras, car audio, radio communicators, among others.
It has simple installation, not requiring any special connector.
- Maximum input power: 800W (1.5mm² recommended wiring).
- Output power in RMS = 500W continuous.
- Maximum power of Automotive Sound = 1200W RMS (60A Dynamic 4 seconds).
- Protection against output short circuit: Turns off the output if a short is detected or a load far above the permitted value is detected.
- Temperature Protection: Reduces power momentarily, returning automatically with a decrease in temperature.
- Output activation time: 300ms (average).
- LED ON: It stays on as long as the source / charger is connected to the mains.
- ADJ/VOLTAGE: Ajust the output voltage from 8V to 14.5V. For automotive battery recharge, it is recommended to set the output voltage greater than 13.8V.
- DC OUTPUT +V: To connect the positive (+) cables to the battery or 12 Volt equipment.
- DC OUTPUT -V: To connect the negative (-) cables to the battery or 12 Volt equipment.
- GROUNDING: To avoid possible electric shock, we recommend grounding the equipment
- POWER INPUT : Use a 1.5mm² cable. Power cable not included.
- COOLING FAN: The cooler remains on according to the power supply status: By current or temperature.
IMPORTANT: Never obstruct the fan and leave a 20cm space on the sides.
- Dimensions (WxHxD): 119x58x157mm (4.69″x2.28″x6.18″)
- Weight: 0.69Kg (1.52lb)
Taramps reserves the right to modify the contents of this document at any time without prior notice and does not have the obligation to apply the changes in units which were previously produced.
Manufactured by:
TARAMPS ELECTRONICS LTDA
CNPJ / TAX ID: 11.273.485/0001-03
www.taramps.com.br
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>