BEHRINGER BCH100 Bass Chorus Instructions
- June 13, 2024
- Behringer
Table of Contents
BEHRINGER BCH100 Bass Chorus
Product Information
The BEHRINGER BASS CHORUS BCH100 is an ultimate effects pedal designed for bass guitars. It offers high-performance features that provide a super thick chorus with an unbelievable stereo effect. The chorus effect slightly detunes the original signal, creating a pleasant detune effect relative to the pitch variation. This pedal is perfect for dispersing signals and enhancing your bass guitar sound.
Product Usage Instructions
CONTROLS
The BCH100 does not have an on/off switch. It automatically starts running
as soon as you insert the jack into the IN connector. When not using the
BCH100, remember to remove the jack from the IN connector to extend the
battery life. The serial number can be found at the bottom of the pedal.
WARRANTY
For current warranty terms, please refer to the BEHRINGER website at
http://www.behringer.com.
SPECIFICATIONS
- In Connector Impedance: 1/4 TS 500 kW
- Out A Connector Impedance: 1/4 TS 1 kW
- Out B Connector Impedance: 1/4 TS 1 kW
- Power supply: 9 V, 100 mA DC regulated
- Power connector: 2 mm DC jack, negative center
- Battery: 9 V type 6LR61, 30 mA approx.
- Power consumption: 100 VAC adaptor Japan, PSU-SB-SAA BEHRINGER 240 VAC adaptor Australia, PSU-SB-UK BEHRINGER 240 VAC adaptor UK, PSU-SB-UL BEHRINGER 115 VAC adaptor USA
- Dimensions (H x W x D): 54 mm (2 1/8) x 70 mm (2 3/4) x 123 mm (4 4/5)
- Weight: approx. 0.33 kg (0.73 lbs)
Please note that BEHRINGER may make modifications to the product without prior notice, resulting in differences in specifications and appearance.
SAFETY INSTRUCTIONS
- Do not use near water or heat sources.
- Use only authorized attachments/accessories.
- Do not attempt to service the product yourself. Contact qualified servicing personnel for repairs or servicing, especially if the power supply cord or plug is damaged.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
- Responsible party name: MUSIC Group Services USA, Inc.
- Address : 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA
- Phone: +1 425 672 0816
- Fax: +1 425 673 7647
The BASS CHORUS BCH100 complies with Part 15 of the FCC rules, which state that it must not cause harmful interference and must accept any interference received, including interference that may cause undesired operation. Any changes or modifications to the equipment not approved by MUSIC Group can void the user’s authority to use the equipment.
For more information, visit behringer.com.
Thank you for showing your confidence in us by purchasing the BEHRINGER BASS CHORUS BCH100. This ultimate effects pedal is specifically designed to match the range and applications of bass guitars. Thanks to its high-performance features you get a super thick chorus with unbelievable stereo effects. The chorus effect slightly detunes the original signal. A very pleasant detune effect is created relative to the pitch variation. The chorus effect is often used for dispersing signals.
- The LEVEL control adjusts the output level.
- The SHAPE control lowers the amount of ultra-low frequencies in the effect signal to achieve more defined tone and avoid muddiness of sound.
- The RATE control determines the chorus effect speed.
- Turn up the DEPTH control to achieve a more full and deeper effect sound.
- The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.
- Use the footswitch to activate/deactivate the effect.
- Use this 1/4″ TS IN connector to plug in the instrument cable
- The two 1/4″ TS connectors OUT A and OUT B send the signal to your amp. Use both connectors if you want to achieve a full stereo-chorus effect. For mono use just plug in OUT A.
Use the DC IN connection to plug in a 9 V power supply (not included). The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
If The BCH100 has no on/off switch. As soon as you insert the jack into the IN connector, the BCH100 begins running. When not using the BCH100, remove the jack from the IN connector. This extends the life of the battery. The SERIAL NUMBER is located at the bottom.
WARRANTY
For our current warranty terms, please refer to our website at
http://www.behringer.com.
SPECIFICATIONS
In
- Connector: 114″ TS
- Impedance: 500 kg
Out
- Connector: 1/4″ TS
- Impedance: 1 kg
Power supply
- 9 V, 100 mA DC regulated
- PSU-SB-CN BEHRINGER 220 VAC adaptor China
- PSU-SB-EU BEHRINGER 230 VAC adaptor Europe
- PSU-SB-JP BEHRINGER 100 VAC adaptor Japan
- PSU-SB-SAA BEHRINGER 240 VAC adaptor Australia
- PSU-SB-UK BEHRINGER 240 VAC adaptor UK
- PSU-SB-UL BEHRINGER 115 VAC adaptor USA
- Power connector: 2 mm DC jack, negative center
- Battery: 9 V type 6LR61
- Power consumption: 30 mA
- Dimensions (H x W x D): approx. 54 mm (2 1/8″) x 70 mm (2 3/4″) x 123 mm (4 4/5″)
- Weight: approx. 0.33 kg (0.73 Ibs)
SAFETY INSTRUCTIONS
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service the product yourself. Contact our qualified servicing personnel for servicing or repairs. especially when the power supply cord or plug is damaged.
Technical specifications and appearance are subject to change without notice. The information contained herein is correct at the time of printing. The names of companies, institutions, or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER® nor affiliation of the trademark owners with BEHRINGER®. BEHRINGER® accepts no liability for any loss that may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Colours and specifications may vary slightly from product. Products are sold through our authorized dealers only. Distributors and dealers are not agents of BEHRINGER® and have absolutely no authority to bind BEHRINGER® by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registeredtrademark. ALL RIGHTS RESERVED. © 2005 BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany. Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
- Responsible party name: MUSIC Group Services USA, Inc.
- Address : 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA
- Phone: +1 425 672 0816
- Fax: +1 425 673 7647
BASS CHORUS BCH100 complies with the FCC rules as mentioned in the following paragraph:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by MUSIC
Group can void the user’s authority to use the equipment.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>