FrSky FWTM Wireless Trainer Module Lite Instruction Manual
- June 13, 2024
- Frsky
Table of Contents
FrSky FWTM Wireless Trainer Module Lite
Product Information
The FrSky FWTM Lite Module is a wireless trainer control module designed for radio control enthusiasts. It allows for wireless connection between a master radio and a student radio, providing low latency and a seamless training experience. The module is compatible with Lite Type Module Bay and supports both ACCESS and ACCST D16 modes. With its compact dimensions of 62.4mm (length) x 30mm (width) x 14.5mm (height) and a weight of 18.5g, it is lightweight and easy to install on compatible radios.
Specifications:
- Frequency: 2.4GHz
- Dimension: 62.4mm x 30mm x 14.5mm (L x W x H)
- Weight: 18.5g
- Operating Voltage Range: 6.5-8.4V
- Operating Current: 15mA at 7.4V
- Compatible with Lite Type Module Bay
Features:
- Wireless Trainer Control with Low Latency
- Supports wireless connection to student radio with FWTM Lite module attached on master radio via audio port
- Smart-Matched ACCESS & ACCST D16 Modes
Introduction
The FWTM Lite trainer module is an alternative option for pilots who do not have the radio with the PARA trainer system but still expect to use the trainer system remotely. Power the trainer module by attaching it to the radio module bay, now the student radio can bind the trainer module in ACCST or ACCESS mode and work at low latency, so a simple wireless trainer system build is completed very quickly. By plugging an Audio type trainer cable into the trainer module, this module system also provides a wired way to create wireless connections between master and student radios.
Overview
Specifications
- Frequency: 2.4GHz
- Dimension: 62.43014.5mm (LWH)
- Weight: 18.5g
- Operating Voltage Range: 6.5-8.4V
- Operating Current: 15mA@7.4V
- Compatible with Lite Type Module Bay
Features
- Wireless Trainer Control with Low Latency
- Supports wireless connection to student radio with FWTM Lite module attached on master radio via audio port.
- Smart-Matched ACCESS & ACCST D16 Modes
LED State
ACCESS
| Green LED | Blue LED (Lite TYPE) | Status |
|---|---|---|
| On | On | Register |
| Flash | Flash | Register successfully |
| On | On | Bind |
| On | Off | Bind successfully |
| On | Off | Working normally |
| Off | On | Failsafe |
ACCST D16
| Green LED | Blue LED (Lite TYPE) | Status |
|---|---|---|
| On | On | Bind |
| Off | Flash | Bind successfully |
| On | Off | Working normally |
| Off | On | Disconnect |
Operation steps
ACCESS Mode:
- Set the master radio/trainer module to [Reg] mode.
- Turn on the student radio and navigate to Menu-Model Setup-Page 2. Choose Internal or External RF and select [Reg].
- Press and hold the binding button on the trainer module while turning on the master radio. The blue and green LEDs on the trainer module will light up, indicating that it en tered [Reg] mode. On the student radio, select [ENTER], and the blue and green LEDs on the trainer module will blink with the student radio displaying [Registration ok].
- Turn off the trainer module.
- Move the cursor to the [Bind] option for selecting Receiver 1.
- Turn on the trainer module, and the green LED will blink, indicating it entered [Bind] mode. Choose the module, and the green LED will remain lit, with the student radio displaying [Bind successful].
- The trainer module exits [Bind] mode, and the green LED will stay lit, while the blue LED will turn off, indicating normal operation.
- Select Master/SBUS Module for wireless trainer mode.
- Enable the wireless trainer function on the radio and set a switch.
- Choose Enable to complete the setup.
ACCST D16 Mode:
- Press and hold the binding button on the FWTM module while turning on the master radio. Release the button. The blue LED on the FWTM module will flash, and the green LED will light up, indicating that the trainer module is ready to be bound with the student radio.
- Turn off the master radio.
- Turn on the master radio. The steady green LED on the trainer module indicates that the module is receiving commands from the student radio. Unless one of the devices is replaced, there is no need to repeat the binding process between the receiver and the master radio module.
- Select the Master/SBUS Module for wireless trainer mode.
- Enable the wireless trainer function on the radio and set a switch.
- Choose Enable to complete the setup.
Wired connection method
- Please connect the audio port of the module to the audio port of master radio and power the module.
- Please change the trainer mode of the radio used for binding with the module to Master/Jack.
FrSky is continuously adding features and improvements to our products. To get the most from your product, please check the download section of the FrSky website www.frsky-rc.com for the latest update firmware and manuals.
FrSky Electronic Co., Ltd. www.frsky-rc.com
Contact us: frsky@frsky-rc.com
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi,
214125, Jiangsu, China Technical Support:
sales4tech@gmail.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>