BDFFLY B1BW4u8mP3L Wireless HDMI Transmitter and Receiver User Manual
- June 13, 2024
- BDFFLY
Table of Contents
BDFFLY B1BW4u8mP3L Wireless HDMI Transmitter and Receiver
Product Information
The HDMI Wireless Extender is a device that allows you to transmit high- definition video and audio signals wirelessly from a source device to a display device. It supports HDMI 1.3 standard, with a pixel bandwidth of 165MHz and a total bandwidth of 6.75Gbps. The maximum resolution supported is 1920×1080 at 60Hz. The extender consists of a transmitter (H-1) and a receiver (R-1) that need to be connected to the respective source and display devices. It operates on a 5GHz frequency and has a maximum distance of 30m in an open environment, although it is recommended to use it within 10m for optimal performance. The extender comes with a DC 5V power adapter and has a power dissipation of up to 2W. It can operate within a temperature range of -5°C to +70°C and a humidity range of 5% to 90%. The product is covered by a 1-year free warranty.
Package List
- HDMI Wireless Extender
- HDMI Wireless Extender Warranty Card
Product Usage Instructions
Installation
- Connect the receiver HDMI to the TV.
- Connect the powered USB port (5V/1A) to the receiver.
- Connect the transmitter HDMI to the signal source.
- Connect the powered USB port (5V/1A) to the transmitter.
- Wait for a few seconds until the lights stop flashing and the screen will be mirrored automatically.
Matching Setting
Attention: Perform the following steps if the Wireless HDMI Extender
cannot match.
Receiver Pairing Mode
- Plug the USB end of the receiver into the power source.
- Connect the HDMI end of the receiver (5V-1A) to your monitor.
- Poke the Reset hole on the HDMI side of the receiver for 2 seconds until “Release the button to pair with Mate” appears on the screen. Then release the button.
- To restore factory settings, press and hold the Reset hole for 10 seconds.
Transmitter Pairing
- Connect the transmitter to the computer and ensure it’s powered.
- Wait for the display to show “Ready to pair”.
- Use a pin to press and hold the HDMI Reset hole for 5 seconds until the light goes off to complete pairing.
Warranty
Thank you for using this product. The company provides a 1-year warranty
and lifetime maintenance after-sales service. During the warranty period,
customers will receive free maintenance services for hardware failures caused
by the product’s quality. Please keep the user manual in a safe and easily
accessible place for immediate reference. Follow the safety instructions
provided:
- Do not disassemble the product yourself as it does not have a DIY function.
- Avoid exposing the product to water as it is not waterproof.
- Clean the product surface using a dry cloth.
- Avoid using the product in excessively humid or hot environments.
- Avoid contact with corrosive substances.
If the product is damaged or experiences physical damage, please stop using it and contact customer service for support.
Specifications
Video
| Standard HDMI| HDMI 1.3
Pixel bandwidth| 165MHz，digital signals
Interface bandwidth| HDMI total bandwidth：6.75Gbps
Max resolution| 1920*1080@60Hz
Interface type| HDMI-A
WI-FI| 5GHz
Distance| ≤30m（Open environment）,Best use within 10m
Other
| Power| Adapter:DC 5V
Power dissipation| MAX 2W
Temperature| Operating: -5℃ ~ +70℃
Humidity| Operating: 5% ~ 90%
The warranty| 1 year free warranty
Package list
- HDMI Wireless Transmitter 1pcs
- HDMI Wireless Receiver 1pcs
- User Manual 1pcs
- Warranty Card 1pcs
Interface specification
How to install
- Connect the receiver HDMI and TV, and connect the powered USB port (5V/1A)
- Connect the transmitter HDMI and signal source, and connect the powered USB port (5V/1A), wait for a few seconds and then the lights will stop flashing, and the screen will be mirrored automatically.
Matching setting
Attention : When the Wireless HDMI Extender cannot match, please do the following.
Enable receiver pairing mode
- Plug the USB end of the receiver into the power source.
- Connect the HDMI end of the receiver (5V-1A) to your monitor.
- Poke the “Reset” hole on the HDMI side of the receiver for 2 seconds until “Release the button to pair with Mate” appears on the screen. Then release the button.
- If you want to restore factory settings, press and hold the “Reset” hole for 10 seconds.
Press the pair button on the transmitter
- Connect the transmitter to the computer and ensure it’s powered.
- Wait for the display to show “Ready to pair”, then use a pin to press and hold the HDMI Reset hole for 5 seconds until the light goes off to complete pairing.
Warranty
Thank you for using this product. In order to protect your rights, please read
the following protection terms carefully: We provide a 1-year warranty and
lifetime maintenance after-sales service for this product. During the one-year
warranty period from the time of purchase, the company will provide customers
with free maintenance services due to hardware failures caused by the quality
of the product itself.
Please keep the user manual in a place that is safe and easy to find so that
you can read it immediately when you encounter problems.
safety instruction
- Please do not disassemble this product by yourself because it doesn’t include a DIY function;
- Please don’t make the product touch water in case damaged, because it is not waterproof design;
- Please use dry cloth material when cleaning the product surface;
- Please do not use this product in environments that are too humid or too hot;
- Please avoid contact with corrosive substances.
- When there is damage or other physical damage to the product, please stop using it and contact with customer service to get support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>