hp 9130b series Office Jet Pro Colour Inkjet Printer User Guide

June 13, 2024
HP

Reference Guide HP OfficeJet Pro
9130b series

Control Panel

  1. Status center
    Touch to display printer status.

  2. Copy settings

  3. Function buttons
    Touch to perform common tasks.

Printer Features

Front

  1. Control panel

  2. Power button

  3. Power light and Wi-Fi light

  4. Document feeder

  5. Cartridge access door

  6. Front door

  7. Output tray

  8. Input tray
    Back

  9. Fax ports

  10. USB port

  11. Ethernet port

  12. Power cord port

Help and tips for Wi-Fi and connectivity
If the software is unable to find your printer during setup or post setup, check the following conditions to resolve the issue.
Reset Wi-Fi (setup mode) During initial setup:
If the blue Wi-Fi light is not blinking, the printer might not be in Wi-Fi setup mode. Check the control panel and select “Resume Setup”, if prompted. During printer use, Wi-Fi disconnects:

  1. On the control panel, touch Menu > Settings > Network. Scroll to Restore Network Settings and touch Restore.
  2. Wait for printer to scan for Wi-Fi networks. Choose your network, enter the password, and connect.
  3. If applicable, open HP software and add the printer again.
Other Potential Issues Solution
Computer or mobile device too far from printer Move your computer or mobile

device closer to the printer. Your device might be out of range of the printer’s Wi-Fi signal.
Computer connected to a Virtual Private Network (VPN) or remote
work network| Disconnect from a VPN before installing HP software. You can’t install apps from the Microsoft Store when connected to a VPN. Connect to the VPN again after finishing printer setup.
Note: Consider your location and the security of the  Wi-Fi network before disconnecting from a VPN.
Wi-Fi turned off on computer (computer connected by Ethernet)| If your computer is connected by Ethernet, turn on the computer’s Wi-Fi while setting up the printer.
Disconnect the Ethernet cable temporarily to complete setup over Wi-Fi.
Bluetooth and location services are turned off on your mobile device| If setting up with a mobile device, turn on Bluetooth and location services. This helps the software find your network and printer.
Note: Your location is not being determined and no location information is being sent to HP as part of the setup process.

Help and Support
For printer troubleshooting and videos, visit the HP support site. Enter your model name to find the printer.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

https://www.hp.com/support/?utm_source=qr&utm_medium=guide
hp.com/support
The information contained herein is subject to change without notice.
© Copyright 2023 HP Development Company, L.P. Printed in Thailand

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals