HYEKU B09HZG7CQC X3 Wireless Mechanical Keyboard User Guide

HYEKU B09HZG7CQC X3 Wireless Mechanical Keyboard

Product introduction

The user interface and other illustrations of the product accessories in the manual are all schematic diagrams, which are only for reference. Due to the update and upgrading of the product, the actual product may be slightly different from the schematic diagram. Please refer to the actual product.

1. “One-key double Function “key (Fn combination key)
2. Self-locking hand rest
3. Fn Key
4. USB cable
5. Tripod
6. Type – c interface
7. Receiver
8. Power switch

Schematic diagram of assembly and disassembly for keyboard hand rest

Assembly instructions of keyboard hand rest

1. Grasp the middle end of the hand rest and align it with the keyboard lock slot, push it in slightly, and hear a “click”. Indicates that the keyboard has been locked.
   

2. The effect of Complete assembly.

Disassembly instructions of keyboard hand rest

1. Grasp the middle of the hand rest and push it forward slightly, and then quickly pull it out after hearing a “click”. Remove the hand rest.
   

2. The effect of complete disassembly.
   

Installation instructions

2.4G mode

1. Turn on the power switch on the back of the keyboard
   

2. Take out the 2.4G wireless receiver
   

3. Plug the receiver into the USB port of the computer
   
   ※ After connecting to the computer, the system automatically detects the 2.4G device and installs it by itself. It can be used after the installation is successful.

For good 2.4g wireless performance, plug the USB wireless receiver into the USB port on the PC front panel or connect through a USB extension cord to bring the USB wireless receiver closer to the keyboard.

Wired mode

1. Connect the “TYPE-C” of the data cable to the keyboard.

2. Insert the USB connector into the USB port of the computer.

※ After connecting to the computer, the system will automatically detect the USB device and install it by itself. After successful installation, the user will be prompted to use the current device.

FN combination function keys

• Keep pressing 3S to restore factory default

• Volume –

• Prev song

• Backlight interactive mode cycle switch

• Custom light clearing (long press 3 seconds)

• Win lock

• Volume +

• Play / Pause

• Backlit breathing mode

• Custom light mode

• Custom light mode

• Mute

• Next song

• backlight constant brightness mode

• Full light switch

Custom lighting mode: Short press FN + END to bring up the current custom light, and then long press FN + END 3S indicator lights CAPS and SCRLK and the END button to flash, then enter the custom light effect mode. At this time, press the required key to modify the on-off and on-on status of the corresponding LED, and press FN + END to save and exit.

• Adjust the backlight brightness – brighter
  

• Adjust the speed of backlight change – fast
  

• Adjust the backlight brightness – dimming

• Lock all keys
  When the keyboard is locked, the “F12” button light is flashes

• Adjust the speed of backlight change – slow

Charging instructions

The USB cable will automatically charge when connected to the computer. The “Fn key” light flashes when charging, and the “Fn key” light follows the current light mode when fully charged. In wireless mode, if the battery is low, the “Fn key” light will flash, please connect to the USB cable for charging.

Basic specifications

• Keyboard type: Dual-mode mechanical keyboard
• Switch: Kailh upgrade BOX Switch ( Hexgears custom-made )
• Switch life: 100 Million Cycles
• Report Rate: 1000HZ ( Wired mode )
• Backlight: Monochromatic
• Function: FN combination function key
• Attended mode: 2.4G / Wired
• Voltage / Current: 3.7V / 300mA
• Keypad: 87 key/Anti-ghosting ( Wired mode )
• Supporting: Windows all/Mac OS/Android
• Battery capacity: 2300mah
• Cable Material: USB Cable braided wire
• Weight: 920g
• Size: 357 x 133 x 37 mm

The name and content of the hazardous substance in the product

Warning

If any liquid enters the product , please immediately disconnect from the computer and remove the product. Continued use may cause fire or electric shock, please contact the agent for inspection and maintenance.
Check the product shell regularly for any damage, maintenance operations are outside the scope of product compliance requirements.
Disassembly, replacement of parts , modification or modification without express approval will cause the user to lose the right of operating the equipment and the warranty failure.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>