Bear DRG-C12U1 Multi Purpose Electric Heating Pot User Manual
- June 13, 2024
- BEAR
Table of Contents
Bear DRG-C12U1 Multi Purpose Electric Heating Pot
IMPORTANT INFORMATION
Before using the product, please read this instruction manual carefully and
keep it properly!
This product is for use only in homes or similar places.
Product executive standard: GB 4706.1-2005 GB 4706.19-2008 GB 48
Precautions
Please read the “Safety Precautions” carefully before use, and use it in the correct way to avoid damage or danger caused by improper use. Please read the text of the instruction manual after understanding the content of this part, and keep it properly after reading, so that all users of this product can refer to it at any time.
- This product is a Class I appliance, please make sure that the socket is grounded effectively before use. At the same time, please confirm that the input voltage is 220V~S0HZ.
- It is strictly forbidden to use the flexible cord to move the socket, and it is strictly forbidden to share a plug with other electrical appliances.
- If the power cord is damaged, in order to avoid danger, the manufacturer, its maintenance department or similar Replaced by professionals in the department.
- The pot body is a hardware product. Please be careful during use to avoid damage. If you find cracks or breaks in the pot body, please stop using it to avoid danger.
- During use, if there is a problem Please unplug the power plug from the socket first; do not pull or insert the plug with wet hands to avoid electric shock.
- Do not pull the line along the pointed object or sharp edge, press the line or let it hang down, and keep away from the heat source.
- Do not insert metal or other foreign objects into the heat dissipation hole or gap, otherwise it may cause damage or electric shock hazard.
- Do not place this product on the surface of a heat source or near a heat source, such as a cooker, an oven, etc.
- It is forbidden to use this product on an unstable or inclined table to avoid accidents such as injury or fire caused by dumping of the product.
- If there is no water in the pot, please do not dry it, otherwise the product will reduce the service life; if this product Due to lack of water and overheating, the temperature control device will automatically stop heating and the product will stop working; to ensure safety, please unplug the product and wait for the product to cool down before continuing to use it.
- This product is not suitable for children, mentally ill or inexperienced People who use or play this product, to ensure safety, can use it unless it is under the guidance of a person who is familiar with the operation of this product.
- Please do not immerse the power cord, plug, whole machine, etc. in water or other liquids to avoid damage to the product and electric shock.
- The product is forbidden to be sprayed with water to avoid short circuit, electric shock and other hazards.
- Before the product is filled with water, cleaned, or when it is not in use, please turn off the power and unplug the power plug. Wait for the product to cool down before cleaning.
- When the water boils, the high-temperature steam may easily cause burns. Be careful not to approach the direction of the steam outlet.
- During the use of the product, it is a normal phenomenon that the pot body becomes hot. When water is poured, you can only lift the pot body by the handle. Do not touch the hot surface of the pot body with your hands to avoid burns.
- When filling water, do not exceed the maximum water level mark. If the water is too full, water may spray out when the water boils. 18. This product is only used on the base provided.
Words from Little Bear
Component installation diagram
Remarks: The product picture is for reference only, and the actual product shall prevail.
Main feature
- Fashion appearance, exquisite craftsmanship.
- Microcomputer control, with appointment function.
- It has 8 functions such as noodle cooking, hot pot, dessert, porridge, steaming, soup, and porridge.
- Use a heating plate to generate heat.
- The product adopts a separate structure design.
- Touch buttons, easy to operate.
- Stainless steel pot body, fashionable and novel.
control panel
Confirm/Cancel key: After the power is turned on, the product enters the
standby state. After the function is selected, the machine presses the
confirm/cancel key and the machine starts to work, or enters work after 10
seconds. Press the confirm/cancel key again during the working process, and
the product enters standby state.
Function selection key: In the function selection state, press this key
to select the function to be used. After the required function is selected,
the indicator light of the corresponding function flashes. If there is no
other operation, the product will automatically start working after 10
seconds, and the indicator light will be long .
Bright power adjustment key : After selecting the function, press this
key to change the heating power of the product (selected between 100-600W,
divided into 6 levels) or after the product starts working, press this key to
change the heating power of the product, if If you don’t press this key, the
product will work according to the programmed power.
Appointment key: In the standby state, press the appointment key to enter
the appointment mode, after setting the appointment time, press the function
key to select the function, so that the product can start working after the
appointment time is set.
For example, if the product starts to cook soup after one hour, press the appointment button to select the time as 1:00, and then press the “function button” button to select the soup function, so that the product will automatically start working after one hour.
Standby status: turn on the power, the product beeps once, the display
shows “—” .
Function selection Status: turn on the power, enter the function
selection, select.
Working status: The corresponding function indicator is always on, the
heating tube is heated, and the display shows the remaining time of the
heating function.
After starting the “reservation” function: during the reservation process, the
corresponding function indicator light is on, and the reservation time is
displayed on the display screen in a countdown mode. After the time is reset
to zero, the product enters the working state.
End of work: When the work of the product is over, the product enters the
insulation function.
Instructions
Reminder:
Before using this product for the first time, fill it with water to the
highest water level. After boiling, pour it out and rinse with cold water.
Repeat the operation twice.
- Put all kinds of ingredients that need to be stewed in the stainless steel pot body and add an appropriate amount of water, cover the glass lid, and then place the pot body on the base.
1. The water put in can not be lower than the minimum water level, and
should not exceed the maximum water level.
2. Please be sure to place the pot body on the base, and there should be
no other objects or foreign objects between the pot body and the base,
otherwise the product will not work normally
3. When cooking noodles, porridge, desserts or some frothy soups, the
glass cover can be removed after the water is boiled, and then stirred
appropriately to prevent overflow.
- After the product is powered on, the machine automatically enters the standby state, press the “function” key to enter the function selection state.
- Press the “function” button, the indicator corresponding to the selected function flashes (if you need to adjust the firepower or make an appointment, you can press the “firepower adjustment” or “appointment” button to set the required time, if you need to set both. You need to set the firepower adjustment first, and then make an appointment setting). If there is no other operation within 10 seconds, the product will automatically start to work.
- During the working process, press the “confirm/cancel” button again to cancel the work and return to the standby state.
- After the product is finished working, the product makes a beeping sound. The product automatically enters the heat preservation state or ends work, and the food can be eaten.
Tips:
The hot pot function is to directly end the work, the hot pot function is to
heat at full power, and the heat preservation state of other functions is
maintained for 2 hours. When the time is over, the display shows .. —.. , the
machine works.
Care and maintenance
- Before cleaning and maintenance, be sure to unplug the power plug and wait for the body to cool down before cleaning.
- When cleaning, please do not immerse this product in water for cleaning, and do not use corrosive detergents and neutral detergents.
- Do not use banana water, gasoline, decontamination powder, hard brush or stainless steel wire ball to wipe, so as not to damage the surface.
- Scale is a quality deposit formed naturally when water is heated. It often adheres to the inner wall of the pot body and the heading plate, which will affect the service life of the product. In normal use, it is generally descaled once every 2 months (according to local Depending on the water quality). 5. When the product is not used for a long time, please clean it, put it in the packing box, and put it in a ventilated and dry place to avoid moisture and influence the use.
Common problem analysis
| Failure phenomenon | Cause analysis | Troubleshooting |
|---|
After pressing the “confirm/cancel” key to enter work, the machine does not
respond and does not enter the function selection state| Possible control
circuit failure| Please contact the dealer or our company’s service point for
repair
The product is heated from the beginning to the completion, the pot has never
reached a boiling state| It may be used in plateau areas or temperature sensor
failure
After the power is turned on, the ma- chine has no display and no buzzing
sound| Possible circuit failure
Power plug is not plugged in| Confirm that the power plug is in place
After the power is turned on, the leak- age switch trips| Possible circuit
failure| Please contact the dealer or our company’s service point for repair