TEiNNoNa QR TV-tevac Industrial Liquid And Dust Vacuum Cleaner User Manual

Industrial vacuum cleaner for liquids and dust user manual

QR TV-tevac Industrial Liquid And Dust Vacuum Cleaner

introduction
Dear Client:
Thank you for placing your trust in a quality product from TEINNOVA.
This product has been made using modern manufacturing techniques and thorough quality assurance measures.
We do everything possible to ensure that you are satisfied with this product and can operate it without any issues. Should you have any questions about this product, please contact your dealer or contact the company directly.
Before starting up the machine, carefully read the instructions for use of your equipment.
Treat this manual as part of the machine and always keep it nearby for future reference.
Training service
We offer the option of providing companies with training specific to our products as well as teaching their operators how to provide the best service and thus contribute to the success of their end customers. Aspects such as knowing how to prepare a fair and objective quote, to respond to specific problems that may arise, or to offer a more professional and efficient service.
Technical service
Because we manufacture our own cleaning equipment we can control at all times the quality and performance of every machine we manufacture, and this is what has allowed us to maintain low-cost service rates which have always been resolved by our own Technical Support Service who are managed by the same team as our factory, and in a short space of time. We have all kinds of spare parts for your equipment, as well as related accessories.
© This instruction manual is protected by copyright. We reserve all rights, especially the rights to produce, translate and prepare it using electronic systems.

Symbols used

All the symbols used in this manual, as well as those on the equipment, are explained in this section.
It is important to read the text associated with these symbols carefully, since it is about personal safety and equipment safety.

| DANGER!
This symbol warns you of a potentially dangerous situation that could result in serious injuries or death if instructions are not be properly followed. Make sure you read all the instructions in the “Safety information” section.
---|---
| WARNING!
This symbol warns you of a potentially dangerous situation that could result in minor or moderate injuries, or property damage resulting in injury to people if instructions are not properly followed.
| ATTENTION!
This symbol warns you of a situation that may cause damage to property, without causing injury, if the instructions given are not followed properly.
| IMPORTANT!
This symbol alerts you to information about the best way to use the equipment avoiding any possible improper operation.

Safety warnings

All power conduction parts must be protected agains water.
SHORT-CIRCUIT RISK.
All jobs performed on the appliance, both routines and extraordinary, must always be done with the plug disconnected from the power supply.
Operation with a residual current circuit breaker provides extra protection for the operator (In=30 mA).
Only ever use the appliance for the purposes for which it hase been designed and manufactured.
ACCIDENT RISK.
In case of leakes of liquids, foams, etc., turn the appliance off straight away.
Do not leave the machine running and unguarded nor within reach of children, animals or persons that are not responsible for their own actions. ACCIDENT RISK.
Do not vacuum inflammable combustion substance (eg: hot ashes), explosive and toxic substances, electrostatic or substances that are dangerous for health. EXPLOSION OR POISONING HAZARD.
Do not rest the vacuum inlet on or move this cose to delicate parts of the body (eyes, ears, mouth, etc.). ACCIDENT RISK.
Never use the machine in case of uncertainty or faults of any kind l, including those not mentioned in this manual.
Do not open the control box of your TEVAC extraction system.
In the event of a fault, please contact TEINNOVA’s technical support +34 941 44 50 56.

Intended conditions of use

The TEVAC machine has been designed and manufactured for the suction of dust and liquids, and should not be used for other purposes.
Any other use is strictly prohibited without the written permission of the manufacturer.
The machine may only be operated by authorised and properly trained personnel.

Know your equipment

DRY CLEANING A Motor fan
B Floater support
C Polyester filter
D Body
E Vacuum nozzle
F Flexible hose
I Flat tool
L Brush
M Extension – two pieces
N Multipurpose tool body
O Floor accessory
P Accessory for liquid
Y Floater
W Basket (Optional)

WET CLEANING A Motor fan
B Floater support
D Body
E Vacuum nozzle
F Flexible hose
I Flat tool
L Brush
M Extension – two pieces
N Multipurpose tool body
O Floor accessory
P Accessory for liquid
Z Sponge filter for liquid
Y Floater
W Basket (Optional)

DRY CLEANING WITH HEPA FILTER A Motor fan
B Floater support
C Polyester filter
D Body
E Vacuum nozzle
F Flexible hose
I Flat tool
L Brush
M Extension – two pieces
N Multipurpose tool body
O Floor accessory
P Accessory for liquid
Z HEPA filter
Y Floater
W Basket (Optional)

Accessories

Accessories included:Optional accessories: HEPA FILTER
Vacuum cleaner filter with a filtering capacity of small particles much higher than a conventional filter.
CODE: AC3101151

Operating instructions

1. Keep the ventilation areas and do not place objects, wrappings or anithing else on the machine before starting or during operation.
2. Reset the machine on a sound and stable surface.
3. Start the required machine operation by pressing the appropriate switch (start motors, start extractor, power socket command for electric tool, etc.).
4. Check the position of the filter and head-tank fastening hooks. Wrong filter positioning can cause serious damage to the machine.
5. Fit the hose to the vacuum connector (see fig. 1), fit the required accessory to the end of the hose (see fig.2).
6. Connect the power cable of the appliance to the power socket with switches on “0” (OFF POSITION).
7. To vacuum liquids, empty the dust from the container and remove the cloth filter. This operation must be only be performed on models designed to vacuum liquids.
8. Important: only refit the cloth filter to vacuum dusts, so as not to cause problems to the appliance.

ATENTION

• The appliance features a floating valve that interrupts vacuum when the tank is full. Switch off the appliance and empty the tank.
• Do not use the appliance in case of malfunction, bad operation, electrical parts non properly insulated. If necessary, contact your authoryzed dealer.
• Check regularly the power cable and if it is damaged, please contact the manufacturer or the authorized technical service for the replacement.

CHANGE OF FOAM FILTER TO HEPA FILTER

1. Release the side locks of the unit and separate the upper part from the lower part.

2. Remove the basket by turning to the left and lifting.

3. Remove the foam filter.

4. Release the four screws of the float support and remove it.

5. Hold the float.

6. Place the support that comes with the Hepa filter on the float and screw it again.

7. Carefully place the hepa filter on the support.

8. Tighten the filter by means of a knob on the upper part.

9. Place the basket that we had previously removed and fix it by turning it to the right.

Transport

The machine has been designed to be transported in any vehicle.
Your TEVAC has handles for grip and transport.
The machine can only be transported in its working position (vertical).
The machine is firmly attached to the vehicle chassis.
It is not advisable to place the machine on a transport pallet or similar.
The machine must rest on a completely flat and horizontal surface.
The machine must be transported in the working position. Never in a lying position.

Maintenance and care

• Keep the equipment in a place protected from weather factors.
• Clean the machine after each job to keep it in perfect condition.
• Remove and clean the suction filter periodically as shown in fig. 4.
• The cloth filter can be washed in water and detergent; before using, it must be dry.
• Replace the vacuum filter in the event of holes, cuts or faults in general.
• Check and release obstructed parts (suction tube, brushes, etc.)
• If necessary, clean the tank and in any case, never leave dust or liquid residues in the tank for long periods.

ATENTION
Holes and/or cuts on the sides of the filter could allow transit of materials and become the cause of serious damage to the appliance. Put the covers on the machine if it is not going to be used for a while, as well as during transport.
In case of an acoustic signal, check the saturation status of the filters.
Maintenance operations:

• Cable check:
  Disconnect the plug before cleaning or servicing. Examine it carefully before use to make sure it is OK.
  If the cord is broken or damaged, it must be replaced or repaired by TEINNOVA’s service department.

• Watch the bag:
  Wash the dust bag with warm water and a cleaner and dry it after use, it is forbidden to use the dust bag when it is wet.
  It is recommended that the dust bag be replaced no more frequently than every 3 years.

Spare parts:
TEINNOVA has spare parts for all machine parts as well as consumables for all maintenance tasks indicated in this manual.
If you need any parts or consumables, please contact TEINNOVA’s Customer Service at
+34 941 44 50 56.

Waste management

The materials used in the packaging are recyclable. Do not dispose of the packaging in household waste, but hand it in at official collection points for recycling.
Do not dispose of electrical equipment in the trash!
We recommend that electrical tools and accessories are subjected to an environmentally friendly recovery process.
Please dispose of the materials in the appropriate container or go to your local collection point.
Directive 2012/19/EU of 4 July 2012 on waste electrical and electronic equipment (WEEE).

Troubleshooting guide

it up again.
Reduced suction power.| Check and clean.
Suction power suddenly drops.| Stop the machine and empty the tank.

Technical specifications

TECHNICAL FEATURES

Guarantee conditions

1. “TEINNOVA” guarantees its products for a period of 15 days as regards aesthetic defects or faults which are noticeable with the naked eye. In terms of all other manufacturing defects and faults in the products, the guarantee is of 1 year.
   The “Buyer” must report the discovery of any defect as soon as they become aware of it and, in any case, within the maximum period of 5 days from when it becomes apparent. Notification thereof outside of said deadline shall lead to the non-application of the guarantee.
   “TEINNOVA” will collect and send the products to the factory or to the nearest official Technical Assistance Service for their obligatory inspection.
   At this point, it will be determined whether the guarantee can be applied or whether it falls under the guarantee exclusions. If the guarantee is applicable, the transport fees, both those for collecting the product from the client’s facilities and returning it there will be paid by TEINNOVA.
   If it is excluded from warranty (section 2 ), the transport, both collection at the customer’s premises and the return of the product, will be at the client’s expense.
   “TEINNOVA” reserves the right to dismiss the application of the guarantee in the event that the product shows no evidence of non-conformity.
   Equally, the application will not be accepted until the coverage has been explicitly approved. In the case that the product is covered, “TEINNOVA” can replace it or determine the necessary repair method.
   All repair works that are carried out under the product guarantee must be carried out in “TEINNOVA” facilities or in those of the party it designates.
   The guarantee covers the materials and labour required to repair or replace the parts or elements considered as defective from origin. The maximum guaranteed amount or value shall be the maximum price of the sale of the product to the “Buyer”.
   Any claims made under the coverage of the guarantee shall not grant the right to delay and/ or withhold payment of the corresponding invoice and/or any other pending invoices.

2. Guarantee Exclusions: The following are excluded from the guarantee: Intervening, handling and tampering with the product without the prior express authorisation of the Seller; indirect and/or consequential damage; damage caused by negligence, by improper use or by usage that does not conform to the instructions and intentional damage; faults due to adaptations made to the products or the use of parts that were not previously and expressly certified or authorised by the Seller; costs for detection of the fault; costs for collection or replacement (the latter two are unless the non-conformity is proven and within the limits established in section 1).

Declaration of conformity “CE”

MODEL: TEVAC
SERIAL NUMBER: HE72001040000 – HE72001049999
MANUFACTURER INFORMATION:
Manufacturer name: tecai innova s.l.
Telephone number:+34 941 44 50 56
Fax: +34 941 25 24 71
Web: www.teinnova.net
TECAI INNOVA, SL, under its sole responsibility, certifies that the machine model described above complies with all the essential requirements of the following directives:

• Machinery directive 2006/42/CE
• Directive 2014/30/EU on electromagnetic compatibility and its amendments.
• Directive 2014/35/EU on the sale of electrical equipment.

RESPONSIBLE FOR THE TECHNICAL DOSSIER:
Technical Director
Pol. Ind. Cantabria, C/Las Balsas 16
****signature: armando sáenz angulo
Technical Director
Made in Logroño el 17 January 2013

© This instruction manual is protected by copyright. We reserve all rights, especially the right to produce, translate and process with electronic systems.

teinnova.net
Technical Service
+34 674 837 357

References

• Duct cleaning equipment - Air duct cleaning and Kitchen exhaust cleaning equipment
• Duct cleaning equipment - Air duct cleaning and Kitchen exhaust cleaning equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>