LG StanbyME Portable Touchscreen TV Installation Guide
- June 13, 2024
- LG
Table of Contents
LG StanbyME Portable Touchscreen TV
Product Information
The product is a screen stand for a specific model of LG monitor. It is designed to securely hold the monitor in place and provide stability during use. The stand is made of durable materials and comes with all necessary screws and accessories for installation. The stand has a sleek design that complements the monitor’s appearance.
Product Usage Instructions
- Installation:
- Insert the stand base into the styrofoam groove as shown in the figure.
- Insert the bar into the hole of the stand base along the groove until it reaches the parting line.
- Secure the four screws to ensure the stand is firmly attached.
- Check the orientation of the power cable and cable holder:
- Ensure that the power plug is aligned correctly with the cable holder.
- Secure the power plug:
- Hold the screen and check the position of the power plug on the back cover.
- Tightly secure the power plug to the back cover side.
- Secure the screen to the stand:
- Insert the stand hook into the back cover groove and tighten it while pushing the lower part until you hear a [click] sound.
- Secure one screw to the cable holder.
- Secure the ring cover of the stand:
- Align the screen back cover and ring cover [mark] and install them.
- Ensure that the ring cover sits tightly in place.
- Disassembly:
- Position the screen vertically.
- Push the top of the screen lightly in the direction of the arrow to disassemble a part of the cover space.
- Use a wedge or pull it with your hand to completely disassemble the cover. Caution: Avoid pushing it hard to prevent damage.
- Position the screen horizontally and disassemble the cable holder screw.
- Lower the rear lever and push the bottom of the screen forward.
- Lift the screen, separate the top of the screen, and hold it.
- Keep the disassembled screen close to the stand at a distance of 10 cm or less.
- Press the plug lock, push it in the direction of the arrow, and then disassemble the screen completely.
- Lay the stand on the box packaging, remove the four screws, and then disassemble the stand bar.
BOX CONTENTS
Installation
-
A Insert the stand base into the styrofoam groove as shown in the figure.
B Insert the bar into the hole of the stand base along the groove until it reaches the parting line.
C Secure the four screws. -
Check the orientation of the power cable and cable holder.
-
Hold the screen and secure the power plug.
- A Check the position of the power plug on the back cover of the screen.
- B Secure it tightly to the back cover side.
-
Secure the screen to the stand.
- A Insert the stand hook into the back cover groove and tighten while pushing the lower part, as shown in the figure. (Push it until you hear a [click] sound.)
- B Secure one screw to the cable holder.
-
Secure the ring cover of the stand.
- A Align the screen back cover and ring cover [●mark] and install them.
- B Check if it sits tightly as shown in the figure.
Disassembly
- Position the screen vertically.
- Push the top of the screen lightly in the direction of the arrow to disassemble a part of the cover space.
- Use a wedge or pull it with your hand to completely disassemble the cover.
- Position the screen horizontally and disassemble the cable holder screw.
- Lower the rear lever and push the bottom of the screen forward, as shown in the figure.
- Lift the screen, separate the top of the screen, and hold the screen.
- Press the plug lock, push it in the direction of the arrow, and then disassemble the screen completely.
- Lay the stand on the box packaging, remove the four screws, and then disassemble the stand bar.
POWER ON/OFF
WEIGHT
CAUTION
Documents / Resources
| LG
StanbyME Portable Touchscreen
TV
[pdf] Installation Guide
MFL718845022201rev01, MFL71801972_04_Q_230322, M4L34, M4L10,
MFL718019722303rev04, StanbyME, StanbyME Portable Touchscreen TV, Portable
Touchscreen TV, Touchscreen TV, TV
---|---