Phigolf 2 PHG-200 Home Golf Simulator User Manual

Manual

Precautions

Warning
This product contains a lithium-polymer battery. Do not expose the product to a temperature of 60°C (140°) or higher. Stop using the product immediately i it emits smoke or a strange smell, or otherwise behaves abnormally. Do not disassemble the product or  break it into pieces. Avoid contact with liquid, and do not allow liquids or foreign objects inside. Do not ‘touch the product or the charger while charging the product. Store this equipment out of the reach of children and infants. Proper periodic maintenanceis  required as a malfunction of this product could resultin serious damage to the system or injury to personnel. Keep at least 2M distance from people or objects (e.g. TV, Furniture, etc.) around. Do not apply excessive force when nstalling a sensor. Make sure that  the head, strap, and grip are properly assembled. Do not use in any explosive, flammable, corrosive, humid environments or wet conditions nor near to such materials.
[LIMITATION OF LIABILITY AND ASSUMPTION OF RISKS]
Ihave reviewed the instruction and that | freely accept and fully assume all isks, dangers, and hazards associated with the use of the equipment. I am aware using this product involves many risks, dangers and hazards including, but not limited to slips and falls;  being hit by the disassembled products; causing property destruction by disassembled products; and negligence of other persons. I am familiar with the proper use of the equipment and I accept fullresponsibility for the care of the product. The product may not  be modified, copied, or reproduced. This product may not be used for unlawful purposes and that use is expressly prohibited under the terms and conditions of its use.

Package Content

Names and functions of the parts

How to use

How to mount
Place the device in the hole at the end of the grip or the swing trainer.
Push the sensor device into the grip until the stopper prevents the device from goingin further.

Your swing stick or club may have no or smaller hole in the grip end.

Power on

How to charge the battery
Remove the USB cover, connect the USB cable, and connect the other end of the USB cableinto a computer or an charger adapter. Charge the battery fully before first use of the product. Do not use an auxiliary battery to recharge the device. The device may not be recharged depending on the model no. ¢ USB charging cable specifi tions (Rated output 5V, 1.0A)

PHIGOLF Installing the application

Supporting OS environments
Android 6.0 (or later) /iOS 11 (or later)

Downloading and installing the application

1. Search PHIGOLF in Google Play or Apple Appstore.
2. Download and install the app.
3. When installation is completed, a PHIGOLF icon appears on the screen of the mobile device.

|
---|---
http://m.site.naver.com/0rKWn| http://m.site.naver.com/0rKX7

Connecting the product with the application
Before connecting the application with the mobile device, check if the mobile device supports the Bluetooth communication.
[Bluetooth ver. 4.1 or higher]

1. Switch on the Bluetooth function of the mobile device with the app.
2. Start the PHIGOLF app.
3. Push the power button on the product.
4. The product is automatically recognized by the menu screen of the app.
5. Touch the OK button to approve the product, and you can use all the functions of the app.

How to swing

1. 0n the swing standby screen, take the address with a club or swing stick with the device mounted on it.
2. Hold the address position until the Ready sign appears on the app.
3. Swing the club when the Ready sign appears. The Ready sign appears on the app screen with a tone, and the status LED of the product maintains the On position. (During Ready, even a small practice swing can be recognized asan actual swing)
4. fthe device fails to sense your swing, a failure message appears on the app screen. Take the address, and swing the club following the Ready sign.

Warranty

The warranty period is 1 year from the date of purchase of the product. No warranty is provided for a damage caused by the user, whether such damage i intentional or not, or force majeure.
To use the warranty service, send us the defective product with the receipt issued by the original seller by E-mail. For the defect within the category of warranty, the product wil be repaired, replaced or refunded.
Ifyou cannot contact the original seller, you can visit the website of Phigolf Networks (phigolf.store) to receive the warranty service.

Label in compliance with the Quality Control and Safety Management Act

This wireless device is subject o radio inteference. This product is EMC Class 8 device (home use).
Itis mainly intended foruse at home, but can be used inany place!

Tochargethe motionsensor

• Use the charging cable provided and a DC 5V, 1.0A wall charger.
• Portable charger and laptop or PC USB port may not charge the sensor properly or may delay the time.

When the motion sensor cannot be turned on

• Charge the battery for at least 2 hours.
• If the issue does not resolve, please contact us at info@phigolf.com for assistance.

Connecting the sensor with the Phigolf app

Once the sensor connected to the Phigolf app is inactive for 2 minutes, it will enter the sleep mode and temporarily stop all functions to reduce power consumption. If there is no operation for 8 minutes, the sensor will be automatically turned off.

To wake the device up from the sleep mode, press the sensor button or the [Wake up] button in the Phigolf app.

How to mirror your phone/tablet to TV?

1. Android to Smart TV
   Use Smart view, Miracast, etc.
   function to connect wirelessly.

2. Use mirroring cable:
   connect using USB type C or HDMI cable
   

For detailed information on how to mirror, please contact the TV, smart device or the mirroring cable manufacturer directly.

How to mirror your phone/tablet to TV?

B. Apple device to TV

|
---|---
1.iPhone/iPad to TV
using Apple Digital AV Adapter| 2. Use Airplay to
wirelessly connect to Apple TV

Depending on the maker & model of the smart phone & TV, connection methods can be different & are not described above.
Please contact the manufacturer for details if you had trouble connecting the two.

When Swing/Putt is not Recognized/Detected

|
---|---
Please do not waggle.
Take back swing/putt immediately after the App says “Ready Swing”.| If your hand touches the motion sensor during or after swing/putt, your swing, may not get recognized.

If the problem continues, please click [REPORT] button in the menu & email us at info@phigolf.com

How to use Safety Strap

Please install Safety Strap provided as illustrated, place/tighten it on a wrist and swing. Please use caution and swing the stick in safe space away from co-players, spectators, ceiling, furniture, etc.

Cannot get to Ready.Swing state

Sensor Installation

• Insert the sensor until the stopper on the mounting pin prevents it from going in further.
• Do NOT apply excessive force when installing a sensor.
• Insert it by gently turning right and left.

WARNING
If a swing trainer or head hits a human body or object, bodily injury or breakage may occur.
Make sure that the head, strap and grip are properly assembled.

Swing result maybe somewhat different from your actual swing

Motion sensor of Phigolf attached at the end of grip measures the speed, direction & angle of your swing. Based on the standard club spec & ball trajectory, your distance & trajectory of the ball after each swing is calculated and displayed. Therefore, there will be  a small margin of difference in the distance and the direction depending on the club spec (ie. Flex, Shaft length, etc.) and player’s swing habit. Please keep it in mind that the core technology used in Phigolf golf is motion sensing technology which has its inherent  limits. Since Phigolf sensor technology does not track the movement of ball, swing data will not be 100% accurate.

****WARNING

Show consideration for others by ensuring sufficient space.

• Keep at least 2M distance from people or objects (e.g., TV, furniture, etc.) around.

WARNING

Ensure to wrap the strap around the wrist and insert it to the swing stick and secure it with a stopper.

Grip replacement

Frequent use of the swing trainer may cause the grip surface  to wear out sooner. If the grip needs to be replaced, please visit your nearest golf retailer, golf course pro shop, or club fitting store. The cost of replacing the grips may vary depending on the model  selected and, in most cases, the club should be ready for use within a few hours. The grip on the swing trainer may be professionally replaced. However, we do not provide replacement instructions and we recommend that you contact the retailer where the grip was purchased for guidance.

WARNING

Any damages resulting from the user’s negligence will be his/her responsibility. PhiNetworks will NOT be responsible for them.

FCCID.
2ATLC-PHG-200
‘This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuantto Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferce in a residential installation. This  equipment generate, uses and can radiate: radio frequency energy and, ifnotinstalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will notoceur in a  particular installation. if this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to ry to correct the interference by one or more of the following  measures.

• Reorient or relocate the receiving antenna,
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet ona cicuit different from that to which the receiver is connecte.
• Consultthe dealer or an experienced radioTV technical for help.
• Only shielded interface cable should be used.

Finally, any changes or modifications to the equipment by the use not expressly approved by the grantee or manufacturer could void the users authority to operate such equipment.
This device complies with Part 15 ofthe FCC Rules. Operationis subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept anynterference received, including interference that may cause undesired  operation.
FCC RF Exposure Information
This equipment complies with FCC RF exposure imit requirements set for in an uncontrolled environment

CAUTION : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• Changes and modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• Itis desirable that it should be installed and operated with at least 20cm o more between the radiator and person’s body

Requirements for Phigolf

Apple| i0S 11 or newer on iPad Air 2+, iPad mini 4th Generation later, iPhone 6+, and products released since 2014
---|---
Android Device| 0S 6.0 or newer, Bluetooth 4.0 or newer, GPS On
TV Box| Apple TV, Android TV, Amazon TV, Bluetooth 4.0 or newer

Sensor LED Light

Documents / Resources

| Phigolf 2 PHG-200 Home Golf Simulator [pdf] User Manual
PHG-200 Home Golf Simulator, PHG-200, Home Golf Simulator, Golf Simulator, Simulator
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>