tp-link AP9635 Omada Pro Ceiling Mount Access Point Instructions

tp-link AP9635 Omada Pro Ceiling Mount Access Point

Product Information

The Ceiling Mount AP is a wireless access point designed for indoor use. It operates in various frequency bands and complies with regulatory standards to ensure safe and reliable operation. The device is manufactured by TP-Link USA Corporation and meets the applicable technical standards, including FCC part 15 and EU directives.

Regulatory Compliance:

• FCC Compliance: The device is approved for indoor use only. It should not be operated on oil platforms, cars, trains, boats, and aircraft, except for large aircraft flying above 10000 feet in the 5.925-6.425 GHz band. The use of transmitters in the 5.925-7.125 GHz band for unmanned aircraft systems is prohibited.
• CE Mark Warning: This product is classified as a class B device. In a domestic environment, it may cause radio interference, and users may be required to take necessary measures to address the interference.
• EU Declaration of Conformity: The device complies with the essential requirements and provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863.
• RF Exposure Information: The device meets EU requirements on the limitation of exposure to electromagnetic fields when used at a distance of 20cm from the body.
• National Restrictions: The device should not be used in road vehicles, trains, aircraft, or unmanned aircraft systems. The frequency band 5945-6425MHz is restricted to indoor use only.
• UKCA Mark: The device complies with the essential requirements of the Radio Equipment Regulations 2017 for use in Great Britain.
• Canadian Compliance Statement: The device is restricted to indoor use only in accordance with ISED regulations. It should not be used on oil platforms, cars, trains, boats, and aircraft, except for large aircraft flying above 10000 feet in the 5.925-6.425 GHz band. The use of transmitters in the 5.925-7.125 GHz band for unmanned aircraft systems is prohibited.

Product Usage Instructions

To use the Ceiling Mount AP:

1. Ensure that the device is installed indoors, as specified by the regulatory compliance information.
2. Connect the device to a power source using the provided power cable.
3. Follow the manufacturer’s instructions for initial setup and configuration of the access point.
4. Place the device in a suitable location, ensuring optimal wireless coverage within the desired area.
5. Connect your devices, such as computers or mobile devices, to the wireless network provided by the access point.
6. Configure the network settings and security features according to your requirements.
7. Monitor and maintain the device as recommended by the manufacturer to ensure proper operation.

For detailed usage instructions and troubleshooting, please refer to the user manual provided by TP-Link or visit their support website.

FCC Compliance Information Statement

Product Name : Omada Pro Ceiling Mount Access Point
Model Number : AP9635 / AP9650 / AP9670 / AP9778
Responsible party : TP-Link USA Corporation
Address : 10 Mauchly, Irvine, CA 92618
Website: https://www.tp-link.com/us/
Tel : +1 626 333 0234
Fax : +1 909 527 6804
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter.”

For AP9778:

FCC regulations restrict operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10000 feet in the 5.925-6.425 GHz band. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY (the maximum transmitted power)

For AP9635 / AP9650 / AP9670:

• 2412 MHz -2472 MHz (20dBm)
• 5150 MHz -5250 MHz (23dBm)
• 5250 MHz -5350 MHz (23dBm)
• 5470 MHz -5725 MHz (30dBm)

For AP9778:

• 2412 MHz -2472 MHz (20dBm)
• 5150 MHz -5250 MHz (23dBm)
• 5250 MHz -5350 MHz (23dBm)
• 5470 MHz -5725 MHz (30dBm)
• 5925MHz -6425 MHz (23dBm)

EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/.

RF Exposure Information

This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.
The device complies with RF specifications when the device used at 20cm from your body.

National Restrictions

• For AP9635 / AP9650 / AP9670:
  Frequency band: 5150 – 5250 MHz:

• Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or to the external body of road vehicles, a fixed infrastructure or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 – 5250 MHz band.

• Frequency band: 5250 – 5350 MHz:
  Indoor use: Inside buildings only. Installations and use in road vehicles, trains and aircraft are not permitted. Outdoor use is not permitted.

• Frequency band: 5470 – 5725 MHz:
  Installations and use in road vehicles, trains and aircraft and use for unmanned aircraft systems (UAS) are not permitted.

For AP9778:

• Frequency band: 5150 – 5250 MHz:
  Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or to the external body of road vehicles, a fixed infrastructure or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 – 5250 MHz band.

• Frequency band: 5250 – 5350 MHz:
  Indoor use: Inside buildings only. Installations and use in road vehicles, trains and aircraft are not permitted. Outdoor use is not permitted.

• Frequency band: 5470 – 5725 MHz:
  Installations and use in road vehicles, trains and aircraft and use for unmanned aircraft systems (UAS) are not permitted.

• Frequency band 5945 -6425MHz:
  Restricted to indoor use, including in trains with metal-coated windows and aircraft. Outdoor use, including in road vehicles, is not permitted.

UKCA Mark

UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
The original UK Declaration of Conformity may be found at https://www.tp- link.com/support/ukca
National Restrictions
Attention: This device may only be used indoors in Great Britain.

Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Caution
For AP9635:
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 5150 MHz to 5350 MHz is restricted to indoor operations in Hong Kong.

For AP9650 / AP9670 / AP9778:
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 5150 MHz to 5350 MHz is restricted to indoor operations in Hong Kong. DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz.

For AP9778:
ISED regulations restrict operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10000 feet in the 5.925-6.425 GHz band. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.

Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Industry Canada Statement CAN ICES-3 (B)/NMB-3(B)

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed
• Adapter shall be installed near the equipment and shall be easily accessible.
• Operating Temperature: 0℃ ~ 40℃ (32 ℉ ~ 104 ℉ )
• This product uses radios and other components that emit electromagnetic fields. Electromagnetic fields and magnets may interfere with pacemakers and other implanted medical devices. Always keep the product and its power adapter more than 15 cm (6 inches) away from any pacemakers or other implanted medical devices. If you suspect your product is interfering with your pacemaker or any other implanted medical device, turn off your product and consult your physician for information specific to your medical device.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label

Note : The product label can be found at the bottom of the product.

RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
User have the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

Mounting Requirements
For safety, we recommend you to use the original screws in the package when mounting. The following are alternatives to mount the device on the wall:

• Use 4 screws which comply with ANSI B1.1 4# standard and are longer than 15 mm.

References

• Link: Simple, secure one-click payments
• CE Regulatory Compliance | TP-Link
• Regulatory Compliance | TP-Link
• WiFi Networking Equipment for Home & Business | TP-Link

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>